Load data for .300 Savage + .308 | 150gr | CutEdge MTH

.300 Savage cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:150 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):1.87"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:52.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:22"
Max. allowed Pressure:52,939 psi
Recommended Twist Rate:1:12.0

Load data in caliber .300 Savage with .308 | 150gr | CutEdge MTH bullet and 50 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 22"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>82%46,079 psi87%2451 fps100%
Accurate 2015<<locked>>96%46,412 psi88%2536 fps99.9%
Accurate 2460<<locked>>92%44,846 psi85%2533 fps97.9%
Accurate 2495ᴾ<<locked>>100%40,277 psi76%2507 fps99.5%
Accurate 2520<<locked>>96%45,208 psi85%2579 fps97.7%
Accurate 4064ᴾ<<locked>>100%37,507 psi71%2470 fps97.1%
Accurate LT-30<<locked>>88%47,311 psi89%2470 fps99.3%
Accurate LT-32<<locked>>88%47,732 psi90%2477 fps98%
ADI AR 2207<<locked>>86%47,050 psi89%2510 fps100%
ADI AR 2219<<locked>>88%45,121 psi85%2559 fps99%
ADI Benchmark 8208<<locked>>96%46,006 psi87%2549 fps95.9%
Alliant AR-Comp<<locked>>98%45,934 psi87%2608 fps100%
Alliant Reloder-10x<<locked>>92%47,224 psi89%2562 fps100%
Alliant Reloder-7<<locked>>84%45,440 psi86%2474 fps100%
Baschieri & Pellagri 106<<locked>>88%45,672 psi86%2464 fps99.3%
Hodgdon Benchmark<<locked>>94%46,224 psi87%2507 fps96.6%
Hodgdon BL-C2<<locked>>98%45,876 psi87%2605 fps96.6%
Hodgdon H322<<locked>>92%46,615 psi88%2582 fps99.2%
Hodgdon H335<<locked>>92%47,398 psi90%2598 fps98.6%
Hodgdon H4198<<locked>>84%46,354 psi88%2467 fps98.8%
Hodgdon TrailBossᴾ<<locked>>100%32,169 psi61%1558 fps100%
IMR 3031ᴾ<<locked>>100%46,354 psi88%2638 fps99.7%
IMR 4198<<locked>>90%46,340 psi88%2500 fps100%
IMR 8208 XBR<<locked>>96%46,006 psi87%2549 fps95.9%
Lovex D073.4<<locked>>86%45,745 psi86%2552 fps97.5%
Lovex D073.5<<locked>>92%45,063 psi85%2536 fps96.7%
Lovex D073.6ᴾ<<locked>>100%45,745 psi86%2598 fps97.7%
Norma 200<<locked>>88%47,036 psi89%2539 fps100%
Norma 201ᴾ<<locked>>100%47,340 psi89%2572 fps96.3%
Norma 202ᴾ<<locked>>100%47,224 psi89%2595 fps98.6%
ReloadSwiss RS 14ᴾ<<locked>>100%32,169 psi61%1598 fps100%
ReloadSwiss RS 40<<locked>>92%46,122 psi87%2552 fps97.4%
Rottweil R 901<<locked>>96%45,600 psi86%2536 fps98.1%
Shooters World AR Plus<<locked>>86%45,745 psi86%2552 fps97.5%
Shooters World Match Rifleᴾ<<locked>>100%45,745 psi86%2598 fps97.7%
SNPE Vectan BA6 1/2<<locked>>84%46,601 psi88%2267 fps100%
SNPE Vectan SP 10<<locked>>88%45,324 psi86%2556 fps98.2%
SNPE Vectan SP 3<<locked>>90%45,687 psi86%2530 fps99.5%
SNPE Vectan Tubal 3000<<locked>>96%45,136 psi85%2470 fps98.1%
SNPE Vectan Tubal 5000ᴾ<<locked>>100%40,843 psi77%2415 fps98.2%
Somchem S321<<locked>>94%46,369 psi88%2579 fps96.3%
Somchem S335<<locked>>98%46,166 psi87%2510 fps99%
Vihtavuori N120<<locked>>86%47,152 psi89%2467 fps100%
Vihtavuori N130<<locked>>92%45,194 psi85%2474 fps100%
Vihtavuori N133<<locked>>98%47,485 psi90%2520 fps99.9%
Vihtavuori N135ᴾ<<locked>>100%42,032 psi79%2520 fps99.6%
Vihtavuori N140ᴾ<<locked>>100%45,020 psi85%2536 fps98.5%
Vihtavuori N530<<locked>>96%46,354 psi88%2546 fps96%
Vihtavuori N540ᴾ<<locked>>100%43,004 psi81%2516 fps97.6%
Winchester 748<<locked>>98%47,340 psi89%2628 fps97.2%

Start Load - Barrel Length: 22"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%43,207 psi82%2405 fps99.9%
Accurate 2015<<locked>>80%27,760 psi52%2169 fps96%
Accurate 2460<<locked>>84%34,098 psi64%2333 fps95%
Accurate 2495<<locked>>86%24,903 psi47%2169 fps95.2%
Accurate 2520<<locked>>90%36,564 psi69%2421 fps95.4%
Accurate 4064<<locked>>96%32,967 psi62%2379 fps95.7%
Accurate LT-30<<locked>>80%37,144 psi70%2290 fps97.5%
Accurate LT-32<<locked>>80%37,521 psi71%2297 fps95.6%
ADI AR 2207<<locked>>80%39,059 psi74%2385 fps100%
ADI AR 2219<<locked>>80%34,316 psi65%2349 fps96.5%
ADI Benchmark 8208<<locked>>94%43,178 psi82%2500 fps95.1%
Alliant AR-Comp<<locked>>80%25,686 psi49%2178 fps97.7%
Alliant Reloder-10x<<locked>>80%32,343 psi61%2287 fps98.6%
Alliant Reloder-7<<locked>>80%40,190 psi76%2385 fps99.9%
Baschieri & Pellagri 106<<locked>>80%34,983 psi66%2270 fps97.2%
Hodgdon Benchmark<<locked>>90%41,118 psi78%2418 fps95.3%
Hodgdon BL-C2<<locked>>94%39,943 psi75%2500 fps95%
Hodgdon H322<<locked>>80%31,314 psi59%2277 fps95.4%
Hodgdon H335<<locked>>82%33,779 psi64%2339 fps95.1%
Hodgdon H4198<<locked>>80%41,060 psi78%2375 fps97.9%
Hodgdon TrailBoss<<locked>>80%23,554 psi44%1388 fps100%
IMR 3031<<locked>>86%29,805 psi56%2297 fps95.7%
IMR 4198<<locked>>80%34,330 psi65%2287 fps99.5%
IMR 8208 XBR<<locked>>94%43,178 psi82%2500 fps95.1%
Lovex D073.4<<locked>>80%36,709 psi69%2385 fps95.1%
Lovex D073.5<<locked>>88%39,131 psi74%2431 fps95.2%
Lovex D073.6<<locked>>94%36,941 psi70%2441 fps95.5%
Norma 200<<locked>>80%36,434 psi69%2359 fps99.7%
Norma 201<<locked>>98%44,353 psi84%2523 fps95.6%
Norma 202<<locked>>90%34,258 psi65%2356 fps95.4%
ReloadSwiss RS 14<<locked>>80%23,395 psi44%1421 fps100%
ReloadSwiss RS 40<<locked>>86%37,956 psi72%2402 fps95.3%
Rottweil R 901<<locked>>88%35,853 psi68%2352 fps95.7%
Shooters World AR Plus<<locked>>80%36,709 psi69%2385 fps95.1%
Shooters World Match Rifle<<locked>>94%36,941 psi70%2441 fps95.5%
SNPE Vectan BA6 1/2<<locked>>80%41,872 psi79%2201 fps100%
SNPE Vectan SP 10<<locked>>80%34,519 psi65%2349 fps95.3%
SNPE Vectan SP 3<<locked>>80%33,127 psi63%2293 fps97.1%
SNPE Vectan Tubal 3000<<locked>>88%35,114 psi66%2287 fps95.5%
SNPE Vectan Tubal 5000<<locked>>92%31,894 psi60%2234 fps95.6%
Somchem S321<<locked>>92%43,497 psi82%2530 fps95.6%
Somchem S335<<locked>>86%32,024 psi60%2244 fps95.6%
Vihtavuori N120<<locked>>80%39,218 psi74%2349 fps100%
Vihtavuori N130<<locked>>80%31,241 psi59%2211 fps98.1%
Vihtavuori N133<<locked>>80%27,093 psi51%2119 fps95.4%
Vihtavuori N135<<locked>>86%27,021 psi51%2198 fps95.8%
Vihtavuori N140<<locked>>90%32,576 psi62%2297 fps95.1%
Vihtavuori N530<<locked>>94%43,352 psi82%2497 fps95.2%
Vihtavuori N540<<locked>>94%35,520 psi67%2375 fps95.5%
Winchester 748<<locked>>94%41,307 psi78%2523 fps95.6%

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 50 powders for .300 Savage loaded with the .308 | 150gr | CutEdge MTH. IMR 3031 delivers the highest muzzle velocity at 2,638 fps; across all powders the maximum-charge window runs from 1,558 fps to 2,638 fps. Accurate 2495 gives the best case fill at 100 %, and 50 of the 50 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (365 MPa), the top charges use 61–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.308" calls for a 1:12.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Accurate 4064, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data