Load data for .30-30 Win. + .308 | 88gr | Inceptor SRR

.30-30 Win. cartridge drawing
Inceptor logo

Load Specifications

Bullet Manufacturer:Inceptor
Bullet Weight:88 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.039"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:45 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:11.5

Load data in caliber .30-30 Win. with .308 | 88gr | Inceptor SRR bullet and 11 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Lovex S053, Vihtavuori N110 and SNPE Vectan BA6 1/2.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate No. 11 FS<<locked>>84%40,161 psi87%2776 fps97.6%
ADI AR 2205<<locked>>86%40,248 psi87%2703 fps99%
ADI AR 2207ᴾ<<locked>>100%36,434 psi79%2812 fps96.6%
Hodgdon TrailBossᴾ<<locked>>100%26,266 psi57%1814 fps100%
IMR 4227<<locked>>94%40,524 psi87%2785 fps96.1%
Lovex S053<<locked>>96%40,451 psi87%2808 fps99.1%
ReloadSwiss RS 14ᴾ<<locked>>100%25,367 psi55%1854 fps100%
ReloadSwiss RS 36<<locked>>96%41,249 psi89%2841 fps96.2%
SNPE Vectan BA6 1/2ᴾ<<locked>>100%41,495 psi89%2713 fps100%
Vihtavuori N110<<locked>>90%40,161 psi87%2772 fps100%
Vihtavuori N120ᴾ<<locked>>100%36,941 psi80%2785 fps97.9%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate No. 11 FS<<locked>>80%34,925 psi75%2671 fps96.1%
ADI AR 2205<<locked>>80%33,301 psi72%2559 fps97.5%
ADI AR 2207<<locked>>96%32,039 psi69%2710 fps95.1%
Hodgdon TrailBoss<<locked>>80%18,884 psi41%1627 fps100%
IMR 4227<<locked>>92%37,971 psi82%2736 fps95.3%
Lovex S05323.4 gr84%28,065 psi60%2526 fps95.7%
ReloadSwiss RS 14<<locked>>80%18,362 psi40%1667 fps100%
ReloadSwiss RS 36<<locked>>94%38,725 psi83%2792 fps95.5%
SNPE Vectan BA6 1/220.4 gr80%23,699 psi51%2339 fps99.6%
Vihtavuori N11021.3 gr80%29,370 psi63%2552 fps99.7%
Vihtavuori N120<<locked>>92%29,022 psi63%2595 fps95.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 20 powders for .30-30 Win. loaded with the .308 | 88gr | Inceptor SRR. ReloadSwiss RS 36 delivers the highest muzzle velocity at 2,841 fps; across all powders the maximum-charge window runs from 1,814 fps to 2,841 fps. ADI AR 2207 gives the best case fill at 100 %, and 20 of the 20 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. The 88.0 gr projectile in 0.308" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. ADI AR 2207, Alliant Reloder-7, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Lovex S053, Vihtavuori N110, SNPE Vectan BA6 1/2 rank at the top here: for .30-30 Win. with the .308 | 88gr | Inceptor SRR they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 1680, Alliant Reloder-7, IMR 4198 burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data