
Load Specifications
Load data in caliber .277 Fury Commercial with .277 | 87gr | CutEdge ESP Raptor bullet and 48 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, ADI AR 2219 and SNPE Vectan SP 10.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 20"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 86% | 54,737 psi | 87% | 3114 fps | 100% |
| Accurate 2015ᴾ | <<locked>> | 100% | 55,361 psi | 88% | 3202 fps | 99.8% |
| Accurate 2460 | <<locked>> | 96% | 54,259 psi | 86% | 3202 fps | 97.9% |
| Accurate 2495ᴾ | <<locked>> | 100% | 42,859 psi | 68% | 3038 fps | 98.5% |
| Accurate 2520ᴾ | <<locked>> | 100% | 55,332 psi | 88% | 3255 fps | 97.6% |
| Accurate LT-30 | <<locked>> | 92% | 55,317 psi | 88% | 3130 fps | 99.1% |
| Accurate LT-32 | <<locked>> | 92% | 55,796 psi | 88% | 3143 fps | 97.8% |
| ADI AR 2207 | <<locked>> | 90% | 54,926 psi | 87% | 3179 fps | 100% |
| ADI AR 2219 | <<locked>> | 92% | 53,882 psi | 85% | 3232 fps | 98.8% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 51,851 psi | 82% | 3238 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 96% | 55,579 psi | 88% | 3235 fps | 100% |
| Alliant Reloder-7 | <<locked>> | 90% | 56,695 psi | 90% | 3192 fps | 100% |
| Baschieri & Pellagri 106 | <<locked>> | 92% | 54,186 psi | 86% | 3110 fps | 99.2% |
| Hodgdon Benchmark | <<locked>> | 98% | 54,607 psi | 87% | 3166 fps | 96.4% |
| Hodgdon H322 | <<locked>> | 96% | 55,593 psi | 88% | 3261 fps | 99% |
| Hodgdon H335 | <<locked>> | 94% | 53,447 psi | 85% | 3215 fps | 97.9% |
| Hodgdon H4198 | <<locked>> | 88% | 53,969 psi | 86% | 3133 fps | 98.6% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 32,285 psi | 51% | 1978 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 48,863 psi | 77% | 3205 fps | 98.8% |
| IMR 4198 | <<locked>> | 94% | 53,867 psi | 85% | 3169 fps | 100% |
| IMR 4227 | <<locked>> | 86% | 57,014 psi | 90% | 3150 fps | 100% |
| Lovex D073.4 | <<locked>> | 90% | 55,158 psi | 87% | 3232 fps | 97.4% |
| Lovex D073.5 | <<locked>> | 96% | 54,650 psi | 87% | 3205 fps | 96.7% |
| Lovex D073.6ᴾ | <<locked>> | 100% | 48,515 psi | 77% | 3146 fps | 96.2% |
| Lovex S053 | <<locked>> | 86% | 55,230 psi | 88% | 3091 fps | 100% |
| Norma 200 | <<locked>> | 92% | 55,840 psi | 89% | 3219 fps | 100% |
| Norma 202ᴾ | <<locked>> | 100% | 49,951 psi | 79% | 3153 fps | 97.3% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 31,850 psi | 50% | 2018 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 84% | 53,621 psi | 85% | 3130 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 96% | 55,201 psi | 87% | 3225 fps | 97.3% |
| Rottweil R 901ᴾ | <<locked>> | 100% | 53,708 psi | 85% | 3192 fps | 97.8% |
| Shooters World AR Plus | <<locked>> | 90% | 55,158 psi | 87% | 3232 fps | 97.4% |
| Shooters World Match Rifleᴾ | <<locked>> | 100% | 48,515 psi | 77% | 3146 fps | 96.2% |
| SNPE Vectan BA6 1/2 | <<locked>> | 90% | 55,811 psi | 88% | 2930 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 92% | 54,230 psi | 86% | 3225 fps | 98% |
| SNPE Vectan SP 3 | <<locked>> | 96% | 56,971 psi | 90% | 3255 fps | 99.6% |
| SNPE Vectan Tubal 3000ᴾ | <<locked>> | 100% | 53,432 psi | 85% | 3120 fps | 97.8% |
| SNPE Vectan Tubal 5000ᴾ | <<locked>> | 100% | 42,757 psi | 68% | 2933 fps | 96.7% |
| Somchem S321 | <<locked>> | 98% | 56,492 psi | 90% | 3261 fps | 96.4% |
| Somchem S335ᴾ | <<locked>> | 100% | 51,416 psi | 81% | 3107 fps | 98.3% |
| Vihtavuori N120 | <<locked>> | 90% | 54,984 psi | 87% | 3130 fps | 100% |
| Vihtavuori N130 | <<locked>> | 98% | 56,608 psi | 90% | 3182 fps | 100% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 52,533 psi | 83% | 3123 fps | 99.5% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 44,338 psi | 70% | 3061 fps | 98.7% |
| Vihtavuori N140ᴾ | <<locked>> | 100% | 47,094 psi | 75% | 3071 fps | 97.1% |
| Vihtavuori N530ᴾ | <<locked>> | 100% | 55,869 psi | 89% | 3222 fps | 95.9% |
| Vihtavuori N540ᴾ | <<locked>> | 100% | 45,818 psi | 73% | 3054 fps | 96.2% |
| Winchester 748ᴾ | <<locked>> | 100% | 53,708 psi | 85% | 3255 fps | 96.5% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 20"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 44,541 psi | 71% | 2936 fps | 99.3% |
| Accurate 2015 | <<locked>> | 84% | 32,764 psi | 52% | 2736 fps | 95.2% |
| Accurate 2460 | <<locked>> | 90% | 44,164 psi | 70% | 3015 fps | 95.6% |
| Accurate 2495 | <<locked>> | 92% | 32,329 psi | 51% | 2789 fps | 95.4% |
| Accurate 2520 | <<locked>> | 94% | 44,425 psi | 70% | 3054 fps | 95.1% |
| Accurate LT-30 | <<locked>> | 80% | 38,014 psi | 60% | 2789 fps | 95.5% |
| Accurate LT-32 | <<locked>> | 84% | 43,511 psi | 69% | 2910 fps | 95% |
| ADI AR 2207 | <<locked>> | 80% | 40,045 psi | 63% | 2913 fps | 100% |
| ADI AR 2219 | 37.3 gr | 82% | 37,855 psi | 60% | 2904 fps | 95% |
| Alliant AR-Comp | <<locked>> | 82% | 28,311 psi | 45% | 2687 fps | 96% |
| Alliant Reloder-10x | <<locked>> | 80% | 33,431 psi | 53% | 2776 fps | 96.7% |
| Alliant Reloder-7 | <<locked>> | 80% | 41,176 psi | 65% | 2910 fps | 99.1% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 36,419 psi | 58% | 2762 fps | 95.4% |
| Hodgdon Benchmark | <<locked>> | 96% | 51,213 psi | 81% | 3104 fps | 95.6% |
| Hodgdon H322 | 37.9 gr | 86% | 39,624 psi | 63% | 2946 fps | 95.6% |
| Hodgdon H335 | <<locked>> | 88% | 43,410 psi | 69% | 3022 fps | 95.6% |
| Hodgdon H4198 | <<locked>> | 80% | 41,930 psi | 66% | 2897 fps | 96% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,598 psi | 37% | 1768 fps | 100% |
| IMR 3031 | <<locked>> | 92% | 37,521 psi | 59% | 2956 fps | 95.9% |
| IMR 4198 | <<locked>> | 80% | 35,128 psi | 56% | 2785 fps | 98.2% |
| IMR 4227 | <<locked>> | 80% | 47,485 psi | 75% | 2995 fps | 100% |
| Lovex D073.4 | <<locked>> | 86% | 47,514 psi | 75% | 3094 fps | 95.7% |
| Lovex D073.5 | <<locked>> | 92% | 47,268 psi | 75% | 3071 fps | 95% |
| Lovex D073.6 | <<locked>> | 98% | 45,165 psi | 72% | 3081 fps | 95.3% |
| Lovex S053 | <<locked>> | 80% | 46,195 psi | 73% | 2943 fps | 100% |
| Norma 200 | <<locked>> | 80% | 37,652 psi | 60% | 2867 fps | 98.6% |
| Norma 202 | <<locked>> | 96% | 43,540 psi | 69% | 3025 fps | 95.7% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 23,366 psi | 37% | 1804 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 47,253 psi | 75% | 3022 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 92% | 48,298 psi | 77% | 3100 fps | 95.8% |
| Rottweil R 901 | <<locked>> | 94% | 44,701 psi | 71% | 3022 fps | 95.8% |
| Shooters World AR Plus | <<locked>> | 86% | 47,514 psi | 75% | 3094 fps | 95.7% |
| Shooters World Match Rifle | <<locked>> | 98% | 45,165 psi | 72% | 3081 fps | 95.3% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 42,409 psi | 67% | 2726 fps | 100% |
| SNPE Vectan SP 10 | 40.5 gr | 86% | 44,193 psi | 70% | 3035 fps | 95.8% |
| SNPE Vectan SP 3 | <<locked>> | 82% | 36,376 psi | 58% | 2844 fps | 95.6% |
| SNPE Vectan Tubal 3000 | <<locked>> | 92% | 41,481 psi | 66% | 2894 fps | 95% |
| SNPE Vectan Tubal 5000 | <<locked>> | 96% | 37,536 psi | 59% | 2818 fps | 95.1% |
| Somchem S321 | <<locked>> | 96% | 52,779 psi | 84% | 3196 fps | 95.6% |
| Somchem S335 | <<locked>> | 92% | 40,132 psi | 64% | 2884 fps | 95.7% |
| Vihtavuori N120 | <<locked>> | 80% | 40,205 psi | 64% | 2877 fps | 100% |
| Vihtavuori N130 | <<locked>> | 80% | 32,184 psi | 51% | 2687 fps | 96% |
| Vihtavuori N133 | <<locked>> | 86% | 33,823 psi | 54% | 2736 fps | 95.5% |
| Vihtavuori N135 | <<locked>> | 92% | 34,098 psi | 54% | 2828 fps | 96% |
| Vihtavuori N140 | <<locked>> | 96% | 41,423 psi | 66% | 2953 fps | 95.5% |
| Vihtavuori N530 | <<locked>> | 98% | 52,083 psi | 83% | 3156 fps | 95.1% |
| Vihtavuori N540 | <<locked>> | 98% | 42,830 psi | 68% | 2992 fps | 95.3% |
| Winchester 748 | <<locked>> | 98% | 49,806 psi | 79% | 3182 fps | 95.5% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 48 powders for .277 Fury Commercial loaded with the .277 | 87gr | CutEdge ESP Raptor. Hodgdon H322 delivers the highest muzzle velocity at 3,261 fps; across all powders the maximum-charge window runs from 1,978 fps to 3,261 fps. Accurate 2015 gives the best case fill at 100 %, and 48 of the 48 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (435 MPa), the top charges use 50–90 %, leaving at least 10 % headroom. The 87.0 gr projectile in 0.277" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Accurate 2520 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, ADI AR 2219, SNPE Vectan SP 10 rank at the top here: for .277 Fury Commercial with the .277 | 87gr | CutEdge ESP Raptor they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.