
Load Specifications
Load data in caliber .300 Savage with .308 | 150gr | Hasler Hunting bullet and 48 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, Accurate 2520 and SNPE Vectan SP 10.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 22"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 82% | 45,498 psi | 86% | 2434 fps | 100% |
| Accurate 2015 | <<locked>> | 96% | 45,759 psi | 86% | 2520 fps | 99.8% |
| Accurate 2460 | <<locked>> | 94% | 47,427 psi | 90% | 2569 fps | 98.3% |
| Accurate 2495ᴾ | <<locked>> | 100% | 39,291 psi | 74% | 2484 fps | 99.4% |
| Accurate 2520 | <<locked>> | 98% | 47,529 psi | 90% | 2608 fps | 98% |
| Accurate 4064ᴾ | <<locked>> | 100% | 36,622 psi | 69% | 2448 fps | 96.8% |
| Accurate LT-30 | <<locked>> | 88% | 46,717 psi | 88% | 2451 fps | 99.2% |
| Accurate LT-32 | <<locked>> | 88% | 47,137 psi | 89% | 2461 fps | 97.8% |
| ADI AR 2207 | <<locked>> | 86% | 46,253 psi | 87% | 2493 fps | 100% |
| ADI AR 2219 | <<locked>> | 90% | 47,181 psi | 89% | 2582 fps | 99.2% |
| Alliant AR-Comp | <<locked>> | 98% | 45,339 psi | 86% | 2592 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 92% | 46,485 psi | 88% | 2543 fps | 100% |
| Alliant Reloder-7 | <<locked>> | 86% | 47,761 psi | 90% | 2500 fps | 100% |
| Baschieri & Pellagri 106 | <<locked>> | 88% | 44,889 psi | 85% | 2444 fps | 99.1% |
| Hodgdon Benchmark | <<locked>> | 94% | 45,687 psi | 86% | 2490 fps | 96.3% |
| Hodgdon BL-C2 | <<locked>> | 98% | 45,107 psi | 85% | 2585 fps | 96.3% |
| Hodgdon H322 | <<locked>> | 92% | 45,643 psi | 86% | 2559 fps | 99% |
| Hodgdon H335 | <<locked>> | 92% | 46,499 psi | 88% | 2575 fps | 98.3% |
| Hodgdon H4198 | <<locked>> | 84% | 45,701 psi | 86% | 2451 fps | 98.6% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 32,068 psi | 61% | 1552 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 45,803 psi | 87% | 2621 fps | 99.5% |
| IMR 4198 | <<locked>> | 90% | 45,629 psi | 86% | 2484 fps | 100% |
| Lovex D073.4 | <<locked>> | 86% | 44,759 psi | 85% | 2526 fps | 97.2% |
| Lovex D073.5 | <<locked>> | 94% | 47,311 psi | 89% | 2566 fps | 97.1% |
| Lovex D073.6ᴾ | <<locked>> | 100% | 44,875 psi | 85% | 2579 fps | 97.5% |
| Lovex S053 | <<locked>> | 82% | 47,471 psi | 90% | 2415 fps | 100% |
| Norma 200 | <<locked>> | 88% | 46,325 psi | 88% | 2523 fps | 100% |
| Norma 201ᴾ | <<locked>> | 100% | 46,456 psi | 88% | 2552 fps | 96% |
| Norma 202ᴾ | <<locked>> | 100% | 46,731 psi | 88% | 2579 fps | 98.4% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 32,053 psi | 61% | 1588 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 92% | 45,571 psi | 86% | 2533 fps | 97.2% |
| Rottweil R 901 | <<locked>> | 98% | 47,601 psi | 90% | 2559 fps | 98.3% |
| Shooters World AR Plus | <<locked>> | 86% | 44,759 psi | 85% | 2526 fps | 97.2% |
| Shooters World Match Rifleᴾ | <<locked>> | 100% | 44,875 psi | 85% | 2579 fps | 97.5% |
| SNPE Vectan BA6 1/2 | <<locked>> | 84% | 46,122 psi | 87% | 2254 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 90% | 47,819 psi | 90% | 2589 fps | 98.5% |
| SNPE Vectan SP 3 | <<locked>> | 92% | 47,776 psi | 90% | 2556 fps | 99.7% |
| SNPE Vectan Tubal 3000 | <<locked>> | 98% | 47,326 psi | 89% | 2497 fps | 98.3% |
| SNPE Vectan Tubal 5000ᴾ | <<locked>> | 100% | 40,393 psi | 76% | 2398 fps | 98% |
| Somchem S321 | <<locked>> | 94% | 45,556 psi | 86% | 2556 fps | 96% |
| Somchem S335 | <<locked>> | 98% | 45,687 psi | 86% | 2497 fps | 98.8% |
| Vihtavuori N120 | <<locked>> | 86% | 46,398 psi | 88% | 2451 fps | 100% |
| Vihtavuori N130 | <<locked>> | 94% | 47,239 psi | 89% | 2500 fps | 100% |
| Vihtavuori N133 | <<locked>> | 98% | 46,528 psi | 88% | 2500 fps | 99.8% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 41,437 psi | 78% | 2503 fps | 99.5% |
| Vihtavuori N140ᴾ | <<locked>> | 100% | 44,179 psi | 83% | 2513 fps | 98.2% |
| Vihtavuori N540ᴾ | <<locked>> | 100% | 42,279 psi | 80% | 2497 fps | 97.3% |
| Winchester 748 | <<locked>> | 98% | 46,572 psi | 88% | 2608 fps | 96.9% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 22"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 42,641 psi | 81% | 2388 fps | 99.9% |
| Accurate 2015 | <<locked>> | 80% | 27,383 psi | 52% | 2152 fps | 95.7% |
| Accurate 2460 | <<locked>> | 86% | 35,897 psi | 68% | 2365 fps | 95.5% |
| Accurate 2495 | <<locked>> | 88% | 25,947 psi | 49% | 2192 fps | 95.7% |
| Accurate 2520 | 37.2 gr | 90% | 35,766 psi | 68% | 2398 fps | 95% |
| Accurate 4064 | <<locked>> | 96% | 32,126 psi | 61% | 2352 fps | 95.2% |
| Accurate LT-30 | <<locked>> | 80% | 36,535 psi | 69% | 2270 fps | 97.3% |
| Accurate LT-32 | <<locked>> | 80% | 36,912 psi | 70% | 2277 fps | 95.2% |
| ADI AR 2207 | <<locked>> | 80% | 38,276 psi | 72% | 2365 fps | 100% |
| ADI AR 2219 | <<locked>> | 80% | 33,736 psi | 64% | 2329 fps | 96.2% |
| Alliant AR-Comp | <<locked>> | 80% | 25,193 psi | 48% | 2159 fps | 97.3% |
| Alliant Reloder-10x | <<locked>> | 80% | 31,952 psi | 60% | 2274 fps | 98.4% |
| Alliant Reloder-7 | <<locked>> | 80% | 39,494 psi | 75% | 2369 fps | 99.8% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 34,519 psi | 65% | 2254 fps | 97% |
| Hodgdon Benchmark | <<locked>> | 92% | 42,946 psi | 81% | 2441 fps | 95.6% |
| Hodgdon BL-C2 | <<locked>> | 96% | 42,221 psi | 80% | 2536 fps | 95.5% |
| Hodgdon H322 | 31.3 gr | 80% | 30,777 psi | 58% | 2260 fps | 95% |
| Hodgdon H335 | <<locked>> | 84% | 35,505 psi | 67% | 2372 fps | 95.6% |
| Hodgdon H4198 | <<locked>> | 80% | 40,364 psi | 76% | 2356 fps | 97.6% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,641 psi | 45% | 1385 fps | 100% |
| IMR 3031 | <<locked>> | 86% | 29,283 psi | 55% | 2277 fps | 95.3% |
| IMR 4198 | <<locked>> | 80% | 33,939 psi | 64% | 2270 fps | 99.4% |
| Lovex D073.4 | <<locked>> | 82% | 38,682 psi | 73% | 2418 fps | 95.6% |
| Lovex D073.5 | <<locked>> | 90% | 40,988 psi | 77% | 2461 fps | 95.6% |
| Lovex D073.6 | <<locked>> | 94% | 36,448 psi | 69% | 2425 fps | 95.2% |
| Lovex S053 | <<locked>> | 80% | 44,773 psi | 85% | 2375 fps | 100% |
| Norma 200 | <<locked>> | 80% | 36,042 psi | 68% | 2346 fps | 99.6% |
| Norma 201 | <<locked>> | 98% | 43,859 psi | 83% | 2507 fps | 95.3% |
| Norma 202 | <<locked>> | 90% | 33,721 psi | 64% | 2339 fps | 95.1% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 23,482 psi | 44% | 1417 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 86% | 37,449 psi | 71% | 2385 fps | 95% |
| Rottweil R 901 | <<locked>> | 88% | 35,244 psi | 67% | 2333 fps | 95.3% |
| Shooters World AR Plus | <<locked>> | 82% | 38,682 psi | 73% | 2418 fps | 95.6% |
| Shooters World Match Rifle | <<locked>> | 94% | 36,448 psi | 69% | 2425 fps | 95.2% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 41,350 psi | 78% | 2188 fps | 100% |
| SNPE Vectan SP 10 | 34.3 gr | 82% | 36,274 psi | 69% | 2379 fps | 95.8% |
| SNPE Vectan SP 3 | <<locked>> | 80% | 32,735 psi | 62% | 2277 fps | 96.9% |
| SNPE Vectan Tubal 3000 | <<locked>> | 88% | 34,577 psi | 65% | 2267 fps | 95.2% |
| SNPE Vectan Tubal 5000 | <<locked>> | 92% | 31,459 psi | 59% | 2218 fps | 95.3% |
| Somchem S321 | <<locked>> | 92% | 42,714 psi | 81% | 2507 fps | 95.3% |
| Somchem S335 | <<locked>> | 86% | 31,517 psi | 60% | 2224 fps | 95.2% |
| Vihtavuori N120 | <<locked>> | 80% | 38,450 psi | 73% | 2329 fps | 100% |
| Vihtavuori N130 | <<locked>> | 80% | 30,893 psi | 58% | 2198 fps | 97.9% |
| Vihtavuori N133 | <<locked>> | 80% | 26,789 psi | 51% | 2106 fps | 95.1% |
| Vihtavuori N135 | <<locked>> | 86% | 26,527 psi | 50% | 2178 fps | 95.5% |
| Vihtavuori N140 | <<locked>> | 92% | 34,272 psi | 65% | 2326 fps | 95.6% |
| Vihtavuori N540 | <<locked>> | 94% | 34,809 psi | 66% | 2352 fps | 95.1% |
| Winchester 748 | <<locked>> | 94% | 40,915 psi | 77% | 2507 fps | 95.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 48 powders for .300 Savage loaded with the .308 | 150gr | Hasler Hunting. IMR 3031 delivers the highest muzzle velocity at 2,621 fps; across all powders the maximum-charge window runs from 1,552 fps to 2,621 fps. Accurate 2495 gives the best case fill at 100 %, and 48 of the 48 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (365 MPa), the top charges use 61–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.308" calls for a 1:12.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Accurate 4064, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, Accurate 2520, SNPE Vectan SP 10 rank at the top here: for .300 Savage with the .308 | 150gr | Hasler Hunting they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.