Load data for .30-30 Ackley Improved + .311 | 130gr | CutEdge ESP Raptor

.30-30 Ackley Improved cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:130 gr
Bullet Diameter:0.311"
Bullet Length:<<locked>>
Case Length (l3):2.03"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:48.6 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:15.0

Load data in caliber .30-30 Ackley Improved with .311 | 130gr | CutEdge ESP Raptor bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, Norma 200 and ADI AR 2207.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%41,394 psi89%2434 fps99%
Accurate 2015<<locked>>98%39,334 psi85%2480 fps98%
Accurate 2495ᴾ<<locked>>100%30,139 psi65%2379 fps95.9%
Accurate LT-30<<locked>>88%39,914 psi86%2395 fps96.4%
ADI AR 2207<<locked>>88%40,654 psi88%2500 fps100%
ADI AR 2219<<locked>>92%41,916 psi90%2549 fps96.8%
Alliant AR-Compᴾ<<locked>>100%39,175 psi84%2552 fps99.7%
Alliant Reloder-10x<<locked>>94%40,756 psi88%2530 fps99.1%
Alliant Reloder-7<<locked>>86%39,885 psi86%2451 fps99.2%
Baschieri & Pellagri 106<<locked>>90%40,248 psi87%2421 fps96.9%
Hodgdon H322<<locked>>94%40,364 psi87%2523 fps96.4%
Hodgdon H4198<<locked>>86%41,452 psi89%2438 fps96.1%
Hodgdon TrailBossᴾ<<locked>>100%30,545 psi66%1594 fps100%
IMR 3031ᴾ<<locked>>100%37,391 psi81%2520 fps96.5%
IMR 4198<<locked>>92%40,959 psi88%2480 fps99.5%
IMR 4227<<locked>>82%41,423 psi89%2431 fps100%
Lovex S053<<locked>>82%40,393 psi87%2402 fps100%
Norma 200<<locked>>90%40,306 psi87%2507 fps99.5%
ReloadSwiss RS 14ᴾ<<locked>>100%30,023 psi65%1631 fps100%
ReloadSwiss RS 36<<locked>>82%40,756 psi88%2457 fps99.9%
SNPE Vectan BA6 1/2<<locked>>84%39,813 psi86%2264 fps100%
SNPE Vectan SP 3<<locked>>94%41,756 psi90%2523 fps97.7%
Somchem S335ᴾ<<locked>>100%40,059 psi86%2457 fps96.2%
Vihtavuori N120<<locked>>88%40,930 psi88%2461 fps100%
Vihtavuori N130<<locked>>96%41,843 psi90%2484 fps99%
Vihtavuori N133ᴾ<<locked>>100%40,901 psi88%2467 fps98%
Vihtavuori N135ᴾ<<locked>>100%33,127 psi71%2405 fps96.4%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%36,042 psi78%2339 fps98%
Accurate 2015<<locked>>90%30,298 psi65%2303 fps95.2%
Accurate 2495<<locked>>98%27,992 psi60%2329 fps95%
Accurate LT-30<<locked>>86%37,420 psi81%2352 fps95.7%
ADI AR 220726.4 gr80%31,502 psi68%2329 fps99.6%
ADI AR 2219<<locked>>88%36,477 psi79%2448 fps95.1%
Alliant AR-Comp<<locked>>86%25,063 psi54%2215 fps95.1%
Alliant Reloder-10x27.3 gr82%27,673 psi60%2254 fps95.4%
Alliant Reloder-7<<locked>>80%33,054 psi71%2320 fps97.8%
Baschieri & Pellagri 106<<locked>>86%35,302 psi76%2329 fps95.5%
Hodgdon H322<<locked>>92%37,811 psi81%2474 fps95.6%
Hodgdon H4198<<locked>>84%38,856 psi84%2392 fps95.4%
Hodgdon TrailBoss<<locked>>80%22,205 psi48%1427 fps100%
IMR 3031<<locked>>98%34,998 psi75%2470 fps95.6%
IMR 4198<<locked>>80%28,689 psi62%2224 fps96.6%
IMR 4227<<locked>>80%39,059 psi84%2392 fps99.8%
Lovex S053<<locked>>80%38,145 psi82%2365 fps100%
Norma 20027.6 gr80%29,153 psi63%2280 fps96.9%
ReloadSwiss RS 14<<locked>>80%21,915 psi47%1460 fps100%
ReloadSwiss RS 36<<locked>>80%38,130 psi82%2411 fps99.7%
SNPE Vectan BA6 1/2<<locked>>80%35,476 psi76%2195 fps100%
SNPE Vectan SP 3<<locked>>88%34,592 psi75%2385 fps95.6%
Somchem S335<<locked>>98%37,594 psi81%2411 fps95.5%
Vihtavuori N120<<locked>>80%31,763 psi68%2300 fps100%
Vihtavuori N130<<locked>>84%28,732 psi62%2224 fps95.5%
Vihtavuori N133<<locked>>92%32,184 psi69%2300 fps95.5%
Vihtavuori N135<<locked>>98%31,299 psi67%2362 fps95.7%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .30-30 Ackley Improved loaded with the .311 | 130gr | CutEdge ESP Raptor. Alliant AR-Comp delivers the highest muzzle velocity at 2,552 fps; across all powders the maximum-charge window runs from 1,594 fps to 2,552 fps. Accurate 2495 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 65–90 %, leaving at least 10 % headroom. The 130.0 gr projectile in 0.311" calls for a 1:15.0 twist; slower twists will usually not stabilise this weight. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, Norma 200, ADI AR 2207 rank at the top here: for .30-30 Ackley Improved with the .311 | 130gr | CutEdge ESP Raptor they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data