Load data for .222 Rem. + .224 | 35gr | Inceptor SRR

.222 Rem. cartridge drawing
Inceptor logo

Load Specifications

Bullet Manufacturer:Inceptor
Bullet Weight:35 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.7"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:27.9 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:53,664 psi
Recommended Twist Rate:1:9.5

Load data in caliber .222 Rem. with .224 | 35gr | Inceptor SRR bullet and 14 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 36, IMR 4227 and Vihtavuori N110.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate No. 11 FS<<locked>>86%47,210 psi88%3543 fps98.6%
ADI AR 2205<<locked>>88%45,818 psi85%3432 fps99.5%
ADI AR 2207ᴾ<<locked>>100%40,350 psi75%3514 fps97.2%
Hodgdon LilGun<<locked>>82%46,717 psi87%3615 fps100%
Hodgdon TrailBossᴾ<<locked>>100%26,498 psi49%2300 fps100%
IMR 4227<<locked>>96%46,514 psi87%3540 fps97.1%
Lovex S040<<locked>>82%46,847 psi87%3494 fps100%
Lovex S053<<locked>>98%46,543 psi87%3556 fps99.6%
ReloadSwiss RS 14ᴾ<<locked>>100%25,918 psi48%2356 fps100%
ReloadSwiss RS 36<<locked>>98%48,095 psi90%3609 fps97.4%
Shooters World SOCOM<<locked>>88%46,035 psi86%3494 fps96.1%
SNPE Vectan BA6 1/2ᴾ<<locked>>100%44,976 psi84%3392 fps100%
Vihtavuori N110<<locked>>92%46,456 psi87%3524 fps100%
Vihtavuori N120ᴾ<<locked>>100%40,770 psi76%3478 fps98.4%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate No. 11 FS<<locked>>80%37,768 psi70%3337 fps96.5%
ADI AR 2205<<locked>>80%35,694 psi67%3202 fps97.7%
ADI AR 2207<<locked>>96%35,708 psi67%3399 fps95.8%
Hodgdon LilGun<<locked>>80%43,903 psi82%3566 fps100%
Hodgdon TrailBoss<<locked>>80%19,116 psi36%2070 fps100%
IMR 422718.7 gr90%38,769 psi72%3366 fps95%
Lovex S040<<locked>>80%44,077 psi82%3442 fps100%
Lovex S053<<locked>>82%28,776 psi54%3107 fps95.1%
ReloadSwiss RS 14<<locked>>80%18,434 psi34%2110 fps100%
ReloadSwiss RS 3620.3 gr92%39,653 psi74%3425 fps95.2%
Shooters World SOCOM<<locked>>86%43,381 psi81%3435 fps95.3%
SNPE Vectan BA6 1/2<<locked>>80%25,541 psi48%2930 fps99.6%
Vihtavuori N11015.6 gr80%32,082 psi60%3205 fps99.8%
Vihtavuori N120<<locked>>92%31,618 psi59%3238 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 14 powders for .222 Rem. loaded with the .224 | 35gr | Inceptor SRR. Hodgdon LilGun delivers the highest muzzle velocity at 3,615 fps; across all powders the maximum-charge window runs from 2,300 fps to 3,615 fps. ADI AR 2207 gives the best case fill at 100 %, and 14 of the 14 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (370 MPa), the top charges use 48–90 %, leaving at least 10 % headroom. The 35.0 gr projectile in 0.224" calls for a 1:9.5 twist; slower twists will usually not stabilise this weight. ADI AR 2207, Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 36, IMR 4227, Vihtavuori N110 rank at the top here: for .222 Rem. with the .224 | 35gr | Inceptor SRR they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data