Load data for .30 Super Fl. H&H + .308 | 180gr | Swift A-Frame

.30 Super Fl. H&H cartridge drawing
Swift logo

Load Specifications

Bullet Manufacturer:Swift
Bullet Weight:180 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:94 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:14.0

Load data in caliber .30 Super Fl. H&H with .308 | 180gr | Swift A-Frame bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Winchester StaBALL HD, Hodgdon Retumbo and ReloadSwiss RS 76.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>88%39,726 psi86%2654 fps98.4%
ADI AR 2225ᴾ<<locked>>100%38,754 psi84%2746 fps97.6%
Alliant Reloder-19<<locked>>86%41,916 psi90%2730 fps96.5%
Alliant Reloder-22<<locked>>88%39,697 psi86%2726 fps96%
Alliant Reloder-23<<locked>>90%40,538 psi87%2736 fps100%
Alliant Reloder-25<<locked>>94%40,103 psi86%2766 fps99.2%
Alliant Reloder-26<<locked>>88%41,945 psi90%2838 fps99.7%
Bofors RP15<<locked>>92%41,785 psi90%2769 fps96.5%
Bofors RP5<<locked>>88%39,697 psi86%2726 fps96%
Hodgdon Hybrid 100V<<locked>>82%39,711 psi86%2641 fps100%
Hodgdon Retumbo<<locked>>96%41,727 psi90%2854 fps97.4%
Hodgdon TrailBossᴾ<<locked>>100%36,811 psi79%1814 fps100%
IMR 4831<<locked>>82%41,814 psi90%2694 fps99.7%
Lovex S071<<locked>>94%40,988 psi88%2677 fps98.6%
Norma MRP<<locked>>88%41,669 psi90%2802 fps98%
Ramshot Hunter<<locked>>82%41,989 psi90%2730 fps98.7%
Ramshot Magnum<<locked>>94%41,713 psi90%2759 fps97.4%
ReloadSwiss RS 14ᴾ<<locked>>100%37,550 psi81%1857 fps100%
ReloadSwiss RS 76<<locked>>96%41,466 psi89%2848 fps98.4%
Rottweil R 905<<locked>>86%41,104 psi89%2713 fps96.5%
SNPE Vectan Tubal 8000<<locked>>86%40,741 psi88%2710 fps96.3%
Somchem S365<<locked>>82%39,784 psi86%2697 fps100%
Somchem S385<<locked>>86%41,713 psi90%2694 fps97.4%
Vihtavuori N165<<locked>>90%41,147 psi89%2674 fps96.9%
Vihtavuori N555<<locked>>86%39,856 psi86%2707 fps99.7%
Winchester StaBALL HD<<locked>>94%41,684 psi90%2897 fps100%
Winchester Supreme 780<<locked>>88%41,031 psi88%2677 fps96.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>80%30,298 psi65%2428 fps95.2%
ADI AR 2225<<locked>>96%34,026 psi73%2618 fps95.5%
Alliant Reloder-19<<locked>>84%39,204 psi84%2671 fps95.6%
Alliant Reloder-22<<locked>>86%37,086 psi80%2664 fps95.1%
Alliant Reloder-23<<locked>>80%29,269 psi63%2464 fps98.4%
Alliant Reloder-25<<locked>>84%29,196 psi63%2474 fps95.1%
Alliant Reloder-26<<locked>>80%31,444 psi68%2582 fps97.2%
Bofors RP15<<locked>>90%39,175 psi84%2713 fps95.7%
Bofors RP5<<locked>>86%37,086 psi80%2664 fps95.1%
Hodgdon Hybrid 100V<<locked>>80%37,173 psi80%2589 fps99.8%
Hodgdon Retumbo71.8 gr92%36,738 psi79%2730 fps95.3%
Hodgdon TrailBoss<<locked>>80%27,427 psi59%1621 fps100%
IMR 4831<<locked>>80%39,204 psi84%2641 fps99.4%
Lovex S071<<locked>>84%29,762 psi64%2415 fps95%
Norma MRP<<locked>>82%33,765 psi73%2612 fps95.3%
Ramshot Hunter<<locked>>80%39,247 psi85%2674 fps98.1%
Ramshot Magnum<<locked>>90%36,085 psi78%2631 fps95.5%
ReloadSwiss RS 14<<locked>>80%27,978 psi60%1660 fps100%
ReloadSwiss RS 7675.2 gr90%33,649 psi73%2641 fps95.1%
Rottweil R 905<<locked>>84%38,392 psi83%2654 fps95.6%
SNPE Vectan Tubal 8000<<locked>>84%38,029 psi82%2648 fps95.4%
Somchem S365<<locked>>80%37,159 psi80%2641 fps100%
Somchem S385<<locked>>80%34,214 psi74%2523 fps95%
Vihtavuori N165<<locked>>86%36,042 psi78%2562 fps95.3%
Vihtavuori N555<<locked>>80%32,561 psi70%2539 fps98.4%
Winchester StaBALL HD64.1 gr80%25,817 psi56%2451 fps98%
Winchester Supreme 780<<locked>>86%38,247 psi82%2618 fps95.3%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .30 Super Fl. H&H loaded with the .308 | 180gr | Swift A-Frame. Winchester StaBALL HD delivers the highest muzzle velocity at 2,897 fps; across all powders the maximum-charge window runs from 1,814 fps to 2,897 fps. ADI AR 2225 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 79–90 %, leaving at least 10 % headroom. The 180.0 gr projectile in 0.308" calls for a 1:14.0 twist; slower twists will usually not stabilise this weight. ADI AR 2225, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Winchester StaBALL HD, Hodgdon Retumbo, ReloadSwiss RS 76 rank at the top here: for .30 Super Fl. H&H with the .308 | 180gr | Swift A-Frame they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data