Load data for .30-30 Ackley Improved + .308 | 130gr | Atomic 29 HP

.30-30 Ackley Improved cartridge drawing
Atomic 29 logo

Load Specifications

Bullet Manufacturer:Atomic 29
Bullet Weight:130 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.03"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:48.6 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:14.0

Load data in caliber .30-30 Ackley Improved with .308 | 130gr | Atomic 29 HP bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, SNPE Vectan SP 3 and Norma 200.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%40,190 psi87%2405 fps98.7%
Accurate 2015ᴾ<<locked>>100%40,901 psi88%2497 fps98.1%
Accurate 2495ᴾ<<locked>>100%34,577 psi75%2474 fps96.9%
Accurate LT-30<<locked>>90%41,394 psi89%2408 fps96.6%
ADI AR 2207<<locked>>88%40,799 psi88%2484 fps100%
ADI AR 2219<<locked>>92%41,945 psi90%2533 fps96.5%
Alliant AR-Compᴾ<<locked>>100%39,305 psi85%2536 fps99.6%
Alliant Reloder-10x<<locked>>94%40,727 psi88%2510 fps98.9%
Alliant Reloder-7<<locked>>86%40,190 psi87%2438 fps99.1%
Baschieri & Pellagri 106<<locked>>90%40,321 psi87%2402 fps96.7%
Hodgdon H322<<locked>>98%41,945 psi90%2533 fps96.5%
Hodgdon H4198<<locked>>88%41,133 psi89%2411 fps95.8%
Hodgdon TrailBossᴾ<<locked>>100%30,777 psi66%1585 fps100%
IMR 4198<<locked>>92%41,002 psi88%2464 fps99.4%
IMR 4227<<locked>>82%41,626 psi90%2418 fps99.9%
Lovex S053<<locked>>82%40,683 psi88%2388 fps100%
Norma 200<<locked>>90%40,857 psi88%2497 fps99.4%
ReloadSwiss RS 14ᴾ<<locked>>100%30,342 psi65%1617 fps100%
ReloadSwiss RS 36<<locked>>82%40,756 psi88%2441 fps99.9%
SNPE Vectan BA6 1/2<<locked>>84%39,929 psi86%2247 fps100%
SNPE Vectan SP 3<<locked>>94%40,886 psi88%2497 fps97.3%
Somchem S335ᴾ<<locked>>100%40,001 psi86%2438 fps95.9%
Vihtavuori N120<<locked>>90%40,596 psi87%2438 fps100%
Vihtavuori N130<<locked>>96%41,060 psi88%2454 fps98.7%
Vihtavuori N133ᴾ<<locked>>100%37,884 psi82%2402 fps97.1%
Vihtavuori N135ᴾ<<locked>>100%32,169 psi69%2372 fps95.7%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%35,201 psi76%2313 fps97.6%
Accurate 2015<<locked>>92%31,618 psi68%2320 fps95.5%
Accurate 2495<<locked>>96%30,197 psi65%2379 fps95.3%
Accurate LT-30<<locked>>86%36,637 psi79%2323 fps95.2%
ADI AR 2207<<locked>>80%31,633 psi68%2313 fps99.5%
ADI AR 2219<<locked>>90%39,305 psi85%2484 fps95.7%
Alliant AR-Comp<<locked>>88%27,137 psi58%2254 fps95.9%
Alliant Reloder-10x26.6 gr82%27,949 psi60%2241 fps95.3%
Alliant Reloder-7<<locked>>80%33,301 psi72%2303 fps97.6%
Baschieri & Pellagri 106<<locked>>86%35,360 psi76%2310 fps95.2%
Hodgdon H322<<locked>>94%37,202 psi80%2441 fps95%
Hodgdon H4198<<locked>>86%38,943 psi84%2372 fps95.1%
Hodgdon TrailBoss<<locked>>80%22,597 psi49%1417 fps100%
IMR 4198<<locked>>80%29,022 psi63%2211 fps96.4%
IMR 4227<<locked>>80%39,262 psi85%2379 fps99.8%
Lovex S053<<locked>>80%38,406 psi83%2349 fps100%
Norma 20026.9 gr80%29,660 psi64%2270 fps96.8%
ReloadSwiss RS 14<<locked>>80%22,089 psi48%1447 fps100%
ReloadSwiss RS 36<<locked>>80%38,551 psi83%2402 fps99.7%
SNPE Vectan BA6 1/2<<locked>>80%35,926 psi77%2185 fps100%
SNPE Vectan SP 328.6 gr88%33,736 psi73%2356 fps95%
Somchem S335<<locked>>98%37,855 psi82%2398 fps95.3%
Vihtavuori N120<<locked>>80%29,704 psi64%2238 fps99.7%
Vihtavuori N130<<locked>>84%28,485 psi61%2198 fps95.1%
Vihtavuori N133<<locked>>94%31,807 psi69%2277 fps95.1%
Vihtavuori N135<<locked>>98%30,371 psi65%2329 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .30-30 Ackley Improved loaded with the .308 | 130gr | Atomic 29 HP. Alliant AR-Comp delivers the highest muzzle velocity at 2,536 fps; across all powders the maximum-charge window runs from 1,585 fps to 2,536 fps. Accurate 2015 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 65–90 %, leaving at least 10 % headroom. The 130.0 gr projectile in 0.308" calls for a 1:14.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, SNPE Vectan SP 3, Norma 200 rank at the top here: for .30-30 Ackley Improved with the .308 | 130gr | Atomic 29 HP they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data