Load data for .30 Super Fl. H&H + .311 | 180gr | Sellier & Bellot SPRN

.30 Super Fl. H&H cartridge drawing
Sellier & Bellot logo

Load Specifications

Bullet Manufacturer:Sellier & Bellot
Bullet Weight:180 gr
Bullet Diameter:0.311"
Bullet Length:<<locked>>
Case Length (l3):2.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:94 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:16.5

Load data in caliber .30 Super Fl. H&H with .311 | 180gr | Sellier & Bellot SPRN bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon Retumbo, ReloadSwiss RS 76 and Winchester StaBALL HD.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>88%41,191 psi89%2687 fps98.8%
ADI AR 2209<<locked>>84%40,509 psi87%2710 fps96.2%
ADI AR 2225ᴾ<<locked>>100%40,030 psi86%2785 fps98.2%
Alliant Reloder-19<<locked>>84%40,466 psi87%2703 fps96.3%
Alliant Reloder-22<<locked>>88%40,944 psi88%2759 fps96.6%
Alliant Reloder-23<<locked>>90%41,916 psi90%2766 fps100%
Alliant Reloder-25<<locked>>94%41,510 psi89%2802 fps99.5%
Alliant Reloder-26<<locked>>86%40,538 psi87%2815 fps99.7%
Bofors RP15<<locked>>90%40,582 psi87%2749 fps96.3%
Bofors RP5<<locked>>88%40,944 psi88%2759 fps96.6%
Hodgdon Hybrid 100V<<locked>>82%41,046 psi88%2674 fps100%
Hodgdon Retumbo<<locked>>94%40,582 psi87%2838 fps97.2%
Hodgdon TrailBossᴾ<<locked>>100%36,825 psi79%1827 fps100%
Lovex S071<<locked>>92%39,856 psi86%2661 fps98.5%
Norma MRP<<locked>>86%40,292 psi87%2776 fps97.8%
Ramshot Magnum<<locked>>92%40,176 psi87%2733 fps97.2%
ReloadSwiss RS 14ᴾ<<locked>>100%37,550 psi81%1870 fps100%
ReloadSwiss RS 76<<locked>>94%40,103 psi86%2825 fps98.2%
Rottweil R 905<<locked>>84%39,697 psi86%2687 fps96.2%
SNPE Vectan Tubal 8000<<locked>>84%39,334 psi85%2684 fps96.1%
Somchem S365<<locked>>82%41,176 psi89%2723 fps100%
Somchem S385<<locked>>84%40,263 psi87%2671 fps97.2%
Vihtavuori N165<<locked>>88%39,784 psi86%2654 fps96.7%
Vihtavuori N555<<locked>>86%41,162 psi89%2736 fps99.9%
Winchester StaBALL HD<<locked>>92%40,509 psi87%2874 fps100%
Winchester Supreme 780<<locked>>86%39,436 psi85%2651 fps95.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>80%31,415 psi68%2464 fps95.9%
ADI AR 2209<<locked>>82%37,927 psi82%2648 fps95.3%
ADI AR 2225<<locked>>94%33,098 psi71%2598 fps95.2%
Alliant Reloder-19<<locked>>82%37,913 psi82%2648 fps95.4%
Alliant Reloder-22<<locked>>86%38,319 psi83%2700 fps95.7%
Alliant Reloder-23<<locked>>80%30,168 psi65%2493 fps98.8%
Alliant Reloder-25<<locked>>84%30,066 psi65%2507 fps95.8%
Alliant Reloder-26<<locked>>80%32,590 psi70%2618 fps97.8%
Bofors RP15<<locked>>88%38,000 psi82%2690 fps95.4%
Bofors RP5<<locked>>86%38,319 psi83%2700 fps95.7%
Hodgdon Hybrid 100V<<locked>>80%38,348 psi83%2618 fps99.9%
Hodgdon Retumbo72.3 gr90%35,679 psi77%2707 fps95%
Hodgdon TrailBoss<<locked>>80%27,514 psi59%1634 fps100%
Lovex S071<<locked>>84%30,748 psi66%2444 fps95.6%
Norma MRP<<locked>>80%32,706 psi70%2589 fps95%
Ramshot Magnum<<locked>>88%34,925 psi75%2612 fps95.2%
ReloadSwiss RS 14<<locked>>80%28,079 psi61%1673 fps100%
ReloadSwiss RS 7677.3 gr90%34,780 psi75%2680 fps96%
Rottweil R 905<<locked>>82%37,115 psi80%2628 fps95.3%
SNPE Vectan Tubal 8000<<locked>>82%36,782 psi79%2625 fps95.2%
Somchem S365<<locked>>80%38,421 psi83%2671 fps100%
Somchem S385<<locked>>80%35,331 psi76%2556 fps95.6%
Vihtavuori N165<<locked>>84%34,824 psi75%2539 fps95%
Vihtavuori N555<<locked>>80%33,692 psi73%2569 fps98.8%
Winchester StaBALL HD66 gr80%26,745 psi58%2490 fps98.6%
Winchester Supreme 780<<locked>>84%36,840 psi79%2592 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .30 Super Fl. H&H loaded with the .311 | 180gr | Sellier & Bellot SPRN. Winchester StaBALL HD delivers the highest muzzle velocity at 2,874 fps; across all powders the maximum-charge window runs from 1,827 fps to 2,874 fps. ADI AR 2225 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 79–90 %, leaving at least 10 % headroom. The 180.0 gr projectile in 0.311" calls for a 1:16.5 twist; slower twists will usually not stabilise this weight. ADI AR 2225, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon Retumbo, ReloadSwiss RS 76, Winchester StaBALL HD rank at the top here: for .30 Super Fl. H&H with the .311 | 180gr | Sellier & Bellot SPRN they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data