Load data for .280 Riml. N.E. Ross + .284 | 140gr | Swift A-Frame

.280 Riml. N.E. Ross cartridge drawing
Swift logo

Load Specifications

Bullet Manufacturer:Swift
Bullet Weight:140 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):2.61"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:83 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:26"
Max. allowed Pressure:47,137 psi
Recommended Twist Rate:1:13.0

Load data in caliber .280 Riml. N.E. Ross with .284 | 140gr | Swift A-Frame bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Winchester StaBALL HD, Hodgdon Retumbo and ReloadSwiss RS 76.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>86%40,509 psi86%2779 fps98.7%
ADI AR 2209<<locked>>84%42,264 psi90%2858 fps96.8%
ADI AR 2225ᴾ<<locked>>100%42,163 psi89%2946 fps98.9%
Alliant Reloder-19<<locked>>84%42,177 psi89%2851 fps96.8%
Alliant Reloder-22<<locked>>86%40,437 psi86%2854 fps96.4%
Alliant Reloder-23<<locked>>88%41,263 psi88%2861 fps100%
Alliant Reloder-25<<locked>>92%40,785 psi87%2897 fps99.4%
Alliant Reloder-26<<locked>>84%40,045 psi85%2907 fps99.6%
Bofors RP15<<locked>>88%39,885 psi85%2838 fps96.1%
Bofors RP5<<locked>>86%40,437 psi86%2854 fps96.4%
Hodgdon H1000<<locked>>94%42,583 psi90%2890 fps96.5%
Hodgdon Retumbo<<locked>>92%40,045 psi85%2936 fps97.1%
Hodgdon TrailBossᴾ<<locked>>100%36,941 psi78%1929 fps100%
Lovex S071<<locked>>92%41,872 psi89%2808 fps98.9%
Norma 217ᴾ<<locked>>100%37,826 psi80%2864 fps97%
Norma MRP<<locked>>86%42,511 psi90%2933 fps98.4%
Ramshot Magnum<<locked>>90%39,494 psi84%2825 fps97.1%
ReloadSwiss RS 14ᴾ<<locked>>100%37,782 psi80%1975 fps100%
ReloadSwiss RS 76<<locked>>94%42,482 psi90%2989 fps98.9%
Rottweil R 905<<locked>>84%41,553 psi88%2838 fps96.8%
SNPE Vectan Tubal 8000<<locked>>84%41,191 psi87%2831 fps96.7%
Somchem S385<<locked>>84%42,134 psi89%2818 fps97.7%
Vihtavuori N165<<locked>>88%41,626 psi88%2795 fps97.3%
Vihtavuori N555<<locked>>84%40,625 psi86%2831 fps99.8%
Winchester StaBALL HD<<locked>>90%40,422 psi86%2972 fps100%
Winchester Supreme 780<<locked>>86%41,437 psi88%2799 fps96.6%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>80%33,011 psi70%2602 fps96.5%
ADI AR 2209<<locked>>80%37,101 psi79%2736 fps95%
ADI AR 2225<<locked>>92%32,692 psi69%2690 fps95.1%
Alliant Reloder-19<<locked>>80%37,086 psi79%2730 fps95.1%
Alliant Reloder-22<<locked>>84%37,681 psi80%2789 fps95.5%
Alliant Reloder-23<<locked>>80%31,589 psi67%2631 fps99.2%
Alliant Reloder-25<<locked>>82%29,530 psi63%2589 fps95.6%
Alliant Reloder-26<<locked>>80%34,432 psi73%2769 fps98.4%
Bofors RP15<<locked>>86%37,376 psi79%2779 fps95.2%
Bofors RP5<<locked>>84%37,681 psi80%2789 fps95.5%
Hodgdon H1000<<locked>>92%39,711 psi84%2822 fps95.4%
Hodgdon Retumbo65 gr90%37,391 psi79%2864 fps96%
Hodgdon TrailBoss<<locked>>80%27,717 psi59%1726 fps100%
Lovex S071<<locked>>82%30,298 psi64%2526 fps95.4%
Norma 217<<locked>>98%35,288 psi75%2799 fps95.9%
Norma MRP<<locked>>80%34,374 psi73%2733 fps95.8%
Ramshot Magnum<<locked>>86%34,243 psi73%2694 fps95%
ReloadSwiss RS 14<<locked>>80%28,181 psi60%1765 fps100%
ReloadSwiss RS 7668 gr88%34,229 psi73%2769 fps95.8%
Rottweil R 905<<locked>>80%36,216 psi77%2710 fps95%
SNPE Vectan Tubal 8000<<locked>>82%38,551 psi82%2772 fps95.8%
Somchem S385<<locked>>80%36,898 psi78%2697 fps96.2%
Vihtavuori N165<<locked>>84%36,376 psi77%2680 fps95.6%
Vihtavuori N555<<locked>>80%35,563 psi75%2717 fps99.1%
Winchester StaBALL HD59.4 gr80%28,152 psi60%2641 fps99.2%
Winchester Supreme 780<<locked>>84%38,609 psi82%2736 fps95.7%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for .280 Riml. N.E. Ross loaded with the .284 | 140gr | Swift A-Frame. ReloadSwiss RS 76 delivers the highest muzzle velocity at 2,989 fps; across all powders the maximum-charge window runs from 1,929 fps to 2,989 fps. ADI AR 2225 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (325 MPa), the top charges use 78–90 %, leaving at least 10 % headroom. The 140.0 gr projectile in 0.284" calls for a 1:13.0 twist; slower twists will usually not stabilise this weight. ADI AR 2225, Hodgdon TrailBoss, Norma 217 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Winchester StaBALL HD, Hodgdon Retumbo, ReloadSwiss RS 76 rank at the top here: for .280 Riml. N.E. Ross with the .284 | 140gr | Swift A-Frame they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data