Load data for .30 Super Fl. H&H + .308 | 180gr | Sellier & Bellot SPCE

.30 Super Fl. H&H cartridge drawing
Sellier & Bellot logo

Load Specifications

Bullet Manufacturer:Sellier & Bellot
Bullet Weight:180 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.94"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:94 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:14.0

Load data in caliber .30 Super Fl. H&H with .308 | 180gr | Sellier & Bellot SPCE bullet and 25 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Winchester StaBALL HD, Hodgdon Retumbo and ReloadSwiss RS 76.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>88%39,842 psi86%2657 fps98.4%
ADI AR 2225ᴾ<<locked>>100%38,798 psi84%2746 fps97.6%
Alliant Reloder-22<<locked>>88%39,856 psi86%2730 fps96.1%
Alliant Reloder-23<<locked>>90%40,683 psi88%2740 fps100%
Alliant Reloder-25<<locked>>94%40,219 psi87%2769 fps99.2%
Alliant Reloder-26<<locked>>86%39,204 psi84%2782 fps99.4%
Bofors RP30<<locked>>98%41,771 psi90%2805 fps95.9%
Bofors RP5<<locked>>88%39,856 psi86%2730 fps96.1%
Hodgdon Hybrid 100V<<locked>>82%39,871 psi86%2644 fps100%
Hodgdon Retumbo<<locked>>94%39,320 psi85%2799 fps96.5%
Hodgdon TrailBossᴾ<<locked>>100%36,666 psi79%1814 fps100%
IMR 4831<<locked>>82%41,959 psi90%2700 fps99.7%
Lovex S071<<locked>>94%41,089 psi89%2684 fps98.7%
Norma MRP<<locked>>88%41,785 psi90%2802 fps98%
Ramshot Magnum<<locked>>94%41,974 psi90%2766 fps97.5%
ReloadSwiss RS 14ᴾ<<locked>>100%37,579 psi81%1860 fps100%
ReloadSwiss RS 76<<locked>>96%41,742 psi90%2854 fps98.5%
Rottweil R 905<<locked>>86%41,249 psi89%2717 fps96.5%
SNPE Vectan Tubal 8000<<locked>>86%40,915 psi88%2713 fps96.4%
Somchem S365<<locked>>82%39,929 psi86%2700 fps100%
Somchem S385<<locked>>86%41,814 psi90%2697 fps97.5%
Vihtavuori N165<<locked>>90%41,263 psi89%2677 fps97%
Vihtavuori N555<<locked>>86%40,001 psi86%2710 fps99.7%
Winchester StaBALL HD<<locked>>94%41,814 psi90%2900 fps100%
Winchester Supreme 780<<locked>>88%41,118 psi89%2680 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>80%30,414 psi66%2431 fps95.3%
ADI AR 2225<<locked>>96%34,229 psi74%2628 fps95.6%
Alliant Reloder-22<<locked>>86%37,231 psi80%2671 fps95.1%
Alliant Reloder-23<<locked>>80%29,370 psi63%2467 fps98.5%
Alliant Reloder-25<<locked>>84%29,298 psi63%2477 fps95.2%
Alliant Reloder-26<<locked>>80%31,546 psi68%2589 fps97.3%
Bofors RP30<<locked>>96%39,204 psi84%2746 fps95%
Bofors RP5<<locked>>86%37,231 psi80%2671 fps95.1%
Hodgdon Hybrid 100V<<locked>>80%37,333 psi80%2595 fps99.9%
Hodgdon Retumbo72 gr92%36,796 psi79%2730 fps95.4%
Hodgdon TrailBoss<<locked>>80%27,499 psi59%1624 fps100%
IMR 4831<<locked>>80%39,349 psi85%2644 fps99.4%
Lovex S071<<locked>>84%29,892 psi64%2418 fps95%
Norma MRP<<locked>>82%33,910 psi73%2615 fps95.4%
Ramshot Magnum<<locked>>90%36,332 psi78%2638 fps95.6%
ReloadSwiss RS 14<<locked>>80%28,050 psi60%1663 fps100%
ReloadSwiss RS 7675.4 gr90%33,750 psi73%2644 fps95.2%
Rottweil R 905<<locked>>84%38,508 psi83%2657 fps95.7%
SNPE Vectan Tubal 8000<<locked>>84%38,159 psi82%2651 fps95.5%
Somchem S365<<locked>>80%37,318 psi80%2648 fps100%
Somchem S385<<locked>>80%34,345 psi74%2530 fps95%
Vihtavuori N165<<locked>>86%36,172 psi78%2566 fps95.3%
Vihtavuori N555<<locked>>80%32,721 psi71%2543 fps98.4%
Winchester StaBALL HD64.3 gr80%25,918 psi56%2454 fps98%
Winchester Supreme 780<<locked>>86%38,392 psi83%2621 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 25 powders for .30 Super Fl. H&H loaded with the .308 | 180gr | Sellier & Bellot SPCE. Winchester StaBALL HD delivers the highest muzzle velocity at 2,900 fps; across all powders the maximum-charge window runs from 1,814 fps to 2,900 fps. ADI AR 2225 gives the best case fill at 100 %, and 25 of the 25 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 79–90 %, leaving at least 10 % headroom. The 180.0 gr projectile in 0.308" calls for a 1:14.0 twist; slower twists will usually not stabilise this weight. ADI AR 2225, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Winchester StaBALL HD, Hodgdon Retumbo, ReloadSwiss RS 76 rank at the top here: for .30 Super Fl. H&H with the .308 | 180gr | Sellier & Bellot SPCE they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data