
Load Specifications
Load data in caliber .300 Savage with .308 | 135gr | CutEdge ER Raptor bullet and 35 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H335, Hodgdon H322 and ADI AR 2219.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 22"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 86% | 46,267 psi | 87% | 2552 fps | 99.6% |
| Accurate 2015ᴾ | <<locked>> | 100% | 44,498 psi | 84% | 2608 fps | 98.9% |
| Accurate 2460 | <<locked>> | 98% | 46,267 psi | 87% | 2654 fps | 96.5% |
| Accurate 2495ᴾ | <<locked>> | 100% | 32,227 psi | 61% | 2454 fps | 96.5% |
| Accurate LT-30 | <<locked>> | 92% | 47,181 psi | 89% | 2559 fps | 98.1% |
| Accurate LT-32 | <<locked>> | 92% | 47,703 psi | 90% | 2562 fps | 96.2% |
| ADI AR 2207 | <<locked>> | 90% | 45,730 psi | 86% | 2608 fps | 100% |
| ADI AR 2219 | <<locked>> | 94% | 46,876 psi | 89% | 2680 fps | 97.9% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 41,249 psi | 78% | 2635 fps | 99.9% |
| Alliant Reloder-10x | <<locked>> | 96% | 45,629 psi | 86% | 2644 fps | 99.6% |
| Alliant Reloder-7 | <<locked>> | 90% | 47,674 psi | 90% | 2615 fps | 99.9% |
| Baschieri & Pellagri 106 | <<locked>> | 92% | 45,150 psi | 85% | 2546 fps | 98% |
| Hodgdon H322 | <<locked>> | 96% | 45,237 psi | 85% | 2654 fps | 97.6% |
| Hodgdon H335 | <<locked>> | 96% | 46,180 psi | 87% | 2671 fps | 96.7% |
| Hodgdon H4198 | <<locked>> | 88% | 45,977 psi | 87% | 2552 fps | 97.3% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 30,995 psi | 59% | 1604 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 39,276 psi | 74% | 2602 fps | 97% |
| IMR 4198 | <<locked>> | 94% | 45,585 psi | 86% | 2595 fps | 99.9% |
| IMR 4227 | <<locked>> | 84% | 46,456 psi | 88% | 2539 fps | 100% |
| Lovex D073.4 | <<locked>> | 92% | 47,630 psi | 90% | 2677 fps | 96.1% |
| Lovex S053 | <<locked>> | 86% | 47,790 psi | 90% | 2539 fps | 100% |
| Norma 200 | <<locked>> | 92% | 45,629 psi | 86% | 2631 fps | 99.9% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 30,850 psi | 58% | 1644 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 84% | 45,701 psi | 86% | 2569 fps | 100% |
| Rottweil R 901ᴾ | <<locked>> | 100% | 43,801 psi | 83% | 2602 fps | 96% |
| Shooters World AR Plus | <<locked>> | 92% | 47,630 psi | 90% | 2677 fps | 96.1% |
| SNPE Vectan BA6 1/2 | <<locked>> | 88% | 46,238 psi | 87% | 2375 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 94% | 47,282 psi | 89% | 2684 fps | 96.9% |
| SNPE Vectan SP 3 | <<locked>> | 96% | 47,021 psi | 89% | 2654 fps | 98.7% |
| SNPE Vectan Tubal 3000ᴾ | <<locked>> | 100% | 44,063 psi | 83% | 2539 fps | 96% |
| Somchem S335ᴾ | <<locked>> | 100% | 41,974 psi | 79% | 2533 fps | 96.6% |
| Vihtavuori N120 | <<locked>> | 90% | 45,977 psi | 87% | 2569 fps | 100% |
| Vihtavuori N130 | <<locked>> | 98% | 46,789 psi | 88% | 2602 fps | 99.6% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 43,047 psi | 81% | 2546 fps | 98.4% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 35,114 psi | 66% | 2484 fps | 97% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 22"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 38,000 psi | 72% | 2408 fps | 98.4% |
| Accurate 2015 | <<locked>> | 88% | 30,298 psi | 57% | 2323 fps | 95.1% |
| Accurate 2460 | <<locked>> | 94% | 40,437 psi | 76% | 2552 fps | 95% |
| Accurate 2495 | <<locked>> | 98% | 30,110 psi | 57% | 2405 fps | 95.7% |
| Accurate LT-30 | <<locked>> | 84% | 36,854 psi | 70% | 2372 fps | 95.6% |
| Accurate LT-32 | <<locked>> | 90% | 44,947 psi | 85% | 2516 fps | 95.6% |
| ADI AR 2207 | <<locked>> | 80% | 33,315 psi | 63% | 2382 fps | 99.8% |
| ADI AR 2219 | 34 gr | 88% | 38,377 psi | 72% | 2523 fps | 95.8% |
| Alliant AR-Comp | <<locked>> | 86% | 26,397 psi | 50% | 2280 fps | 95.9% |
| Alliant Reloder-10x | <<locked>> | 80% | 27,615 psi | 52% | 2267 fps | 95.3% |
| Alliant Reloder-7 | <<locked>> | 80% | 34,896 psi | 66% | 2382 fps | 98.3% |
| Baschieri & Pellagri 106 | <<locked>> | 84% | 34,592 psi | 65% | 2349 fps | 95.2% |
| Hodgdon H322 | 33.7 gr | 90% | 37,391 psi | 71% | 2503 fps | 95.4% |
| Hodgdon H335 | 36.8 gr | 92% | 40,335 psi | 76% | 2566 fps | 95.1% |
| Hodgdon H4198 | <<locked>> | 82% | 38,392 psi | 73% | 2411 fps | 95.4% |
| Hodgdon TrailBoss | <<locked>> | 80% | 22,713 psi | 43% | 1430 fps | 100% |
| IMR 3031 | <<locked>> | 96% | 34,476 psi | 65% | 2497 fps | 95.4% |
| IMR 4198 | <<locked>> | 80% | 30,240 psi | 57% | 2280 fps | 97.2% |
| IMR 4227 | <<locked>> | 80% | 40,959 psi | 77% | 2451 fps | 100% |
| Lovex D073.4 | <<locked>> | 90% | 44,280 psi | 84% | 2621 fps | 95.3% |
| Lovex S053 | <<locked>> | 80% | 40,161 psi | 76% | 2418 fps | 100% |
| Norma 200 | <<locked>> | 80% | 30,951 psi | 58% | 2339 fps | 97.5% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 22,466 psi | 42% | 1467 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 40,161 psi | 76% | 2474 fps | 99.9% |
| Rottweil R 901 | <<locked>> | 98% | 41,249 psi | 78% | 2552 fps | 95.3% |
| Shooters World AR Plus | <<locked>> | 90% | 44,280 psi | 84% | 2621 fps | 95.3% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 37,420 psi | 71% | 2241 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 90% | 41,278 psi | 78% | 2579 fps | 95.4% |
| SNPE Vectan SP 3 | <<locked>> | 86% | 34,243 psi | 65% | 2408 fps | 95.6% |
| SNPE Vectan Tubal 3000 | <<locked>> | 98% | 41,365 psi | 78% | 2493 fps | 95.3% |
| Somchem S335 | <<locked>> | 96% | 37,275 psi | 70% | 2444 fps | 95.3% |
| Vihtavuori N120 | <<locked>> | 80% | 33,576 psi | 63% | 2356 fps | 100% |
| Vihtavuori N130 | <<locked>> | 82% | 28,456 psi | 54% | 2234 fps | 95.3% |
| Vihtavuori N133 | <<locked>> | 90% | 31,821 psi | 60% | 2323 fps | 95.4% |
| Vihtavuori N135 | <<locked>> | 96% | 31,024 psi | 59% | 2388 fps | 95.5% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 35 powders for .300 Savage loaded with the .308 | 135gr | CutEdge ER Raptor. SNPE Vectan SP 10 delivers the highest muzzle velocity at 2,684 fps; across all powders the maximum-charge window runs from 1,604 fps to 2,684 fps. Accurate 2015 gives the best case fill at 100 %, and 35 of the 35 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (365 MPa), the top charges use 58–90 %, leaving at least 10 % headroom. The 135.0 gr projectile in 0.308" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H335, Hodgdon H322, ADI AR 2219 rank at the top here: for .300 Savage with the .308 | 135gr | CutEdge ER Raptor they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.