Load data for .222 Rem. + .224 | 55gr | CutEdge MTAC

.222 Rem. cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:55 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.7"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:27.9 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:53,664 psi
Recommended Twist Rate:1:10.0

Load data in caliber .222 Rem. with .224 | 55gr | CutEdge MTAC bullet and 23 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Norma 200, ADI AR 2207 and ReloadSwiss RS 36.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>88%45,368 psi85%2913 fps98.7%
Accurate 2015ᴾ<<locked>>100%40,306 psi75%2907 fps96.8%
Accurate LT-30<<locked>>94%45,905 psi86%2910 fps96.4%
ADI AR 2205<<locked>>82%48,501 psi90%2874 fps100%
ADI AR 2207<<locked>>94%46,572 psi87%3031 fps100%
ADI AR 2219<<locked>>96%45,730 psi85%3038 fps96.1%
Alliant AR-Compᴾ<<locked>>100%37,376 psi70%2923 fps98.4%
Alliant Reloder-10xᴾ<<locked>>100%46,978 psi88%3064 fps99.1%
Alliant Reloder-7<<locked>>92%46,311 psi86%2986 fps99.2%
Baschieri & Pellagri 106<<locked>>96%46,934 psi87%2940 fps97%
Hodgdon H4198<<locked>>94%47,268 psi88%2953 fps96%
Hodgdon TrailBossᴾ<<locked>>100%29,863 psi56%1880 fps100%
IMR 4198<<locked>>98%46,369 psi86%3002 fps99.5%
IMR 4227<<locked>>88%47,921 psi89%2969 fps100%
Lovex S053<<locked>>88%46,586 psi87%2930 fps100%
Norma 200<<locked>>96%46,978 psi88%3048 fps99.5%
ReloadSwiss RS 14ᴾ<<locked>>100%29,747 psi55%1932 fps100%
ReloadSwiss RS 36<<locked>>88%47,050 psi88%2992 fps99.9%
SNPE Vectan BA6 1/2<<locked>>92%47,413 psi88%2785 fps100%
SNPE Vectan SP 3ᴾ<<locked>>100%48,167 psi90%3061 fps97.7%
Vihtavuori N110<<locked>>82%45,774 psi85%2854 fps100%
Vihtavuori N120<<locked>>96%46,282 psi86%2976 fps100%
Vihtavuori N130ᴾ<<locked>>100%44,324 psi83%2943 fps98.4%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%34,737 psi65%2697 fps96.2%
Accurate 2015<<locked>>96%35,027 psi65%2795 fps95.2%
Accurate LT-30<<locked>>90%40,814 psi76%2812 fps95%
ADI AR 2205<<locked>>80%45,034 psi84%2818 fps100%
ADI AR 220716.5 gr80%29,994 psi56%2680 fps98.4%
ADI AR 2219<<locked>>94%43,018 psi80%2986 fps95.4%
Alliant AR-Comp<<locked>>92%28,979 psi54%2694 fps95.1%
Alliant Reloder-10x<<locked>>88%31,923 psi59%2743 fps95.4%
Alliant Reloder-7<<locked>>80%31,314 psi58%2661 fps95.7%
Baschieri & Pellagri 106<<locked>>92%41,379 psi77%2835 fps95.7%
Hodgdon H4198<<locked>>92%44,570 psi83%2904 fps95.4%
Hodgdon TrailBoss<<locked>>80%21,625 psi40%1683 fps100%
IMR 4198<<locked>>82%29,225 psi54%2605 fps95%
IMR 4227<<locked>>80%37,376 psi70%2766 fps99%
Lovex S053<<locked>>80%36,521 psi68%2743 fps100%
Norma 20017.7 gr82%29,660 psi55%2671 fps95.4%
ReloadSwiss RS 14<<locked>>80%21,190 psi39%1719 fps100%
ReloadSwiss RS 3617.1 gr80%36,419 psi68%2782 fps98.7%
SNPE Vectan BA6 1/2<<locked>>80%34,418 psi64%2569 fps100%
SNPE Vectan SP 3<<locked>>94%40,190 psi75%2907 fps95.7%
Vihtavuori N110<<locked>>80%42,931 psi80%2805 fps100%
Vihtavuori N120<<locked>>80%28,094 psi52%2595 fps98.8%
Vihtavuori N130<<locked>>90%32,242 psi60%2684 fps95.1%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 23 powders for .222 Rem. loaded with the .224 | 55gr | CutEdge MTAC. Alliant Reloder-10x delivers the highest muzzle velocity at 3,064 fps; across all powders the maximum-charge window runs from 1,880 fps to 3,064 fps. Accurate 2015 gives the best case fill at 100 %, and 23 of the 23 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (370 MPa), the top charges use 55–90 %, leaving at least 10 % headroom. The 55.0 gr projectile in 0.224" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Alliant AR-Comp, Alliant Reloder-10x reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Norma 200, ADI AR 2207, ReloadSwiss RS 36 rank at the top here: for .222 Rem. with the .224 | 55gr | CutEdge MTAC they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data