
Load Specifications
Load data in caliber .222 Rem. with .224 | 45gr | CutEdge ER Raptor bullet and 21 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 36, Alliant Reloder-7 and IMR 4227.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 94% | 48,080 psi | 90% | 3205 fps | 97.3% |
| Accurate 5744 | <<locked>> | 84% | 48,399 psi | 90% | 3273 fps | 98.1% |
| Accurate No. 11 FS | <<locked>> | 82% | 47,224 psi | 88% | 3205 fps | 99.8% |
| ADI AR 2205 | <<locked>> | 84% | 45,440 psi | 85% | 3088 fps | 100% |
| ADI AR 2207 | <<locked>> | 98% | 44,976 psi | 84% | 3277 fps | 99.6% |
| Alliant Reloder-7 | <<locked>> | 98% | 47,834 psi | 89% | 3266 fps | 97.9% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 28,427 psi | 53% | 2053 fps | 100% |
| IMR 4198ᴾ | <<locked>> | 100% | 43,584 psi | 81% | 3183 fps | 97.2% |
| IMR 4227 | <<locked>> | 92% | 47,674 psi | 89% | 3226 fps | 99.2% |
| Lovex D060 | <<locked>> | 86% | 48,399 psi | 90% | 3273 fps | 98.1% |
| Lovex D063 | <<locked>> | 84% | 45,876 psi | 85% | 3169 fps | 98.3% |
| Lovex S053 | <<locked>> | 94% | 48,124 psi | 90% | 3232 fps | 100% |
| Norma 200ᴾ | <<locked>> | 100% | 45,426 psi | 85% | 3267 fps | 97.7% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 28,514 psi | 53% | 2105 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 92% | 46,760 psi | 87% | 3249 fps | 99% |
| Shooters World Blackout | <<locked>> | 82% | 48,269 psi | 90% | 3241 fps | 98.2% |
| Shooters World Buffalo Rifle | <<locked>> | 86% | 48,399 psi | 90% | 3273 fps | 98.1% |
| Shooters World SOCOM | <<locked>> | 84% | 45,876 psi | 85% | 3169 fps | 98.3% |
| SNPE Vectan BA6 1/2 | <<locked>> | 96% | 46,572 psi | 87% | 3054 fps | 100% |
| Vihtavuori N110 | <<locked>> | 88% | 47,993 psi | 89% | 3181 fps | 100% |
| Vihtavuori N120ᴾ | <<locked>> | 100% | 45,484 psi | 85% | 3221 fps | 99.9% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 88% | 39,639 psi | 74% | 3035 fps | 95.2% |
| Accurate 5744 | <<locked>> | 80% | 43,004 psi | 80% | 3161 fps | 96.9% |
| Accurate No. 11 FS | <<locked>> | 80% | 43,787 psi | 82% | 3140 fps | 99.5% |
| ADI AR 2205 | <<locked>> | 80% | 40,364 psi | 75% | 2989 fps | 99.8% |
| ADI AR 2207 | <<locked>> | 84% | 28,500 psi | 53% | 2879 fps | 95.7% |
| Alliant Reloder-7 | 19.2 gr | 90% | 37,101 psi | 69% | 3041 fps | 95.2% |
| Hodgdon TrailBoss | <<locked>> | 80% | 20,349 psi | 38% | 1837 fps | 100% |
| IMR 4198 | <<locked>> | 94% | 36,114 psi | 67% | 3020 fps | 95.1% |
| IMR 4227 | 16.2 gr | 80% | 32,822 psi | 61% | 2896 fps | 95.8% |
| Lovex D060 | <<locked>> | 80% | 40,509 psi | 75% | 3103 fps | 96.3% |
| Lovex D063 | <<locked>> | 80% | 40,089 psi | 75% | 3051 fps | 97.1% |
| Lovex S053 | <<locked>> | 80% | 31,372 psi | 58% | 2871 fps | 98.5% |
| Norma 200 | <<locked>> | 94% | 36,608 psi | 68% | 3091 fps | 95.6% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 20,262 psi | 38% | 1890 fps | 100% |
| ReloadSwiss RS 36 | 17.2 gr | 80% | 31,502 psi | 59% | 2900 fps | 95.1% |
| Shooters World Blackout | <<locked>> | 80% | 44,788 psi | 83% | 3176 fps | 97.6% |
| Shooters World Buffalo Rifle | <<locked>> | 80% | 40,509 psi | 75% | 3103 fps | 96.3% |
| Shooters World SOCOM | <<locked>> | 80% | 40,089 psi | 75% | 3051 fps | 97.1% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 29,820 psi | 56% | 2727 fps | 100% |
| Vihtavuori N110 | <<locked>> | 80% | 37,623 psi | 70% | 2991 fps | 100% |
| Vihtavuori N120 | <<locked>> | 82% | 25,251 psi | 47% | 2733 fps | 95.4% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 21 powders for .222 Rem. loaded with the .224 | 45gr | CutEdge ER Raptor. ADI AR 2207 delivers the highest muzzle velocity at 3,277 fps; across all powders the maximum-charge window runs from 2,053 fps to 3,277 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 21 of the 21 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (370 MPa), the top charges use 53–90 %, leaving at least 10 % headroom. The 45.0 gr projectile in 0.224" calls for a 1:9.0 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, IMR 4198, Norma 200 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 36, Alliant Reloder-7, IMR 4227 rank at the top here: for .222 Rem. with the .224 | 45gr | CutEdge ER Raptor they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.