Load data for .280 Riml. N.E. Ross + .284 | 139gr | MEN SF

.280 Riml. N.E. Ross cartridge drawing
MEN logo

Load Specifications

Bullet Manufacturer:MEN
Bullet Weight:139 gr
Bullet Diameter:0.284"
Bullet Length:<<locked>>
Case Length (l3):2.61"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:83 Grains of Water
Primer Size:Large Rifle Magnum (LRM)
Barrel Length:26"
Max. allowed Pressure:47,137 psi
Recommended Twist Rate:1:11.0

Load data in caliber .280 Riml. N.E. Ross with .284 | 139gr | MEN SF bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon Retumbo, Winchester StaBALL HD and ReloadSwiss RS 76.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>88%41,945 psi89%2815 fps98.8%
ADI AR 2209<<locked>>84%41,220 psi87%2838 fps96.2%
ADI AR 2225ᴾ<<locked>>100%40,828 psi87%2913 fps98.3%
Alliant Reloder-19<<locked>>84%41,089 psi87%2831 fps96.3%
Alliant Reloder-22<<locked>>88%41,843 psi89%2890 fps96.7%
Alliant Reloder-23<<locked>>90%42,656 psi90%2897 fps100%
Alliant Reloder-25<<locked>>94%42,322 psi90%2936 fps99.6%
Alliant Reloder-26<<locked>>86%41,437 psi88%2946 fps99.7%
Bofors RP15<<locked>>90%41,278 psi88%2877 fps96.3%
Bofors RP5<<locked>>88%41,843 psi89%2890 fps96.7%
Hodgdon Hybrid 100V<<locked>>82%41,611 psi88%2799 fps100%
Hodgdon Retumbo<<locked>>94%41,336 psi88%2972 fps97.3%
Hodgdon TrailBossᴾ<<locked>>100%36,854 psi78%1926 fps100%
Lovex S071<<locked>>92%40,538 psi86%2785 fps98.5%
Norma 217ᴾ<<locked>>100%36,419 psi77%2835 fps96.2%
Norma MRP<<locked>>86%40,988 psi87%2904 fps97.8%
Ramshot Magnum<<locked>>92%41,133 psi87%2867 fps97.3%
ReloadSwiss RS 14ᴾ<<locked>>100%37,710 psi80%1972 fps100%
ReloadSwiss RS 76<<locked>>94%41,031 psi87%2959 fps98.3%
Rottweil R 905<<locked>>84%40,234 psi85%2815 fps96.2%
SNPE Vectan Tubal 8000<<locked>>86%42,641 psi90%2867 fps96.9%
Somchem S365<<locked>>82%42,018 psi89%2854 fps100%
Somchem S385<<locked>>84%40,872 psi87%2795 fps97.2%
Vihtavuori N165<<locked>>88%40,437 psi86%2776 fps96.8%
Vihtavuori N555<<locked>>86%41,959 psi89%2867 fps99.9%
Winchester StaBALL HD<<locked>>92%41,568 psi88%3009 fps100%
Winchester Supreme 780<<locked>>86%40,263 psi85%2779 fps96%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>80%31,952 psi68%2582 fps95.9%
ADI AR 2209<<locked>>82%38,580 psi82%2776 fps95.3%
ADI AR 2225<<locked>>94%33,736 psi72%2723 fps95.4%
Alliant Reloder-19<<locked>>82%38,464 psi82%2769 fps95.4%
Alliant Reloder-22<<locked>>86%39,160 psi83%2831 fps95.8%
Alliant Reloder-23<<locked>>80%30,589 psi65%2608 fps98.8%
Alliant Reloder-25<<locked>>84%30,618 psi65%2628 fps95.9%
Alliant Reloder-26<<locked>>80%33,243 psi71%2743 fps97.9%
Bofors RP15<<locked>>88%38,638 psi82%2815 fps95.4%
Bofors RP5<<locked>>86%39,160 psi83%2831 fps95.8%
Hodgdon Hybrid 100V<<locked>>80%38,841 psi82%2743 fps99.9%
Hodgdon Retumbo63.7 gr90%36,318 psi77%2835 fps95.1%
Hodgdon TrailBoss<<locked>>80%27,644 psi59%1722 fps100%
Lovex S071<<locked>>84%31,343 psi66%2562 fps95.6%
Norma 217<<locked>>98%34,084 psi72%2769 fps95.1%
Norma MRP<<locked>>80%33,199 psi70%2707 fps95%
Ramshot Magnum<<locked>>88%35,520 psi75%2730 fps95.3%
ReloadSwiss RS 14<<locked>>80%28,108 psi60%1762 fps100%
ReloadSwiss RS 7668.1 gr90%35,520 psi75%2808 fps96.2%
Rottweil R 905<<locked>>82%37,579 psi80%2749 fps95.3%
SNPE Vectan Tubal 8000<<locked>>82%37,246 psi79%2746 fps95.1%
Somchem S365<<locked>>80%39,175 psi83%2799 fps100%
Somchem S385<<locked>>80%35,853 psi76%2677 fps95.6%
Vihtavuori N165<<locked>>84%35,389 psi75%2657 fps95%
Vihtavuori N555<<locked>>80%34,389 psi73%2694 fps98.8%
Winchester StaBALL HD58.1 gr80%27,180 psi58%2608 fps98.7%
Winchester Supreme 780<<locked>>84%37,449 psi79%2717 fps95%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .280 Riml. N.E. Ross loaded with the .284 | 139gr | MEN SF. Winchester StaBALL HD delivers the highest muzzle velocity at 3,009 fps; across all powders the maximum-charge window runs from 1,926 fps to 3,009 fps. ADI AR 2225 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (325 MPa), the top charges use 77–90 %, leaving at least 10 % headroom. The 139.0 gr projectile in 0.284" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. ADI AR 2225, Hodgdon TrailBoss, Norma 217 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon Retumbo, Winchester StaBALL HD, ReloadSwiss RS 76 rank at the top here: for .280 Riml. N.E. Ross with the .284 | 139gr | MEN SF they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data