Load data for 5.56 x 45 NATO + .224 | 45gr | CutEdge ER Raptor

5.56 x 45 NATO cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:45 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.759"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:30 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:20"
Max. allowed Pressure:62,366 psi
Recommended Twist Rate:1:9.0

Load data in caliber 5.56 x 45 NATO with .224 | 45gr | CutEdge ER Raptor bullet and 26 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 36, Alliant Reloder-7 and ADI AR 2207.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 20"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>94%54,157 psi87%3248 fps98.4%
Accurate 5744<<locked>>82%56,130 psi90%3360 fps99.2%
Accurate LT-30ᴾ<<locked>>100%54,172 psi87%3235 fps95.9%
Accurate No. 11 FS<<locked>>82%52,112 psi84%3228 fps100%
ADI APS 450<<locked>>82%55,201 psi89%2589 fps100%
ADI AR 2205<<locked>>86%52,924 psi85%3159 fps100%
ADI AR 2207ᴾ<<locked>>100%54,853 psi88%3369 fps100%
Alliant Reloder-10xᴾ<<locked>>100%45,078 psi72%3209 fps96.8%
Alliant Reloder-7<<locked>>98%54,099 psi87%3310 fps98.8%
Baschieri & Pellagri 106ᴾ<<locked>>100%52,924 psi85%3212 fps96.1%
Hodgdon TrailBossᴾ<<locked>>100%29,689 psi48%2070 fps100%
IMR 4198ᴾ<<locked>>100%48,225 psi77%3228 fps98.3%
IMR 4227<<locked>>94%56,333 psi90%3317 fps99.9%
Lovex D060<<locked>>86%53,287 psi85%3307 fps98.8%
Lovex D063<<locked>>82%53,635 psi86%3281 fps99%
Lovex S053<<locked>>94%53,911 psi86%3261 fps100%
Norma 200ᴾ<<locked>>100%51,851 psi83%3320 fps98.8%
ReloadSwiss RS 14ᴾ<<locked>>100%28,848 psi46%2106 fps100%
ReloadSwiss RS 36<<locked>>94%55,492 psi89%3333 fps99.8%
Shooters World Blackout<<locked>>82%53,635 psi86%3281 fps99%
Shooters World Buffalo Rifle<<locked>>86%53,287 psi85%3307 fps98.8%
Shooters World SOCOM<<locked>>86%54,969 psi88%3271 fps99.4%
SNPE Vectan BA6 1/2<<locked>>98%54,027 psi87%3107 fps100%
Vihtavuori N110<<locked>>90%56,057 psi90%3232 fps100%
Vihtavuori N120ᴾ<<locked>>100%54,926 psi88%3320 fps100%
Vihtavuori N130ᴾ<<locked>>100%44,092 psi71%3110 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 20"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%41,292 psi66%3009 fps95.6%
Accurate 5744<<locked>>80%52,562 psi84%3297 fps98.7%
Accurate LT-30<<locked>>98%50,633 psi81%3176 fps95.1%
Accurate No. 11 FS<<locked>>80%48,733 psi78%3169 fps99.9%
ADI APS 450<<locked>>80%52,939 psi85%2552 fps100%
ADI AR 2205<<locked>>80%43,859 psi70%3005 fps100%
ADI AR 220718.3 gr80%28,442 psi46%2792 fps95.1%
Alliant Reloder-10x<<locked>>96%39,697 psi64%3091 fps95.3%
Alliant Reloder-720.9 gr88%39,581 psi63%3028 fps95.8%
Baschieri & Pellagri 106<<locked>>98%48,994 psi79%3143 fps95.2%
Hodgdon TrailBoss<<locked>>80%21,335 psi34%1850 fps100%
IMR 4198<<locked>>92%37,884 psi61%3002 fps95.6%
IMR 4227<<locked>>80%35,998 psi58%2913 fps96.7%
Lovex D060<<locked>>80%44,193 psi71%3127 fps97.1%
Lovex D063<<locked>>80%50,125 psi80%3219 fps98.5%
Lovex S053<<locked>>80%35,273 psi57%2900 fps99.1%
Norma 200<<locked>>90%37,101 psi59%3018 fps95.3%
ReloadSwiss RS 14<<locked>>80%20,784 psi33%1886 fps100%
ReloadSwiss RS 3619.1 gr80%35,433 psi57%2933 fps96.3%
Shooters World Blackout<<locked>>80%50,125 psi80%3219 fps98.5%
Shooters World Buffalo Rifle<<locked>>80%44,193 psi71%3127 fps97.1%
Shooters World SOCOM<<locked>>80%44,875 psi72%3091 fps98.1%
SNPE Vectan BA6 1/2<<locked>>80%33,011 psi53%2743 fps100%
Vihtavuori N110<<locked>>80%41,408 psi66%2995 fps100%
Vihtavuori N120<<locked>>80%28,732 psi46%2776 fps96.7%
Vihtavuori N130<<locked>>98%41,191 psi66%3048 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 26 powders for 5.56 x 45 NATO loaded with the .224 | 45gr | CutEdge ER Raptor. ADI AR 2207 delivers the highest muzzle velocity at 3,369 fps; across all powders the maximum-charge window runs from 2,070 fps to 3,369 fps. Accurate LT-30 gives the best case fill at 100 %, and 26 of the 26 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (430 MPa), the top charges use 46–90 %, leaving at least 10 % headroom. The 45.0 gr projectile in 0.224" calls for a 1:9.0 twist; slower twists will usually not stabilise this weight. Accurate LT-30, ADI AR 2207, Alliant Reloder-10x reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 36, Alliant Reloder-7, ADI AR 2207 rank at the top here: for 5.56 x 45 NATO with the .224 | 45gr | CutEdge ER Raptor they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data