Load data for .300 CR + .311 | 90gr | Inceptor SRR

.300 CR cartridge drawing
Inceptor logo

Load Specifications

Bullet Manufacturer:Inceptor
Bullet Weight:90 gr
Bullet Diameter:0.311"
Bullet Length:<<locked>>
Case Length (l3):2"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:53 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:62,366 psi
Recommended Twist Rate:1:12.0

Load data in caliber .300 CR with .311 | 90gr | Inceptor SRR bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Shooters World Buffalo Rifle, Lovex D060 and ReloadSwiss RS 36.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>96%55,158 psi88%3333 fps98.9%
Accurate 5744<<locked>>82%53,867 psi86%3373 fps99.3%
Accurate LT-30ᴾ<<locked>>100%51,372 psi82%3251 fps95.9%
Accurate No. 11 FS<<locked>>84%53,664 psi86%3307 fps100%
ADI APS 450<<locked>>82%54,926 psi88%2569 fps100%
ADI AR 2205<<locked>>88%54,578 psi88%3228 fps100%
ADI AR 2207ᴾ<<locked>>100%51,735 psi83%3392 fps100%
Alliant Reloder-10xᴾ<<locked>>100%42,511 psi68%3235 fps97%
Alliant Reloder-7ᴾ<<locked>>100%54,665 psi88%3392 fps99.3%
Baschieri & Pellagri 106ᴾ<<locked>>100%49,545 psi79%3228 fps95.9%
Hodgdon TrailBossᴾ<<locked>>100%29,370 psi47%2047 fps100%
IMR 4198ᴾ<<locked>>100%45,571 psi73%3241 fps98.3%
IMR 4227<<locked>>94%53,766 psi86%3330 fps99.9%
Lovex D060<<locked>>88%54,259 psi87%3379 fps99.3%
Lovex D063<<locked>>84%54,795 psi88%3356 fps99.4%
Lovex S040<<locked>>82%55,912 psi90%3241 fps100%
Lovex S053<<locked>>96%54,230 psi87%3320 fps100%
Norma 200ᴾ<<locked>>100%48,370 psi78%3340 fps98.8%
ReloadSwiss RS 14ᴾ<<locked>>100%28,558 psi46%2083 fps100%
ReloadSwiss RS 36<<locked>>96%56,376 psi90%3412 fps100%
Shooters World Blackout<<locked>>84%54,795 psi88%3356 fps99.4%
Shooters World Buffalo Rifle<<locked>>88%54,259 psi87%3379 fps99.3%
Shooters World SOCOM<<locked>>88%56,188 psi90%3350 fps99.8%
SNPE Vectan BA6 1/2ᴾ<<locked>>100%54,897 psi88%3159 fps100%
Vihtavuori N110<<locked>>90%53,708 psi86%3238 fps100%
Vihtavuori N120ᴾ<<locked>>100%51,880 psi83%3340 fps100%
Vihtavuori N130ᴾ<<locked>>100%41,452 psi66%3130 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%36,637 psi59%2969 fps95%
Accurate 5744<<locked>>80%50,792 psi81%3317 fps98.9%
Accurate LT-30<<locked>>98%48,414 psi78%3196 fps95.2%
Accurate No. 11 FS<<locked>>80%46,862 psi75%3192 fps99.9%
ADI APS 450<<locked>>80%52,779 psi85%2533 fps100%
ADI AR 2205<<locked>>80%42,627 psi68%3022 fps100%
ADI AR 2207<<locked>>80%27,079 psi43%2818 fps95.7%
Alliant Reloder-10x<<locked>>96%37,159 psi60%3110 fps95.4%
Alliant Reloder-7<<locked>>86%34,911 psi56%2982 fps95.2%
Baschieri & Pellagri 106<<locked>>98%46,427 psi74%3169 fps95.2%
Hodgdon TrailBoss<<locked>>80%21,089 psi34%1824 fps100%
IMR 4198<<locked>>90%34,258 psi55%2969 fps95.2%
IMR 4227<<locked>>80%34,635 psi56%2933 fps97.1%
Lovex D06032.3 gr80%42,743 psi69%3146 fps97.5%
Lovex D063<<locked>>80%47,790 psi77%3232 fps98.6%
Lovex S040<<locked>>80%52,504 psi84%3189 fps100%
Lovex S053<<locked>>80%33,721 psi54%2917 fps99.4%
Norma 200<<locked>>90%34,548 psi55%3035 fps95.5%
ReloadSwiss RS 14<<locked>>80%20,827 psi33%1870 fps100%
ReloadSwiss RS 3633.6 gr80%33,576 psi54%2946 fps96.6%
Shooters World Blackout<<locked>>80%47,790 psi77%3232 fps98.6%
Shooters World Buffalo Rifle32.3 gr80%42,743 psi69%3146 fps97.5%
Shooters World SOCOM<<locked>>80%42,772 psi69%3107 fps98.2%
SNPE Vectan BA6 1/2<<locked>>80%31,836 psi51%2749 fps100%
Vihtavuori N110<<locked>>80%39,755 psi64%3002 fps100%
Vihtavuori N120<<locked>>80%27,412 psi44%2795 fps97.2%
Vihtavuori N130<<locked>>98%38,667 psi62%3068 fps95.5%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .300 CR loaded with the .311 | 90gr | Inceptor SRR. ReloadSwiss RS 36 delivers the highest muzzle velocity at 3,412 fps; across all powders the maximum-charge window runs from 2,047 fps to 3,412 fps. Accurate LT-30 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (430 MPa), the top charges use 46–90 %, leaving at least 10 % headroom. The 90.0 gr projectile in 0.311" calls for a 1:12.0 twist; slower twists will usually not stabilise this weight. Accurate LT-30, ADI AR 2207, Alliant Reloder-10x reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Shooters World Buffalo Rifle, Lovex D060, ReloadSwiss RS 36 rank at the top here: for .300 CR with the .311 | 90gr | Inceptor SRR they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data