Load data for .225 Win. + .224 | 35gr | Inceptor SRR

.225 Win. cartridge drawing
Inceptor logo

Load Specifications

Bullet Manufacturer:Inceptor
Bullet Weight:35 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.929"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:40 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:56,565 psi
Recommended Twist Rate:1:9.5

Load data in caliber .225 Win. with .224 | 35gr | Inceptor SRR bullet and 32 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, Alliant Reloder-10x and SNPE Vectan SP 3.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%51,140 psi90%3786 fps99.4%
Accurate 2015<<locked>>98%47,993 psi85%3793 fps98.4%
Accurate 2460<<locked>>96%51,010 psi90%3842 fps96.3%
Accurate 2495ᴾ<<locked>>100%39,610 psi70%3645 fps96.9%
Accurate LT-30<<locked>>90%48,646 psi86%3730 fps97.1%
ADI AR 2207<<locked>>90%50,778 psi90%3888 fps100%
ADI AR 2219<<locked>>92%50,328 psi89%3894 fps97.4%
Alliant AR-Compᴾ<<locked>>100%47,979 psi85%3901 fps99.9%
Alliant Reloder-10x<<locked>>94%48,544 psi86%3862 fps99.2%
Alliant Reloder-7<<locked>>88%49,240 psi87%3816 fps99.5%
Baschieri & Pellagri 106<<locked>>90%47,703 psi84%3681 fps97.5%
Hodgdon H322<<locked>>94%48,341 psi85%3855 fps96.9%
Hodgdon H335<<locked>>94%50,372 psi89%3868 fps96.5%
Hodgdon H4198<<locked>>88%50,256 psi89%3802 fps96.8%
Hodgdon TrailBossᴾ<<locked>>100%30,690 psi54%2595 fps100%
IMR 3031ᴾ<<locked>>100%45,179 psi80%3842 fps97.1%
IMR 4198<<locked>>94%50,067 psi89%3865 fps99.8%
IMR 4227<<locked>>84%49,908 psi88%3816 fps100%
Lovex S053<<locked>>84%48,066 psi85%3753 fps100%
Norma 200<<locked>>90%48,530 psi86%3839 fps99.5%
ReloadSwiss RS 14ᴾ<<locked>>100%30,603 psi54%2657 fps100%
ReloadSwiss RS 36<<locked>>84%50,096 psi89%3835 fps100%
Rottweil R 901ᴾ<<locked>>100%50,299 psi89%3845 fps96.1%
SNPE Vectan BA6 1/2<<locked>>88%48,863 psi86%3589 fps100%
SNPE Vectan SP 10<<locked>>92%50,952 psi90%3881 fps96.4%
SNPE Vectan SP 3<<locked>>94%49,748 psi88%3871 fps98%
SNPE Vectan Tubal 3000ᴾ<<locked>>100%49,966 psi88%3760 fps96.1%
Somchem S335ᴾ<<locked>>100%48,675 psi86%3747 fps97%
Vihtavuori N120<<locked>>90%50,879 psi90%3829 fps100%
Vihtavuori N130<<locked>>96%49,501 psi88%3789 fps99.2%
Vihtavuori N133ᴾ<<locked>>100%48,979 psi87%3766 fps98.5%
Vihtavuori N135ᴾ<<locked>>100%40,654 psi72%3675 fps97%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%41,684 psi74%3583 fps97.9%
Accurate 2015<<locked>>90%36,695 psi65%3527 fps95.3%
Accurate 2460<<locked>>94%47,500 psi84%3773 fps95.4%
Accurate 2495<<locked>>98%36,666 psi65%3573 fps96%
Accurate LT-30<<locked>>86%42,496 psi75%3593 fps95.5%
ADI AR 2207<<locked>>80%36,085 psi64%3563 fps99.2%
ADI AR 2219<<locked>>88%43,192 psi76%3737 fps95.5%
Alliant AR-Comp<<locked>>88%31,372 psi55%3455 fps95.9%
Alliant Reloder-10x27.6 gr84%34,577 psi61%3517 fps95.7%
Alliant Reloder-7<<locked>>80%37,681 psi67%3547 fps97.2%
Baschieri & Pellagri 106<<locked>>86%41,524 psi73%3547 fps95.8%
Hodgdon H32231.3 gr90%41,916 psi74%3707 fps95.1%
Hodgdon H335<<locked>>92%46,499 psi82%3783 fps95.4%
Hodgdon H4198<<locked>>84%44,280 psi78%3668 fps95.2%
Hodgdon TrailBoss<<locked>>80%22,408 psi40%2349 fps100%
IMR 3031<<locked>>96%39,523 psi70%3698 fps95.3%
IMR 4198<<locked>>80%32,155 psi57%3412 fps95.6%
IMR 4227<<locked>>80%43,714 psi77%3684 fps99.6%
Lovex S053<<locked>>80%42,656 psi75%3645 fps100%
Norma 200<<locked>>80%34,345 psi61%3491 fps96.4%
ReloadSwiss RS 14<<locked>>80%22,162 psi39%2398 fps100%
ReloadSwiss RS 36<<locked>>80%43,584 psi77%3704 fps99.6%
Rottweil R 901<<locked>>98%46,978 psi83%3776 fps95.2%
SNPE Vectan BA6 1/2<<locked>>80%39,262 psi69%3415 fps100%
SNPE Vectan SP 10<<locked>>90%47,543 psi84%3809 fps95.6%
SNPE Vectan SP 329 gr88%40,480 psi72%3661 fps95.5%
SNPE Vectan Tubal 3000<<locked>>98%47,007 psi83%3701 fps95.3%
Somchem S335<<locked>>96%42,482 psi75%3612 fps95.3%
Vihtavuori N120<<locked>>80%36,230 psi64%3524 fps99.8%
Vihtavuori N130<<locked>>84%33,518 psi59%3406 fps95%
Vihtavuori N133<<locked>>92%37,681 psi67%3510 fps95.5%
Vihtavuori N135<<locked>>96%35,447 psi63%3533 fps95.2%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 32 powders for .225 Win. loaded with the .224 | 35gr | Inceptor SRR. Alliant AR-Comp delivers the highest muzzle velocity at 3,901 fps; across all powders the maximum-charge window runs from 2,595 fps to 3,901 fps. Accurate 2495 gives the best case fill at 100 %, and 32 of the 32 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (390 MPa), the top charges use 54–90 %, leaving at least 10 % headroom. The 35.0 gr projectile in 0.224" calls for a 1:9.5 twist; slower twists will usually not stabilise this weight. Accurate 2495, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, Alliant Reloder-10x, SNPE Vectan SP 3 rank at the top here: for .225 Win. with the .224 | 35gr | Inceptor SRR they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data