Load data for .30-30 Ackley Improved + .308 | 125gr | CutEdge Maximus

.30-30 Ackley Improved cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:125 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.03"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:48.6 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:14.5

Load data in caliber .30-30 Ackley Improved with .308 | 125gr | CutEdge Maximus bullet and 22 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, SNPE Vectan SP 3 and Norma 200.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>84%40,582 psi87%2470 fps98.7%
Accurate 2015ᴾ<<locked>>100%41,394 psi89%2566 fps98.1%
Accurate LT-30<<locked>>90%41,814 psi90%2477 fps96.6%
ADI AR 2207<<locked>>88%39,900 psi86%2539 fps100%
ADI AR 2219<<locked>>92%41,292 psi89%2589 fps96.3%
Alliant AR-Compᴾ<<locked>>100%38,537 psi83%2589 fps99.5%
Alliant Reloder-10x<<locked>>94%39,842 psi86%2562 fps98.8%
Alliant Reloder-7<<locked>>88%41,771 psi90%2536 fps99.3%
Baschieri & Pellagri 106<<locked>>90%39,610 psi85%2454 fps96.4%
Hodgdon H322<<locked>>98%41,292 psi89%2589 fps96.3%
Hodgdon TrailBossᴾ<<locked>>100%30,124 psi65%1627 fps100%
IMR 4198<<locked>>92%40,248 psi87%2520 fps99.3%
IMR 4227<<locked>>82%40,857 psi88%2474 fps99.9%
Lovex S053<<locked>>82%39,856 psi86%2444 fps100%
Norma 200<<locked>>90%39,755 psi86%2549 fps99.2%
ReloadSwiss RS 14ᴾ<<locked>>100%29,921 psi64%1670 fps100%
ReloadSwiss RS 36<<locked>>82%40,089 psi86%2497 fps99.8%
SNPE Vectan BA6 1/2<<locked>>86%41,321 psi89%2336 fps100%
SNPE Vectan SP 3<<locked>>94%41,234 psi89%2566 fps97.3%
Vihtavuori N120<<locked>>90%39,726 psi86%2493 fps100%
Vihtavuori N130<<locked>>96%40,219 psi87%2507 fps98.5%
Vihtavuori N133ᴾ<<locked>>100%37,014 psi80%2451 fps96.8%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%35,404 psi76%2375 fps97.5%
Accurate 2015<<locked>>92%31,966 psi69%2385 fps95.5%
Accurate LT-30<<locked>>86%36,840 psi79%2385 fps95.1%
ADI AR 2207<<locked>>80%30,705 psi66%2362 fps99.4%
ADI AR 2219<<locked>>90%38,334 psi83%2533 fps95.4%
Alliant AR-Comp<<locked>>88%26,194 psi56%2293 fps95.3%
Alliant Reloder-10x28.3 gr84%28,761 psi62%2329 fps95.6%
Alliant Reloder-7<<locked>>80%32,532 psi70%2356 fps97.3%
Baschieri & Pellagri 106<<locked>>88%37,333 psi80%2415 fps95.8%
Hodgdon H322<<locked>>96%38,711 psi83%2539 fps95.5%
Hodgdon TrailBoss<<locked>>80%21,944 psi47%1457 fps100%
IMR 4198<<locked>>80%28,094 psi61%2254 fps95.9%
IMR 4227<<locked>>80%38,580 psi83%2434 fps99.7%
Lovex S053<<locked>>80%37,318 psi80%2402 fps100%
Norma 20028 gr80%28,587 psi62%2313 fps96.4%
ReloadSwiss RS 14<<locked>>80%21,640 psi47%1490 fps100%
ReloadSwiss RS 36<<locked>>80%37,550 psi81%2451 fps99.5%
SNPE Vectan BA6 1/2<<locked>>80%35,172 psi76%2241 fps100%
SNPE Vectan SP 329.7 gr88%33,953 psi73%2421 fps95%
Vihtavuori N120<<locked>>80%28,877 psi62%2283 fps99.6%
Vihtavuori N130<<locked>>86%29,312 psi63%2283 fps95.4%
Vihtavuori N133<<locked>>96%32,866 psi71%2365 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 22 powders for .30-30 Ackley Improved loaded with the .308 | 125gr | CutEdge Maximus. ADI AR 2219 delivers the highest muzzle velocity at 2,589 fps; across all powders the maximum-charge window runs from 1,627 fps to 2,589 fps. Accurate 2015 gives the best case fill at 100 %, and 22 of the 22 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 64–90 %, leaving at least 10 % headroom. The 125.0 gr projectile in 0.308" calls for a 1:14.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, SNPE Vectan SP 3, Norma 200 rank at the top here: for .30-30 Ackley Improved with the .308 | 125gr | CutEdge Maximus they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data