
Load Specifications
Load data in caliber .24 Nosler with .243 | 90gr | CutEdge MTAC bullet and 48 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, Shooters World AR Plus and Lovex D073.4.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 86% | 48,762 psi | 89% | 2543 fps | 100% |
| Accurate 2015ᴾ | <<locked>> | 100% | 47,166 psi | 86% | 2605 fps | 99.8% |
| Accurate 2460 | <<locked>> | 98% | 49,356 psi | 90% | 2661 fps | 98.3% |
| Accurate 2495ᴾ | <<locked>> | 100% | 34,838 psi | 63% | 2474 fps | 98.5% |
| Accurate 2520ᴾ | <<locked>> | 100% | 45,963 psi | 84% | 2648 fps | 97.4% |
| Accurate LT-30 | <<locked>> | 92% | 49,313 psi | 90% | 2546 fps | 99.2% |
| Accurate LT-32 | <<locked>> | 90% | 47,166 psi | 86% | 2513 fps | 97.5% |
| ADI AR 2207 | <<locked>> | 90% | 48,544 psi | 88% | 2592 fps | 100% |
| ADI AR 2219 | <<locked>> | 92% | 46,601 psi | 85% | 2635 fps | 98.9% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 43,976 psi | 80% | 2638 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 96% | 48,704 psi | 89% | 2641 fps | 100% |
| Alliant Reloder-7 | <<locked>> | 88% | 47,137 psi | 86% | 2556 fps | 100% |
| Baschieri & Pellagri 106 | <<locked>> | 92% | 47,326 psi | 86% | 2539 fps | 99.2% |
| Hodgdon Benchmark | <<locked>> | 98% | 47,558 psi | 86% | 2575 fps | 96.4% |
| Hodgdon H322 | <<locked>> | 96% | 47,950 psi | 87% | 2657 fps | 99.1% |
| Hodgdon H335 | <<locked>> | 96% | 48,689 psi | 89% | 2674 fps | 98.4% |
| Hodgdon H4198 | <<locked>> | 88% | 48,225 psi | 88% | 2546 fps | 98.8% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 31,517 psi | 57% | 1572 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 41,858 psi | 76% | 2618 fps | 98.9% |
| IMR 4198 | <<locked>> | 94% | 47,703 psi | 87% | 2579 fps | 100% |
| IMR 4227 | <<locked>> | 84% | 48,602 psi | 88% | 2520 fps | 100% |
| Lovex D073.4 | <<locked>> | 90% | 47,108 psi | 86% | 2628 fps | 97.4% |
| Lovex D073.5 | <<locked>> | 98% | 49,414 psi | 90% | 2657 fps | 97.2% |
| Lovex D073.6ᴾ | <<locked>> | 100% | 40,001 psi | 73% | 2559 fps | 96% |
| Lovex S053 | <<locked>> | 86% | 49,617 psi | 90% | 2507 fps | 100% |
| Norma 200 | <<locked>> | 92% | 48,225 psi | 88% | 2618 fps | 100% |
| Norma 202ᴾ | <<locked>> | 100% | 42,612 psi | 77% | 2575 fps | 97.4% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 30,951 psi | 56% | 1601 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 84% | 47,964 psi | 87% | 2549 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 96% | 47,906 psi | 87% | 2635 fps | 97.4% |
| Rottweil R 901ᴾ | <<locked>> | 100% | 46,456 psi | 84% | 2605 fps | 97.9% |
| Shooters World AR Plus | <<locked>> | 90% | 47,108 psi | 86% | 2628 fps | 97.4% |
| Shooters World Match Rifleᴾ | <<locked>> | 100% | 40,001 psi | 73% | 2559 fps | 96% |
| SNPE Vectan BA6 1/2 | <<locked>> | 88% | 48,312 psi | 88% | 2339 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 92% | 47,210 psi | 86% | 2641 fps | 98.1% |
| SNPE Vectan SP 3 | <<locked>> | 96% | 49,719 psi | 90% | 2648 fps | 99.7% |
| SNPE Vectan Tubal 3000ᴾ | <<locked>> | 100% | 46,644 psi | 85% | 2543 fps | 97.9% |
| SNPE Vectan Tubal 5000ᴾ | <<locked>> | 100% | 37,188 psi | 68% | 2395 fps | 96.9% |
| Somchem S321 | <<locked>> | 98% | 47,906 psi | 87% | 2657 fps | 96.2% |
| Somchem S335ᴾ | <<locked>> | 100% | 44,324 psi | 81% | 2533 fps | 98.4% |
| Vihtavuori N120 | <<locked>> | 90% | 48,704 psi | 89% | 2546 fps | 100% |
| Vihtavuori N130 | <<locked>> | 98% | 49,124 psi | 89% | 2585 fps | 100% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 45,658 psi | 83% | 2546 fps | 99.6% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 37,507 psi | 68% | 2497 fps | 98.8% |
| Vihtavuori N140ᴾ | <<locked>> | 100% | 40,408 psi | 73% | 2510 fps | 97.1% |
| Vihtavuori N530ᴾ | <<locked>> | 100% | 47,819 psi | 87% | 2618 fps | 95.8% |
| Vihtavuori N540ᴾ | <<locked>> | 100% | 38,551 psi | 70% | 2490 fps | 96% |
| Winchester 748ᴾ | <<locked>> | 100% | 45,484 psi | 83% | 2648 fps | 96.2% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 39,639 psi | 72% | 2398 fps | 99.5% |
| Accurate 2015 | <<locked>> | 82% | 26,818 psi | 49% | 2201 fps | 95.3% |
| Accurate 2460 | <<locked>> | 88% | 35,012 psi | 64% | 2408 fps | 95% |
| Accurate 2495 | <<locked>> | 90% | 24,831 psi | 45% | 2234 fps | 95% |
| Accurate 2520 | <<locked>> | 94% | 36,883 psi | 67% | 2487 fps | 95.1% |
| Accurate LT-30 | <<locked>> | 80% | 33,968 psi | 62% | 2274 fps | 96.2% |
| Accurate LT-32 | <<locked>> | 84% | 38,928 psi | 71% | 2369 fps | 95.5% |
| ADI AR 2207 | <<locked>> | 80% | 35,259 psi | 64% | 2375 fps | 100% |
| ADI AR 2219 | <<locked>> | 82% | 33,243 psi | 60% | 2379 fps | 95.7% |
| Alliant AR-Comp | <<locked>> | 80% | 23,206 psi | 42% | 2152 fps | 95.9% |
| Alliant Reloder-10x | <<locked>> | 80% | 29,356 psi | 53% | 2277 fps | 97.6% |
| Alliant Reloder-7 | <<locked>> | 80% | 36,651 psi | 67% | 2375 fps | 99.4% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 31,995 psi | 58% | 2257 fps | 95.9% |
| Hodgdon Benchmark | <<locked>> | 94% | 42,177 psi | 77% | 2487 fps | 95% |
| Hodgdon H322 | 19.4 gr | 84% | 32,329 psi | 59% | 2356 fps | 95.3% |
| Hodgdon H335 | <<locked>> | 86% | 35,027 psi | 64% | 2421 fps | 95.1% |
| Hodgdon H4198 | <<locked>> | 80% | 37,550 psi | 68% | 2359 fps | 96.6% |
| Hodgdon TrailBoss | <<locked>> | 80% | 22,872 psi | 42% | 1398 fps | 100% |
| IMR 3031 | <<locked>> | 90% | 30,284 psi | 55% | 2365 fps | 95.5% |
| IMR 4198 | <<locked>> | 80% | 31,662 psi | 58% | 2280 fps | 98.8% |
| IMR 4227 | <<locked>> | 80% | 42,685 psi | 78% | 2428 fps | 100% |
| Lovex D073.4 | 20.8 gr | 84% | 37,855 psi | 69% | 2464 fps | 95.1% |
| Lovex D073.5 | <<locked>> | 94% | 42,830 psi | 78% | 2552 fps | 95.7% |
| Lovex D073.6 | <<locked>> | 98% | 37,739 psi | 69% | 2516 fps | 95.4% |
| Lovex S053 | <<locked>> | 80% | 41,959 psi | 76% | 2392 fps | 100% |
| Norma 200 | <<locked>> | 80% | 32,880 psi | 60% | 2346 fps | 99.1% |
| Norma 202 | <<locked>> | 94% | 34,969 psi | 64% | 2428 fps | 95.3% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 23,032 psi | 42% | 1440 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 42,264 psi | 77% | 2461 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 90% | 38,928 psi | 71% | 2477 fps | 95.1% |
| Rottweil R 901 | <<locked>> | 92% | 36,274 psi | 66% | 2418 fps | 95.4% |
| Shooters World AR Plus | 20.8 gr | 84% | 37,855 psi | 69% | 2464 fps | 95.1% |
| Shooters World Match Rifle | <<locked>> | 98% | 37,739 psi | 69% | 2516 fps | 95.4% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 39,044 psi | 71% | 2211 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 84% | 35,853 psi | 65% | 2434 fps | 95.4% |
| SNPE Vectan SP 3 | <<locked>> | 80% | 30,081 psi | 55% | 2274 fps | 95.6% |
| SNPE Vectan Tubal 3000 | <<locked>> | 92% | 36,027 psi | 66% | 2356 fps | 95.4% |
| SNPE Vectan Tubal 5000 | <<locked>> | 96% | 32,764 psi | 60% | 2303 fps | 95.4% |
| Somchem S321 | <<locked>> | 96% | 44,686 psi | 81% | 2605 fps | 95.4% |
| Somchem S335 | <<locked>> | 90% | 32,808 psi | 60% | 2316 fps | 95.4% |
| Vihtavuori N120 | <<locked>> | 80% | 35,476 psi | 65% | 2343 fps | 100% |
| Vihtavuori N130 | <<locked>> | 80% | 28,311 psi | 51% | 2195 fps | 96.8% |
| Vihtavuori N133 | <<locked>> | 84% | 27,963 psi | 51% | 2195 fps | 95.4% |
| Vihtavuori N135 | <<locked>> | 90% | 27,398 psi | 50% | 2264 fps | 95.7% |
| Vihtavuori N140 | <<locked>> | 96% | 35,665 psi | 65% | 2415 fps | 95.8% |
| Vihtavuori N530 | <<locked>> | 98% | 44,498 psi | 81% | 2566 fps | 95% |
| Vihtavuori N540 | <<locked>> | 98% | 36,506 psi | 66% | 2448 fps | 95.4% |
| Winchester 748 | <<locked>> | 98% | 42,482 psi | 77% | 2592 fps | 95.4% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 48 powders for .24 Nosler loaded with the .243 | 90gr | CutEdge MTAC. Hodgdon H335 delivers the highest muzzle velocity at 2,674 fps; across all powders the maximum-charge window runs from 1,572 fps to 2,674 fps. Accurate 2015 gives the best case fill at 100 %, and 48 of the 48 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (379 MPa), the top charges use 56–90 %, leaving at least 10 % headroom. The 90.0 gr projectile in 0.243" calls for a 1:8.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Accurate 2520 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, Shooters World AR Plus, Lovex D073.4 rank at the top here: for .24 Nosler with the .243 | 90gr | CutEdge MTAC they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.