Load data for .30-30 Ackley Improved + .311 | 90gr | Inceptor SRR

.30-30 Ackley Improved cartridge drawing
Inceptor logo

Load Specifications

Bullet Manufacturer:Inceptor
Bullet Weight:90 gr
Bullet Diameter:0.311"
Bullet Length:<<locked>>
Case Length (l3):2.03"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:48.6 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:12.0

Load data in caliber .30-30 Ackley Improved with .311 | 90gr | Inceptor SRR bullet and 13 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2207, Lovex S053 and ReloadSwiss RS 36.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
ADI AR 2205<<locked>>84%41,423 psi89%2756 fps99.7%
ADI AR 2207ᴾ<<locked>>100%41,887 psi90%2949 fps98.9%
Hodgdon TrailBossᴾ<<locked>>100%27,485 psi59%1860 fps100%
IMR 4227<<locked>>90%40,132 psi86%2812 fps97.3%
Lovex D060<<locked>>84%41,887 psi90%2867 fps95.9%
Lovex S053<<locked>>92%40,393 psi87%2831 fps99.6%
ReloadSwiss RS 14ᴾ<<locked>>100%26,629 psi57%1900 fps100%
ReloadSwiss RS 36<<locked>>92%40,988 psi88%2871 fps97.4%
Shooters World Buffalo Rifle<<locked>>84%41,887 psi90%2867 fps95.9%
Shooters World SOCOM<<locked>>84%41,510 psi89%2818 fps96.7%
SNPE Vectan BA6 1/2<<locked>>94%39,682 psi86%2700 fps100%
Vihtavuori N110<<locked>>86%40,074 psi86%2785 fps100%
Vihtavuori N120<<locked>>98%39,856 psi86%2871 fps99.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
ADI AR 2205<<locked>>80%36,550 psi79%2661 fps99.1%
ADI AR 220728.3 gr88%28,718 psi62%2651 fps95.1%
Hodgdon TrailBoss<<locked>>80%19,856 psi43%1670 fps100%
IMR 4227<<locked>>84%33,185 psi72%2661 fps95.1%
Lovex D060<<locked>>82%39,204 psi84%2808 fps95.1%
Lovex S05324.6 gr80%28,036 psi60%2549 fps96.9%
ReloadSwiss RS 14<<locked>>80%19,058 psi41%1699 fps100%
ReloadSwiss RS 3628.7 gr86%33,765 psi73%2717 fps95.3%
Shooters World Buffalo Rifle<<locked>>82%39,204 psi84%2808 fps95.1%
Shooters World SOCOM<<locked>>80%36,289 psi78%2710 fps95.1%
SNPE Vectan BA6 1/2<<locked>>80%26,861 psi58%2438 fps100%
Vihtavuori N110<<locked>>80%33,127 psi71%2654 fps100%
Vihtavuori N120<<locked>>86%27,267 psi59%2575 fps95.8%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 13 powders for .30-30 Ackley Improved loaded with the .311 | 90gr | Inceptor SRR. ADI AR 2207 delivers the highest muzzle velocity at 2,949 fps; across all powders the maximum-charge window runs from 1,860 fps to 2,949 fps. ADI AR 2207 gives the best case fill at 100 %, and 13 of the 13 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 57–90 %, leaving at least 10 % headroom. The 90.0 gr projectile in 0.311" calls for a 1:12.0 twist; slower twists will usually not stabilise this weight. ADI AR 2207, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2207, Lovex S053, ReloadSwiss RS 36 rank at the top here: for .30-30 Ackley Improved with the .311 | 90gr | Inceptor SRR they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data