Load data for .30 Fl. N.E. Purdey + .308 | 150gr | Swift Scirocco

.30 Fl. N.E. Purdey cartridge drawing
Swift logo

Load Specifications

Bullet Manufacturer:Swift
Bullet Weight:150 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.313"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:58 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:12.0

Load data in caliber .30 Fl. N.E. Purdey with .308 | 150gr | Swift Scirocco bullet and 45 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are IMR 3031, Winchester 748 and Accurate 2520.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>88%39,900 psi86%2526 fps99.8%
Accurate 2460<<locked>>86%40,611 psi88%2566 fps98.3%
Accurate 2495<<locked>>96%39,987 psi86%2602 fps99.9%
Accurate 2520<<locked>>90%40,872 psi88%2612 fps98%
Accurate 4064<<locked>>98%40,016 psi86%2625 fps98.9%
ADI AR 2219<<locked>>82%40,045 psi86%2575 fps99.1%
ADI Benchmark 8208<<locked>>90%41,655 psi90%2582 fps96.3%
Alliant AR-Comp<<locked>>92%41,901 psi90%2644 fps100%
Alliant Reloder- TS 15.5<<locked>>98%40,263 psi87%2612 fps95.7%
Alliant Reloder-10x<<locked>>84%40,451 psi87%2546 fps100%
Baschieri & Pellagri 106<<locked>>82%40,538 psi87%2480 fps99.4%
Hodgdon Benchmark<<locked>>88%41,989 psi90%2539 fps97%
Hodgdon BL-C2<<locked>>92%41,524 psi89%2644 fps97.1%
Hodgdon H322<<locked>>86%41,611 psi90%2605 fps99.3%
Hodgdon H335<<locked>>84%39,668 psi85%2572 fps98.3%
Hodgdon TrailBossᴾ<<locked>>100%32,851 psi71%1631 fps100%
IMR 3031<<locked>>92%39,682 psi86%2628 fps99.6%
IMR 4198<<locked>>84%41,829 psi90%2523 fps100%
IMR 8208 XBR<<locked>>90%41,655 psi90%2582 fps96.3%
Lovex D073.5<<locked>>86%40,364 psi87%2562 fps97.1%
Lovex D073.6<<locked>>94%41,568 psi90%2638 fps98.2%
Lovex S062<<locked>>96%40,828 psi88%2585 fps96.3%
Norma 201<<locked>>92%40,756 psi88%2566 fps96.2%
Norma 202<<locked>>92%40,466 psi87%2585 fps98.5%
ReloadSwiss RS 14ᴾ<<locked>>100%32,924 psi71%1670 fps100%
ReloadSwiss RS 40<<locked>>86%41,495 psi89%2579 fps97.7%
ReloadSwiss RS 60ᴾ<<locked>>100%41,365 psi89%2690 fps97.2%
Rottweil R 901<<locked>>88%39,755 psi86%2533 fps98.1%
Rottweil R 902<<locked>>94%40,756 psi88%2559 fps96.2%
Shooters World Match Rifle<<locked>>94%41,568 psi90%2638 fps98.2%
Shooters World Precision<<locked>>96%40,828 psi88%2585 fps96.3%
SNPE Vectan SP 10<<locked>>82%40,683 psi88%2582 fps98.4%
SNPE Vectan SP 3<<locked>>84%41,220 psi89%2556 fps99.7%
SNPE Vectan Tubal 3000<<locked>>90%40,886 psi88%2500 fps98.4%
SNPE Vectan Tubal 5000<<locked>>96%39,479 psi85%2493 fps99%
Somchem S321<<locked>>88%41,814 psi90%2612 fps96.8%
Somchem S335<<locked>>90%39,639 psi85%2500 fps98.9%
Vihtavuori N130<<locked>>86%41,118 psi89%2503 fps100%
Vihtavuori N133<<locked>>90%40,437 psi87%2507 fps99.8%
Vihtavuori N135<<locked>>96%41,147 psi89%2605 fps100%
Vihtavuori N140<<locked>>94%40,567 psi87%2566 fps98.8%
Vihtavuori N150ᴾ<<locked>>100%39,465 psi85%2556 fps96.4%
Vihtavuori N530<<locked>>90%41,655 psi90%2575 fps96.4%
Vihtavuori N540<<locked>>96%41,771 psi90%2605 fps98.6%
Winchester 748<<locked>>90%39,958 psi86%2612 fps96.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 2015<<locked>>80%30,995 psi67%2339 fps98.5%
Accurate 2460<<locked>>80%33,170 psi71%2411 fps96.3%
Accurate 2495<<locked>>80%23,641 psi51%2218 fps96.3%
Accurate 252036.8 gr82%30,995 psi67%2402 fps95.1%
Accurate 4064<<locked>>86%27,238 psi59%2333 fps95%
ADI AR 2219<<locked>>80%37,376 psi81%2520 fps98.6%
ADI Benchmark 8208<<locked>>88%39,001 psi84%2530 fps95.6%
Alliant AR-Comp<<locked>>80%28,442 psi61%2359 fps99.6%
Alliant Reloder- TS 15.5<<locked>>96%37,956 psi82%2566 fps95%
Alliant Reloder-10x<<locked>>80%35,766 psi77%2454 fps99.8%
Baschieri & Pellagri 106<<locked>>80%38,072 psi82%2431 fps99%
Hodgdon Benchmark<<locked>>84%37,173 psi80%2444 fps95.7%
Hodgdon BL-C2<<locked>>88%36,303 psi78%2539 fps95.6%
Hodgdon H322<<locked>>80%34,360 psi74%2454 fps97.9%
Hodgdon H335<<locked>>80%34,737 psi75%2467 fps97.1%
Hodgdon TrailBoss<<locked>>80%24,424 psi53%1460 fps100%
IMR 303132.9 gr80%27,296 psi59%2333 fps96.3%
IMR 4198<<locked>>80%37,275 psi80%2441 fps100%
IMR 8208 XBR<<locked>>88%39,001 psi84%2530 fps95.6%
Lovex D073.5<<locked>>82%35,259 psi76%2457 fps95.6%
Lovex D073.6<<locked>>86%31,662 psi68%2431 fps95.3%
Lovex S062<<locked>>94%38,450 psi83%2539 fps95.6%
Norma 201<<locked>>90%38,087 psi82%2513 fps95.5%
Norma 202<<locked>>82%29,443 psi63%2343 fps95.2%
ReloadSwiss RS 14<<locked>>80%24,352 psi52%1496 fps100%
ReloadSwiss RS 40<<locked>>80%34,200 psi74%2428 fps95.7%
ReloadSwiss RS 60<<locked>>96%36,347 psi78%2572 fps95.3%
Rottweil R 901<<locked>>80%31,212 psi67%2343 fps95.6%
Rottweil R 902<<locked>>92%38,392 psi83%2513 fps95.5%
Shooters World Match Rifle<<locked>>86%31,662 psi68%2431 fps95.3%
Shooters World Precision<<locked>>94%38,450 psi83%2539 fps95.6%
SNPE Vectan SP 10<<locked>>80%38,116 psi82%2530 fps97.9%
SNPE Vectan SP 3<<locked>>80%36,332 psi78%2461 fps99%
SNPE Vectan Tubal 3000<<locked>>80%30,095 psi65%2270 fps95.3%
SNPE Vectan Tubal 5000<<locked>>84%27,485 psi59%2224 fps95.5%
Somchem S321<<locked>>84%36,376 psi78%2500 fps95.2%
Somchem S335<<locked>>80%29,356 psi63%2274 fps96.1%
Vihtavuori N130<<locked>>80%34,287 psi74%2372 fps99.6%
Vihtavuori N133<<locked>>80%29,834 psi64%2283 fps98%
Vihtavuori N135<<locked>>80%24,947 psi54%2234 fps96.5%
Vihtavuori N140<<locked>>84%29,704 psi64%2329 fps95.7%
Vihtavuori N150<<locked>>98%36,869 psi79%2503 fps95.6%
Vihtavuori N530<<locked>>88%38,899 psi84%2523 fps95.6%
Vihtavuori N540<<locked>>86%30,487 psi66%2365 fps95.4%
Winchester 74838.3 gr86%35,085 psi76%2503 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 45 powders for .30 Fl. N.E. Purdey loaded with the .308 | 150gr | Swift Scirocco. ReloadSwiss RS 60 delivers the highest muzzle velocity at 2,690 fps; across all powders the maximum-charge window runs from 1,631 fps to 2,690 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 45 of the 45 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 71–90 %, leaving at least 10 % headroom. The 150.0 gr projectile in 0.308" calls for a 1:12.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14, ReloadSwiss RS 60 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. IMR 3031, Winchester 748, Accurate 2520 rank at the top here: for .30 Fl. N.E. Purdey with the .308 | 150gr | Swift Scirocco they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data