top of page

Load data for .300 AAC Blackout + .308 | 190gr | MEN HPBT Match

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s): ADI AR 2207, Alliant Reloder-7, IMR 4227, Norma 200, ReloadSwiss RS 36

.300 AAC Blackout + .308 | 190gr | MEN HPBT Match

Load Specifications

Bullet:
.308 | 190gr | MEN HPBT Match
Bullet Weight:
190gr | 12.3g
Bullet Diameter:
0.308" | 7.82mm
Bullet Length:
1.000" | 25.4mm
Caliber:
.300 AAC Blackout
Case Length (l3):
1.367" | 34.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.141" | 3.6mm
Shank Seated Depth:
0.141" | 3.6mm
Case Capacity:
25.1 Grains of Water | 1.63 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
50763 psi | 3500 bar
LID:
LID_B3785_C348

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 42 loads in caliber .300 AAC Blackout with .308 | 190gr | MEN HPBT Match bullet and 21 powders such as ADI AR 2207, Alliant Reloder-7, IMR 4227, Norma 200, ReloadSwiss RS 36. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
96%
41350
81%
**70
100%
ADI AR 2219
<<locked>>
97%
39291
77%
**50
95%
Accurate 1680
<<locked>>
88%
44454
88%
**57
97%
Accurate 2015
<<locked>>
97%
30908
61%
**36
95%
Alliant AR-Comp
<<locked>>
96%
28224
56%
**06
96%
Alliant Reloder-10x
<<locked>>
96%
34519
68%
**98
97%
Alliant Reloder-7 👍
<<locked>>
96%
45005
89%
**80
99%
Baschieri & Pellagri 106
<<locked>>
96%
40263
79%
**95
96%
[Hodgdon H322]*
<<locked>>
96%
32082
63%
**32
92%
[Hodgdon H335]*
<<locked>>
96%
37985
75%
**37
93%
Hodgdon H4198
<<locked>>
97%
44904
88%
**37
96%
IMR 4198
<<locked>>
96%
37956
75%
**88
98%
IMR 4227 👍
<<locked>>
90%
45469
90%
**37
100%
Lovex S053
<<locked>>
91%
43642
86%
**11
100%
Norma 200 👍
<<locked>>
96%
38580
76%
**50
99%
ReloadSwiss RS 36 👍
<<locked>>
90%
43816
86%
**57
100%
SNPE Vectan BA6 1/2
<<locked>>
94%
43976
87%
**09
100%
[SNPE Vectan SP 10]*
<<locked>>
96%
38566
76%
**47
93%
Vihtavuori N110
<<locked>>
84%
43758
86%
**55
100%
Vihtavuori N120
<<locked>>
96%
38261
75%
**01
100%
Vihtavuori N130
<<locked>>
96%
32648
64%
**19
96%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
26818
53%
**47
98%
[ADI AR 2219]*
<<locked>>
88%
30081
59%
**96
91%
Accurate 1680
<<locked>>
81%
35201
69%
**29
95%
[Accurate 2015]*
<<locked>>
92%
26963
53%
**57
93%
[Alliant AR-Comp]*
<<locked>>
93%
25759
51%
**50
94%
[Alliant Reloder-10x]*
<<locked>>
87%
26034
51%
**44
94%
Alliant Reloder-7
<<locked>>
82%
29530
58%
**57
96%
[Baschieri & Pellagri 106]*
<<locked>>
88%
31328
62%
**60
92%
[Hodgdon H322]*
<<locked>>
93%
29486
58%
**83
90%
[Hodgdon H335]*
<<locked>>
92%
33156
65%
**59
91%
[Hodgdon H4198]*
<<locked>>
86%
32489
64%
**57
92%
IMR 4198
<<locked>>
87%
30226
60%
**60
96%
IMR 4227
<<locked>>
81%
33852
67%
**86
99%
Lovex S053
<<locked>>
81%
33040
65%
**70
100%
Norma 200
<<locked>>
84%
26498
52%
**50
95%
ReloadSwiss RS 36
<<locked>>
81%
33156
65%
**09
99%
SNPE Vectan BA6 1/2
<<locked>>
88%
38116
75%
**44
100%
[SNPE Vectan SP 10]*
<<locked>>
91%
32256
64%
**45
90%
Vihtavuori N110
<<locked>>
81%
39682
78%
**09
100%
Vihtavuori N120
<<locked>>
86%
28921
57%
**57
100%
Vihtavuori N130
<<locked>>
91%
28326
56%
**44
95%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page