top of page

Load data for .221 Rem. Fireball + .224 | 40gr | CutEdge FBH

Recommended Powder(s): Vihtavuori N110

.221 Rem. Fireball + .224 | 40gr | CutEdge FBH

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 40gr | CutEdge FBH
Manufacturer SKU:
FBH B07
Bullet Weight:
40gr | 2.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.644" | 16.4mm
Caliber:
.221 Rem. Fireball load data
Case Length (l3):
1.397" | 35.5mm
Cartridge Length (C.O.L.):
1.803" | 45.8mm
Seated Depth:
0.238" | 6.1mm
Shank Seated Depth:
0.203" | 5.2mm
Case Capacity:
22.0 Grains of Water | 1.43 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B8401_C125
Last updated:
2025-01-01
Recommended Twist Rate:
1:12 - 1:10

Load data for 26 loads in caliber .221 Rem. Fireball with .224 | 40gr | CutEdge FBH bullet and 13 powders such as Vihtavuori N110. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • We recommend you limit powder range to relevant brands to speed up re-calculation of results

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

    .

    Loading_icon.gif

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
88%
41046
88%
**22
98%
[ADI AR 2207]*
<<locked>>
96%
30168
65%
**49
92%
Accurate No. 11 FS
<<locked>>
86%
40915
88%
**00
96%
Hodgdon TrailBoss
<<locked>>
96%
24308
52%
**91
100%
IMR 4227
<<locked>>
96%
41147
89%
**04
95%
[Lovex D063]*
<<locked>>
84%
40147
86%
**77
92%
Lovex S053
<<locked>>
96%
38711
83%
**84
98%
ReloadSwiss RS 14
<<locked>>
97%
23641
51%
**41
100%
[ReloadSwiss RS 36]*
<<locked>>
96%
39885
86%
**23
94%
SNPE Vectan BA6 1/2
<<locked>>
96%
35317
76%
**20
100%
[Shooters World Blackout]*
<<locked>>
84%
40147
86%
**77
92%
Vihtavuori N110 👍
<<locked>>
91%
40132
86%
**14
100%
[Vihtavuori N120]*
<<locked>>
96%
29008
63%
**64
93%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
32692
70%
**31
96%
[ADI AR 2207]*
<<locked>>
92%
27035
58%
**44
90%
[Accurate No. 11 FS]*
<<locked>>
81%
34389
74%
**53
94%
Hodgdon TrailBoss
<<locked>>
81%
18811
41%
**31
100%
[IMR 4227]*
<<locked>>
87%
30806
66%
**48
90%
[Lovex D063]*
<<locked>>
81%
35795
77%
**72
90%
[Lovex S053]*
<<locked>>
81%
24250
52%
**80
92%
ReloadSwiss RS 14
<<locked>>
82%
18463
40%
**77
100%
[ReloadSwiss RS 36]*
<<locked>>
89%
31908
69%
**27
91%
SNPE Vectan BA6 1/2
<<locked>>
81%
23351
50%
**98
99%
[Shooters World Blackout]*
<<locked>>
81%
35795
77%
**72
90%
Vihtavuori N110
<<locked>>
81%
29486
64%
**54
99%
[Vihtavuori N120]*
<<locked>>
91%
24555
53%
**13
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

<<locked>>... you need to buy an access license to unlock the data

bottom of page