Load data for .240 Flang. N.E. + .243 | 100gr | MEN FMJ

.240 Flang. N.E. cartridge drawing
MEN logo

Load Specifications

Bullet Manufacturer:MEN
Bullet Weight:100 gr
Bullet Diameter:0.243"
Bullet Length:<<locked>>
Case Length (l3):2.496"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:56.99 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:26"
Max. allowed Pressure:46,412 psi
Recommended Twist Rate:1:11.0

Load data in caliber .240 Flang. N.E. with .243 | 100gr | MEN FMJ bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Winchester StaBALL HD, Alliant Reloder-26 and Alliant Reloder-23.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>92%40,379 psi87%2831 fps97.3%
Accurate 4350<<locked>>82%39,276 psi85%2828 fps98.5%
Alliant Reloder-16<<locked>>84%40,683 psi88%2897 fps99.1%
Alliant Reloder-23<<locked>>94%41,046 psi88%2920 fps99.9%
Alliant Reloder-25<<locked>>98%40,756 psi88%2940 fps98.2%
Alliant Reloder-26<<locked>>90%39,885 psi86%2966 fps98.6%
Hodgdon H414<<locked>>82%41,176 psi89%2874 fps96.5%
Hodgdon Hybrid 100V<<locked>>86%40,698 psi88%2835 fps99.7%
Hodgdon TrailBossᴾ<<locked>>100%36,216 psi78%1929 fps100%
IMR 4350<<locked>>84%41,321 psi89%2818 fps95.9%
IMR 4831<<locked>>84%40,205 psi87%2831 fps98.7%
Lovex S070<<locked>>82%40,335 psi87%2799 fps96.4%
Lovex S071<<locked>>98%41,234 psi89%2848 fps97.5%
Norma URP<<locked>>84%41,553 psi90%2881 fps98.8%
Ramshot Hunter<<locked>>84%40,393 psi87%2864 fps97.2%
ReloadSwiss RS 14ᴾ<<locked>>100%37,101 psi80%1978 fps100%
ReloadSwiss RS 62<<locked>>84%41,655 psi90%2904 fps98.7%
ReloadSwiss RS 70<<locked>>84%40,727 psi88%2920 fps98.3%
Shooters World SW4350<<locked>>82%40,335 psi87%2799 fps96.4%
SNPE Vectan Tubal 7000<<locked>>82%41,553 psi90%2766 fps96.6%
Somchem S365<<locked>>86%40,379 psi87%2890 fps100%
Vihtavuori N160<<locked>>82%40,480 psi87%2822 fps98.6%
Vihtavuori N550<<locked>>82%40,001 psi86%2825 fps98.3%
Vihtavuori N555<<locked>>90%40,306 psi87%2890 fps99.1%
Winchester 6.5 StaBALL<<locked>>82%39,784 psi86%2789 fps99.8%
Winchester 760<<locked>>82%41,452 psi89%2881 fps96.6%
Winchester StaBALL HD<<locked>>98%41,974 psi90%3081 fps100%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 26"

PowderChargeFRMaxP%V(0)z
Accurate 3100<<locked>>88%35,157 psi76%2710 fps95.6%
Accurate 4350<<locked>>80%36,579 psi79%2766 fps97.8%
Alliant Reloder-16<<locked>>80%35,810 psi77%2779 fps97.9%
Alliant Reloder-2338.6 gr80%26,136 psi56%2507 fps95.2%
Alliant Reloder-25<<locked>>92%33,794 psi73%2756 fps95.6%
Alliant Reloder-2644.6 gr84%32,111 psi69%2756 fps95.8%
Hodgdon H414<<locked>>80%38,508 psi83%2812 fps95.6%
Hodgdon Hybrid 100V<<locked>>80%33,214 psi72%2664 fps98.4%
Hodgdon TrailBoss<<locked>>80%27,093 psi58%1726 fps100%
IMR 4350<<locked>>82%38,972 psi84%2766 fps95.1%
IMR 4831<<locked>>80%35,099 psi76%2713 fps97.4%
Lovex S070<<locked>>80%38,014 psi82%2746 fps95.7%
Lovex S071<<locked>>92%33,968 psi73%2680 fps95.2%
Norma URP<<locked>>80%36,521 psi79%2766 fps97.7%
Ramshot Hunter<<locked>>80%35,360 psi76%2743 fps95.5%
ReloadSwiss RS 14<<locked>>80%27,688 psi60%1772 fps100%
ReloadSwiss RS 62<<locked>>80%36,361 psi78%2782 fps97.4%
ReloadSwiss RS 70<<locked>>80%35,462 psi76%2789 fps96.7%
Shooters World SW4350<<locked>>80%38,014 psi82%2746 fps95.7%
SNPE Vectan Tubal 7000<<locked>>80%38,914 psi84%2707 fps95.8%
Somchem S365<<locked>>80%32,938 psi71%2717 fps99.4%
Vihtavuori N160<<locked>>80%37,840 psi82%2762 fps98%
Vihtavuori N550<<locked>>80%37,202 psi80%2759 fps97.6%
Vihtavuori N555<<locked>>80%28,616 psi62%2589 fps95.4%
Winchester 6.5 StaBALL<<locked>>80%37,057 psi80%2730 fps99.5%
Winchester 760<<locked>>80%38,769 psi84%2818 fps95.7%
Winchester StaBALL HD42.8 gr84%26,310 psi57%2598 fps96.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .240 Flang. N.E. loaded with the .243 | 100gr | MEN FMJ. Winchester StaBALL HD delivers the highest muzzle velocity at 3,081 fps; across all powders the maximum-charge window runs from 1,929 fps to 3,081 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (320 MPa), the top charges use 78–90 %, leaving at least 10 % headroom. The 100.0 gr projectile in 0.243" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Winchester StaBALL HD, Alliant Reloder-26, Alliant Reloder-23 rank at the top here: for .240 Flang. N.E. with the .243 | 100gr | MEN FMJ they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data