Load data for .30 PICRA + .308 | 150gr | Sellier & Bellot SP

Recommended Powder(s): none

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:	.308 \| 150gr \| Sellier & Bellot SP
Manufacturer SKU:	2934
Bullet Weight:	150gr \| 9.7g
Bullet Diameter:	0.308" \| 7.82mm
Bullet Length:	0.912" \| 23.2mm
Caliber:	.30 PICRA load data
Case Length (l3):	1.291" \| 32.8mm
Cartridge Length (C.O.L.):	2.081" \| 52.9mm
Seated Depth:	0.122" \| 3.1mm
Shank Seated Depth:	0.122" \| 3.1mm
Case Capacity:	24.2 Grains of Water \| 1.57 cm³
Primer Size:	Small Pistol (SP)
Max. allowed Pressure:	40611 psi \| 2800 bar
LID:	LID_B7222_C311
Last updated:	2025-01-01

Load data for 42 loads in caliber .30 PICRA with .308 | 150gr | Sellier & Bellot SP bullet and 21 powders such as none. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service.

Questions regarding the load data: Please read the information in the next tab "Explanations".
A load must fulfill certain criteria to be listed in the default view below - see "powder criteria to fulfill to be listed".

Our load data might deviate from other sources - see the "most common reasons for deviations".

All loads are based on the bullet and case dimensions shown under "Load Specifications" - see "reloading suggestions" if you deviate.

You can set your specifications in the "Personalized Load Calculator".

Go to the bottom of the "Dashboard " page to set the measure system (imperial vs. metric)
No data yet
C.O.L. (Inch)
C.O.L. (mm)
We recommend you limit powder range to relevant brands to speed up re-calculation of results
Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads, >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.
Case Length (Inch)
Case Length (mm)
CaseCapacity (GoW)
Min z (%)
Min FR (%)
Max FR*
Barrel Length (Inch)
Barrel Length (cm)
Safety Buffer (%)
.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	72%	36216	89%	**89	100%
Accurate 4100	<<locked>>	72%	35897	88%	**58	91%
[Accurate No. 11 FS]*	<<locked>>	81%	35926	88%	**81	84%
Alliant 2400	<<locked>>	68%	34693	85%	**42	93%
Alliant BLUE DOT	<<locked>>	70%	35201	87%	**32	99%
[Hodgdon H110]*	<<locked>>	75%	35070	86%	**81	88%
Hodgdon LilGun	<<locked>>	77%	36201	89%	**17	94%
Hodgdon TrailBoss	<<locked>>	93%	24569	61%	**5	100%
Maxam CSB 1	<<locked>>	63%	35636	88%	**35	100%
Ramshot Enforcer	<<locked>>	69%	36143	89%	**68	95%
ReloadSwiss RS 14	<<locked>>	96%	24976	61%	**8	100%
ReloadSwiss RS 30	<<locked>>	92%	35273	87%	**14	91%
SNPE Vectan A0	<<locked>>	63%	35984	89%	**81	100%
SNPE Vectan BA6 1/2	<<locked>>	93%	35172	87%	**58	97%
SNPE Vectan BA7 1/2	<<locked>>	66%	35578	88%	**34	100%
[Somchem S265]*	<<locked>>	84%	36071	89%	**48	87%
Vihtavuori 3N38	<<locked>>	66%	34635	85%	**99	100%
Vihtavuori N105	<<locked>>	69%	34577	85%	**09	100%
Vihtavuori N110	<<locked>>	85%	35360	87%	**68	94%
Vihtavuori N32C Tin Star	<<locked>>	76%	34838	86%	**40	100%
[Winchester 296]*	<<locked>>	75%	35476	87%	**94	84%

Max Load - Barrel Length: 5.50''

Powder	Charge	FR	MaxP	%	V(0)	z
ADI AP 100	<<locked>>	61%	26890	66%	**45	100%
[Accurate 4100]*	<<locked>>	61%	25353	62%	**88	85%
[Accurate No. 11 FS]*	<<locked>>	76%	31241	77%	**06	81%
Alliant 2400	<<locked>>	61%	28384	70%	**34	90%
Alliant BLUE DOT	<<locked>>	61%	26716	66%	**91	96%
[Hodgdon H110]*	<<locked>>	65%	25338	62%	**94	81%
[Hodgdon LilGun]*	<<locked>>	61%	20305	50%	**32	83%
Hodgdon TrailBoss	<<locked>>	61%	13982	34%	**1	100%
Maxam CSB 1	<<locked>>	61%	33344	82%	**12	100%
Ramshot Enforcer	<<locked>>	61%	28007	69%	**43	91%
ReloadSwiss RS 14	<<locked>>	60%	13256	33%	**5	100%
[ReloadSwiss RS 30]*	<<locked>>	76%	22713	56%	**61	80%
SNPE Vectan A0	<<locked>>	61%	33779	83%	**55	100%
[SNPE Vectan BA6 1/2]*	<<locked>>	61%	14707	36%	**2	80%
SNPE Vectan BA7 1/2	<<locked>>	61%	31662	78%	**81	100%
[Somchem S265]*	<<locked>>	72%	26208	65%	**81	81%
Vihtavuori 3N38	<<locked>>	61%	29312	72%	**14	99%
Vihtavuori N105	<<locked>>	61%	26963	66%	**01	100%
[Vihtavuori N110]*	<<locked>>	61%	17376	43%	**24	80%
Vihtavuori N32C Tin Star	<<locked>>	61%	25222	62%	**5	100%
[Winchester 296]*	<<locked>>	71%	30835	76%	**12	81%

Start Load - Barrel Length: 5.50''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber

V(0) ... muzzle velocity in feet per second (fps) or meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍 ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data