Load data for .30-30 Win. + .308 | 100gr | CutEdge ESP Raptor

.30-30 Win. cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:100 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.039"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:45 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:46,412 psi

Load data in caliber .30-30 Win. with .308 | 100gr | CutEdge ESP Raptor bullet and 29 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2207, Norma 200 and ReloadSwiss RS 36.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>90%41,568 psi90%2710 fps96.5%
Accurate 1680<<locked>>88%39,552 psi85%2684 fps96.1%
ADI AR 2207<<locked>>96%41,829 psi90%2831 fps99.6%
ADI AR 2207<<locked>>94%39,929 psi86%2805 fps99.5%
Alliant Reloder-10xᴾ<<locked>>100%38,696 psi83%2779 fps96%
Alliant Reloder-10xᴾ<<locked>>100%39,421 psi85%2802 fps96.4%
Alliant Reloder-7<<locked>>94%41,756 psi90%2772 fps97.2%
Alliant Reloder-7<<locked>>92%39,856 psi86%2746 fps96.9%
Hodgdon TrailBossᴾ<<locked>>100%28,631 psi62%1791 fps100%
Hodgdon TrailBossᴾ<<locked>>100%28,500 psi61%1795 fps100%
IMR 4198<<locked>>98%40,103 psi86%2746 fps97.1%
IMR 4198<<locked>>98%40,799 psi88%2769 fps97.4%
IMR 4227<<locked>>88%41,466 psi89%2730 fps98.7%
IMR 4227<<locked>>86%39,595 psi85%2703 fps98.4%
Lovex S053<<locked>>88%40,074 psi86%2707 fps100%
Lovex S053<<locked>>88%40,538 psi87%2723 fps100%
Norma 200<<locked>>98%41,031 psi88%2815 fps97.5%
Norma 200<<locked>>98%41,858 psi90%2838 fps97.8%
ReloadSwiss RS 14ᴾ<<locked>>100%27,876 psi60%1827 fps100%
ReloadSwiss RS 14ᴾ<<locked>>100%28,079 psi61%1841 fps100%
ReloadSwiss RS 36<<locked>>88%40,292 psi87%2746 fps98.4%
ReloadSwiss RS 36<<locked>>88%41,089 psi89%2769 fps98.7%
SNPE Vectan BA6 1/2<<locked>>92%41,539 psi90%2605 fps100%
SNPE Vectan BA6 1/2<<locked>>90%39,813 psi86%2582 fps100%
Vihtavuori N110<<locked>>84%41,756 psi90%2684 fps100%
Vihtavuori N110<<locked>>82%39,972 psi86%2661 fps100%
Vihtavuori N120<<locked>>94%39,334 psi85%2746 fps99.8%
Vihtavuori N120<<locked>>94%40,190 psi87%2769 fps99.9%
Vihtavuori N130ᴾ<<locked>>100%38,754 psi84%2713 fps95.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>88%38,914 psi84%2661 fps95.7%
Accurate 1680<<locked>>86%36,724 psi79%2628 fps95.2%
ADI AR 220727.4 gr82%26,614 psi57%2487 fps95.7%
ADI AR 220726.7 gr80%25,251 psi54%2451 fps95.1%
Alliant Reloder-10x<<locked>>98%36,100 psi78%2726 fps95.2%
Alliant Reloder-10x<<locked>>98%36,840 psi79%2749 fps95.7%
Alliant Reloder-7<<locked>>88%34,243 psi74%2618 fps95%
Alliant Reloder-7<<locked>>88%34,969 psi75%2644 fps95.5%
Hodgdon TrailBoss<<locked>>80%20,653 psi45%1604 fps100%
Hodgdon TrailBoss<<locked>>80%20,624 psi44%1608 fps100%
IMR 4198<<locked>>94%35,578 psi77%2648 fps95.7%
IMR 4198<<locked>>92%34,345 psi74%2631 fps95.4%
IMR 4227<<locked>>80%32,474 psi70%2539 fps96.4%
IMR 4227<<locked>>80%32,663 psi70%2552 fps96.6%
Lovex S053<<locked>>80%31,169 psi67%2520 fps98.9%
Lovex S053<<locked>>80%31,705 psi68%2539 fps99.1%
Norma 20032.1 gr92%33,808 psi73%2664 fps95.4%
Norma 20032.1 gr92%34,229 psi74%2684 fps95.7%
ReloadSwiss RS 14<<locked>>80%20,189 psi44%1640 fps100%
ReloadSwiss RS 14<<locked>>80%20,160 psi43%1644 fps100%
ReloadSwiss RS 3627.8 gr80%31,125 psi67%2546 fps95.8%
ReloadSwiss RS 3627.8 gr80%31,604 psi68%2566 fps96.1%
SNPE Vectan BA6 1/2<<locked>>80%29,559 psi64%2385 fps100%
SNPE Vectan BA6 1/2<<locked>>80%29,834 psi64%2398 fps100%
Vihtavuori N110<<locked>>80%36,941 psi80%2602 fps100%
Vihtavuori N110<<locked>>80%37,594 psi81%2621 fps100%
Vihtavuori N120<<locked>>80%25,251 psi54%2411 fps96.3%
Vihtavuori N120<<locked>>80%25,657 psi55%2434 fps96.7%
Vihtavuori N130<<locked>>98%36,289 psi78%2661 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 29 powders for .30-30 Win. loaded with the .308 | 100gr | CutEdge ESP Raptor. Norma 200 delivers the highest muzzle velocity at 2,838 fps; across all powders the maximum-charge window runs from 1,791 fps to 2,838 fps. Alliant Reloder-10x gives the best case fill at 100 %, and 29 of the 29 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 60–90 %, leaving at least 10 % headroom. Alliant Reloder-10x, Alliant Reloder-10x, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2207, Norma 200, ReloadSwiss RS 36 rank at the top here: for .30-30 Win. with the .308 | 100gr | CutEdge ESP Raptor they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data