
Load Specifications
Load data in caliber .223 Rem. with .224 | 55gr | CutEdge MTAC bullet and 35 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon H322, SNPE Vectan SP 3 and ADI AR 2219.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 86% | 47,805 psi | 87% | 3015 fps | 99.6% |
| Accurate 2015ᴾ | <<locked>> | 100% | 46,325 psi | 84% | 3071 fps | 98.9% |
| Accurate 2460 | <<locked>> | 98% | 48,704 psi | 89% | 3123 fps | 96.8% |
| Accurate 2495ᴾ | <<locked>> | 100% | 33,881 psi | 62% | 2887 fps | 96.6% |
| Accurate LT-30 | <<locked>> | 92% | 48,385 psi | 88% | 3015 fps | 98% |
| Accurate LT-32 | <<locked>> | 92% | 48,878 psi | 89% | 3022 fps | 96.1% |
| ADI AR 2207 | <<locked>> | 90% | 47,036 psi | 86% | 3084 fps | 100% |
| ADI AR 2219 | <<locked>> | 94% | 49,037 psi | 89% | 3163 fps | 98% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 43,076 psi | 78% | 3107 fps | 99.9% |
| Alliant Reloder-10x | <<locked>> | 96% | 47,427 psi | 86% | 3123 fps | 99.6% |
| Alliant Reloder-7 | <<locked>> | 90% | 48,921 psi | 89% | 3084 fps | 99.9% |
| Baschieri & Pellagri 106 | <<locked>> | 92% | 46,456 psi | 84% | 2989 fps | 98% |
| Hodgdon H322 | <<locked>> | 96% | 47,065 psi | 86% | 3127 fps | 97.6% |
| Hodgdon H335 | <<locked>> | 96% | 48,109 psi | 87% | 3140 fps | 96.9% |
| Hodgdon H4198 | <<locked>> | 88% | 46,905 psi | 85% | 3012 fps | 97.1% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 31,009 psi | 56% | 1952 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 41,002 psi | 75% | 3068 fps | 97.1% |
| IMR 4198 | <<locked>> | 96% | 49,516 psi | 90% | 3114 fps | 100% |
| IMR 4227 | <<locked>> | 84% | 47,137 psi | 86% | 3009 fps | 100% |
| Lovex D073.4 | <<locked>> | 92% | 49,516 psi | 90% | 3146 fps | 96.2% |
| Lovex S053 | <<locked>> | 86% | 48,791 psi | 89% | 3009 fps | 100% |
| Norma 200 | <<locked>> | 92% | 46,992 psi | 85% | 3097 fps | 99.8% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 30,342 psi | 55% | 1988 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 84% | 46,760 psi | 85% | 3038 fps | 100% |
| Rottweil R 901ᴾ | <<locked>> | 100% | 45,643 psi | 83% | 3068 fps | 96.1% |
| Shooters World AR Plus | <<locked>> | 92% | 49,516 psi | 90% | 3146 fps | 96.2% |
| SNPE Vectan BA6 1/2 | <<locked>> | 88% | 47,253 psi | 86% | 2825 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 94% | 49,342 psi | 90% | 3159 fps | 97.1% |
| SNPE Vectan SP 3 | <<locked>> | 96% | 48,341 psi | 88% | 3123 fps | 98.6% |
| SNPE Vectan Tubal 3000ᴾ | <<locked>> | 100% | 45,339 psi | 82% | 2986 fps | 96% |
| Somchem S335ᴾ | <<locked>> | 100% | 43,453 psi | 79% | 2976 fps | 96.7% |
| Vihtavuori N120 | <<locked>> | 90% | 47,224 psi | 86% | 3035 fps | 100% |
| Vihtavuori N130 | <<locked>> | 98% | 48,486 psi | 88% | 3068 fps | 99.6% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 44,309 psi | 81% | 2995 fps | 98.4% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 36,260 psi | 66% | 2920 fps | 96.9% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 38,624 psi | 70% | 2838 fps | 98.2% |
| Accurate 2015 | <<locked>> | 90% | 33,547 psi | 61% | 2805 fps | 95.8% |
| Accurate 2460 | <<locked>> | 94% | 42,337 psi | 77% | 3002 fps | 95.2% |
| Accurate 2495 | <<locked>> | 98% | 31,879 psi | 58% | 2841 fps | 95.8% |
| Accurate LT-30 | <<locked>> | 84% | 37,623 psi | 68% | 2802 fps | 95.3% |
| Accurate LT-32 | <<locked>> | 90% | 45,774 psi | 83% | 2966 fps | 95.4% |
| ADI AR 2207 | <<locked>> | 80% | 34,011 psi | 62% | 2825 fps | 99.7% |
| ADI AR 2219 | 22.3 gr | 88% | 39,450 psi | 72% | 2972 fps | 95.6% |
| Alliant AR-Comp | <<locked>> | 86% | 26,992 psi | 49% | 2687 fps | 95.5% |
| Alliant Reloder-10x | <<locked>> | 82% | 29,892 psi | 54% | 2730 fps | 95.6% |
| Alliant Reloder-7 | <<locked>> | 80% | 35,375 psi | 64% | 2812 fps | 97.9% |
| Baschieri & Pellagri 106 | <<locked>> | 84% | 35,650 psi | 65% | 2769 fps | 95.1% |
| Hodgdon H322 | 22.1 gr | 90% | 38,406 psi | 70% | 2949 fps | 95.3% |
| Hodgdon H335 | <<locked>> | 92% | 42,119 psi | 77% | 3022 fps | 95.3% |
| Hodgdon H4198 | <<locked>> | 82% | 38,914 psi | 71% | 2848 fps | 95% |
| Hodgdon TrailBoss | <<locked>> | 80% | 22,423 psi | 41% | 1745 fps | 100% |
| IMR 3031 | <<locked>> | 96% | 35,766 psi | 65% | 2946 fps | 95.4% |
| IMR 4198 | <<locked>> | 80% | 30,414 psi | 55% | 2694 fps | 96.7% |
| IMR 4227 | <<locked>> | 80% | 41,582 psi | 76% | 2907 fps | 99.9% |
| Lovex D073.4 | <<locked>> | 90% | 46,064 psi | 84% | 3084 fps | 95.3% |
| Lovex S053 | <<locked>> | 80% | 40,335 psi | 73% | 2864 fps | 100% |
| Norma 200 | <<locked>> | 80% | 31,531 psi | 57% | 2762 fps | 97.1% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 22,466 psi | 41% | 1795 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 40,857 psi | 74% | 2927 fps | 99.8% |
| Rottweil R 901 | <<locked>> | 98% | 42,714 psi | 78% | 3009 fps | 95.3% |
| Shooters World AR Plus | <<locked>> | 90% | 46,064 psi | 84% | 3084 fps | 95.3% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 37,434 psi | 68% | 2664 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 90% | 42,612 psi | 77% | 3031 fps | 95.4% |
| SNPE Vectan SP 3 | 20 gr | 86% | 35,186 psi | 64% | 2848 fps | 95.3% |
| SNPE Vectan Tubal 3000 | <<locked>> | 98% | 42,873 psi | 78% | 2940 fps | 95.4% |
| Somchem S335 | <<locked>> | 96% | 38,609 psi | 70% | 2877 fps | 95.3% |
| Vihtavuori N120 | <<locked>> | 80% | 34,272 psi | 62% | 2792 fps | 100% |
| Vihtavuori N130 | <<locked>> | 82% | 29,283 psi | 53% | 2648 fps | 95% |
| Vihtavuori N133 | <<locked>> | 90% | 32,503 psi | 59% | 2736 fps | 95.1% |
| Vihtavuori N135 | <<locked>> | 96% | 32,039 psi | 58% | 2812 fps | 95.4% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 35 powders for .223 Rem. loaded with the .224 | 55gr | CutEdge MTAC. ADI AR 2219 delivers the highest muzzle velocity at 3,163 fps; across all powders the maximum-charge window runs from 1,952 fps to 3,163 fps. Accurate 2015 gives the best case fill at 100 %, and 35 of the 35 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (379 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. The 55.0 gr projectile in 0.224" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon H322, SNPE Vectan SP 3, ADI AR 2219 rank at the top here: for .223 Rem. with the .224 | 55gr | CutEdge MTAC they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.