top of page

Load data for .223 Rem. + .224 | 55gr | CutEdge MTH

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s): ADI AR 2207, Alliant Reloder-10x, Alliant Reloder-7, IMR 4198, Norma 200

.223 Rem. + .224 | 55gr | CutEdge MTH

Load Specifications

Bullet:
.224 | 55gr | CutEdge MTH
Manufacturer SKU:
MTH B55
Bullet Weight:
55gr | 3.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.869" | 22.1mm
Caliber:
.223 Rem.
Case Length (l3):
1.759" | 44.7mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.402" | 10.2mm
Shank Seated Depth:
0.267" | 6.8mm
Case Capacity:
28.8 Grains of Water | 1.87 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
55114 psi | 3800 bar
LID:
LID_B8404_C135

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 74 loads in caliber .223 Rem. with .224 | 55gr | CutEdge MTH bullet and 37 powders such as ADI AR 2207, Alliant Reloder-10x, Alliant Reloder-7, IMR 4198, Norma 200. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
92%
47761
87%
**61
100%
ADI AR 2219
<<locked>>
95%
47921
87%
**04
97%
Accurate 1680
<<locked>>
83%
47297
86%
**02
98%
Accurate 2015
<<locked>>
96%
40712
74%
**36
98%
[Accurate 2460]*
<<locked>>
97%
44309
80%
**95
93%
[Accurate 2495]*
<<locked>>
96%
31169
57%
**15
94%
Alliant AR-Comp
<<locked>>
96%
35520
64%
**90
98%
Alliant Reloder-10x 👍
<<locked>>
96%
44918
82%
**41
99%
Alliant Reloder-7 👍
<<locked>>
92%
49240
89%
**48
100%
Baschieri & Pellagri 106
<<locked>>
94%
48124
87%
**79
98%
[Hodgdon Benchmark]*
<<locked>>
96%
41452
75%
**77
92%
[Hodgdon CFE BLK]*
<<locked>>
91%
49443
90%
**86
93%
Hodgdon H322
<<locked>>
96%
40973
74%
**59
95%
Hodgdon H335
<<locked>>
96%
48196
87%
**94
96%
Hodgdon H4198
<<locked>>
93%
48559
88%
**92
97%
Hodgdon TrailBoss
<<locked>>
93%
27717
50%
**47
100%
[IMR 3031]*
<<locked>>
97%
31111
56%
**72
92%
IMR 4198 👍
<<locked>>
96%
47398
86%
**35
100%
IMR 4227
<<locked>>
87%
49545
90%
**09
100%
[Lovex D073.4]*
<<locked>>
96%
45861
83%
**05
93%
[Lovex D073.5]*
<<locked>>
96%
42351
77%
**53
92%
Lovex S053
<<locked>>
87%
48269
88%
**66
100%
Norma 200 👍
<<locked>>
95%
48791
89%
**91
100%
ReloadSwiss RS 14
<<locked>>
93%
27369
50%
**90
100%
ReloadSwiss RS 36
<<locked>>
87%
48327
88%
**28
100%
[ReloadSwiss RS 40]*
<<locked>>
96%
43656
79%
**82
93%
[Rottweil R 901]*
<<locked>>
96%
37956
69%
**67
93%
SNPE Vectan BA6 1/2
<<locked>>
90%
48124
87%
**12
100%
SNPE Vectan SP 10
<<locked>>
96%
49501
90%
**20
96%
[SNPE Vectan Tubal 3000]*
<<locked>>
97%
39059
71%
**15
93%
[Shooters World Tactical Rifle]*
<<locked>>
96%
48660
88%
**05
92%
[Somchem S321]*
<<locked>>
97%
42482
77%
**76
92%
[Somchem S335]*
<<locked>>
96%
36608
66%
**92
94%
Vihtavuori N120
<<locked>>
96%
49559
90%
**31
100%
Vihtavuori N130
<<locked>>
97%
42598
77%
**27
98%
Vihtavuori N133
<<locked>>
96%
34040
62%
**40
95%
[Winchester 748]*
<<locked>>
97%
41814
76%
**76
92%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
32895
60%
**69
99%
[ADI AR 2219]*
<<locked>>
81%
29486
53%
**67
90%
Accurate 1680
<<locked>>
81%
43395
79%
**27
97%
[Accurate 2015]*
<<locked>>
81%
24178
44%
**07
91%
[Accurate 2460]*
<<locked>>
92%
36811
67%
**38
90%
[Accurate 2495]*
<<locked>>
90%
24149
44%
**05
90%
[Alliant AR-Comp]*
<<locked>>
82%
22727
41%
**80
91%
[Alliant Reloder-10x]*
<<locked>>
81%
26948
49%
**08
93%
Alliant Reloder-7
<<locked>>
81%
34708
63%
**59
97%
[Baschieri & Pellagri 106]*
<<locked>>
81%
30327
55%
**95
92%
[Hodgdon Benchmark]*
<<locked>>
93%
38145
69%
**08
90%
[Hodgdon CFE BLK]*
<<locked>>
86%
41727
76%
**35
91%
[Hodgdon H322]*
<<locked>>
87%
30081
55%
**84
90%
[Hodgdon H335]*
<<locked>>
85%
32430
59%
**43
90%
[Hodgdon H4198]*
<<locked>>
81%
34026
62%
**84
92%
Hodgdon TrailBoss
<<locked>>
81%
22800
41%
**26
100%
[IMR 3031]*
<<locked>>
94%
28398
52%
**80
90%
IMR 4198
<<locked>>
81%
30284
55%
**48
96%
IMR 4227
<<locked>>
81%
41336
75%
**58
100%
[Lovex D073.4]*
<<locked>>
91%
37985
69%
**48
91%
[Lovex D073.5]*
<<locked>>
92%
36811
67%
**38
90%
Lovex S053
<<locked>>
81%
40306
73%
**28
100%
Norma 200
<<locked>>
81%
31096
56%
**13
96%
ReloadSwiss RS 14
<<locked>>
82%
22655
41%
**68
100%
ReloadSwiss RS 36
<<locked>>
81%
40466
73%
**81
100%
[ReloadSwiss RS 40]*
<<locked>>
89%
34882
63%
**92
90%
[Rottweil R 901]*
<<locked>>
91%
31850
58%
**10
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
36782
67%
**21
100%
[SNPE Vectan SP 10]*
<<locked>>
83%
31836
58%
**33
90%
[SNPE Vectan Tubal 3000]*
<<locked>>
91%
32329
59%
**61
90%
[Shooters World Tactical Rifle]*
<<locked>>
92%
42438
77%
**97
90%
[Somchem S321]*
<<locked>>
94%
38943
71%
**97
90%
[Somchem S335]*
<<locked>>
90%
29486
54%
**15
90%
Vihtavuori N120
<<locked>>
81%
31212
57%
**84
100%
[Vihtavuori N130]*
<<locked>>
81%
25889
47%
**16
92%
[Vihtavuori N133]*
<<locked>>
87%
26078
47%
**16
91%
[Winchester 748]*
<<locked>>
94%
38493
70%
**97
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page