
Load Specifications
Load data in caliber .222 Rem. Mag. with .224 | 35gr | Inceptor SRR bullet and 21 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Shooters World Buffalo Rifle, Lovex D060 and ReloadSwiss RS 36.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 26"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 96% | 50,314 psi | 86% | 3668 fps | 97% |
| Accurate 5744 | <<locked>> | 82% | 49,835 psi | 85% | 3763 fps | 97.5% |
| Accurate No. 11 FS | <<locked>> | 86% | 52,359 psi | 89% | 3743 fps | 99.8% |
| ADI AR 2205 | <<locked>> | 88% | 50,198 psi | 85% | 3615 fps | 100% |
| ADI AR 2207ᴾ | <<locked>> | 100% | 45,890 psi | 78% | 3740 fps | 99.3% |
| Alliant Reloder-7ᴾ | <<locked>> | 100% | 49,777 psi | 85% | 3737 fps | 97.5% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 27,499 psi | 47% | 2398 fps | 100% |
| IMR 4227 | <<locked>> | 96% | 51,735 psi | 88% | 3753 fps | 99.1% |
| Lovex D060 | <<locked>> | 88% | 49,835 psi | 85% | 3763 fps | 97.5% |
| Lovex D063 | <<locked>> | 84% | 50,009 psi | 85% | 3720 fps | 97.7% |
| Lovex S040 | <<locked>> | 82% | 50,850 psi | 87% | 3658 fps | 100% |
| Lovex S053 | <<locked>> | 98% | 51,938 psi | 88% | 3753 fps | 100% |
| Norma 200ᴾ | <<locked>> | 100% | 42,743 psi | 73% | 3652 fps | 96.4% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 26,934 psi | 46% | 2454 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 96% | 50,749 psi | 86% | 3766 fps | 99% |
| Shooters World Blackout | <<locked>> | 84% | 50,009 psi | 85% | 3720 fps | 97.7% |
| Shooters World Buffalo Rifle | <<locked>> | 88% | 49,835 psi | 85% | 3763 fps | 97.5% |
| Shooters World SOCOM | <<locked>> | 88% | 51,184 psi | 87% | 3707 fps | 98.5% |
| SNPE Vectan BA6 1/2ᴾ | <<locked>> | 100% | 50,009 psi | 85% | 3553 fps | 100% |
| Vihtavuori N110 | <<locked>> | 92% | 51,764 psi | 88% | 3701 fps | 100% |
| Vihtavuori N120ᴾ | <<locked>> | 100% | 46,137 psi | 79% | 3691 fps | 99.8% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 26"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 92% | 43,961 psi | 75% | 3540 fps | 95.5% |
| Accurate 5744 | <<locked>> | 80% | 46,702 psi | 80% | 3698 fps | 96.9% |
| Accurate No. 11 FS | <<locked>> | 80% | 42,221 psi | 72% | 3543 fps | 98.8% |
| ADI AR 2205 | <<locked>> | 80% | 38,943 psi | 66% | 3386 fps | 99.3% |
| ADI AR 2207 | <<locked>> | 88% | 30,922 psi | 53% | 3363 fps | 95.6% |
| Alliant Reloder-7 | <<locked>> | 94% | 40,611 psi | 69% | 3543 fps | 95.3% |
| Hodgdon TrailBoss | <<locked>> | 80% | 20,131 psi | 34% | 2172 fps | 100% |
| IMR 4227 | <<locked>> | 84% | 35,592 psi | 61% | 3389 fps | 95.6% |
| Lovex D060 | 19.2 gr | 82% | 41,466 psi | 71% | 3570 fps | 95.5% |
| Lovex D063 | <<locked>> | 80% | 43,105 psi | 73% | 3576 fps | 96.2% |
| Lovex S040 | <<locked>> | 80% | 48,095 psi | 82% | 3612 fps | 100% |
| Lovex S053 | <<locked>> | 80% | 30,110 psi | 51% | 3248 fps | 97.2% |
| Norma 200 | <<locked>> | 98% | 39,856 psi | 68% | 3583 fps | 95.6% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 19,435 psi | 33% | 2211 fps | 100% |
| ReloadSwiss RS 36 | 20.5 gr | 84% | 34,316 psi | 58% | 3392 fps | 95.1% |
| Shooters World Blackout | <<locked>> | 80% | 43,105 psi | 73% | 3576 fps | 96.2% |
| Shooters World Buffalo Rifle | 19.2 gr | 82% | 41,466 psi | 71% | 3570 fps | 95.5% |
| Shooters World SOCOM | <<locked>> | 80% | 38,580 psi | 66% | 3438 fps | 95.6% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 28,456 psi | 48% | 3107 fps | 100% |
| Vihtavuori N110 | <<locked>> | 80% | 35,534 psi | 60% | 3383 fps | 100% |
| Vihtavuori N120 | <<locked>> | 84% | 27,688 psi | 47% | 3212 fps | 95.5% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 21 powders for .222 Rem. Mag. loaded with the .224 | 35gr | Inceptor SRR. ReloadSwiss RS 36 delivers the highest muzzle velocity at 3,766 fps; across all powders the maximum-charge window runs from 2,398 fps to 3,766 fps. ADI AR 2207 gives the best case fill at 100 %, and 21 of the 21 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (405 MPa), the top charges use 46–89 %, leaving at least 11 % headroom. The 35.0 gr projectile in 0.224" calls for a 1:9.5 twist; slower twists will usually not stabilise this weight. ADI AR 2207, Alliant Reloder-7, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Shooters World Buffalo Rifle, Lovex D060, ReloadSwiss RS 36 rank at the top here: for .222 Rem. Mag. with the .224 | 35gr | Inceptor SRR they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.