top of page

Load data for .22 Nosler + .224 | 45gr | MEN SP

You need to be a member to bookmark a  load !

Bookmark this load
>> My bookmarks

Recommended Powder(s):

.22 Nosler + .224 | 45gr | MEN SP

Load Specifications

Bullet:
.224 | 45gr | MEN SP
Bullet Weight:
45gr | 2.9g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
1.000" | 25.4mm
Caliber:
.22 Nosler
Case Length (l3):
1.745" | 44.3mm
Cartridge Length (C.O.L.):
2.226" | 56.5mm
Seated Depth:
0.519" | 13.2mm
Shank Seated Depth:
0.519" | 13.2mm
Case Capacity:
35.0 Grains of Water | 2.27 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
55114 psi | 3800 bar
LID:
LID_B3769_C71

>> Use the Personalized Load Calculator further below to adjust input parameters. 

Load data for 64 loads in caliber .22 Nosler with .224 | 45gr | MEN SP bullet and 32 powder(s). The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

    • A load must fulfill certain criteria to be listed in the default view below - see here.

    • Our load data might deviate from other sources - see the most common reasons here

    • All loads are based on the bullet and case dimensions shown under "Load Specifications" - see here what to do if you deviate.

    • You can set your specifications in the "Personalized Load Calculator".

    • Go to the bottom of the "My Account " page to set the measure system (imperial vs. metric) 

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207 👍
<<locked>>
92%
48486
88%
**17
100%
ADI AR 2219
<<locked>>
95%
49371
90%
**56
96%
Accurate 1680
<<locked>>
83%
48776
89%
**61
97%
Accurate 2015
<<locked>>
96%
41872
76%
**66
97%
[Accurate 2460]*
<<locked>>
96%
45513
83%
**28
92%
[Accurate 2495]*
<<locked>>
97%
33997
62%
**64
94%
Alliant AR-Comp
<<locked>>
96%
37231
68%
**33
98%
Alliant Reloder-10x 👍
<<locked>>
96%
46383
84%
**97
99%
Alliant Reloder-7 👍
<<locked>>
90%
48515
88%
**74
99%
Baschieri & Pellagri 106
<<locked>>
94%
49501
90%
**19
97%
[Hodgdon CFE BLK]*
<<locked>>
90%
49240
89%
**96
92%
[Hodgdon H322]*
<<locked>>
96%
41597
75%
**83
94%
Hodgdon H335
<<locked>>
95%
47848
87%
**14
95%
Hodgdon H4198
<<locked>>
92%
48776
88%
**32
96%
Hodgdon TrailBoss
<<locked>>
95%
28805
52%
**78
100%
IMR 4198 👍
<<locked>>
96%
47877
87%
**78
99%
IMR 4227
<<locked>>
86%
48863
89%
**35
100%
[Lovex D073.4]*
<<locked>>
97%
48936
89%
**81
93%
[Lovex D073.5]*
<<locked>>
97%
45513
83%
**28
92%
Lovex S053
<<locked>>
87%
48936
89%
**22
100%
Norma 200 👍
<<locked>>
93%
48370
88%
**20
99%
ReloadSwiss RS 14
<<locked>>
95%
28311
51%
**24
100%
ReloadSwiss RS 36
<<locked>>
87%
49487
90%
**88
100%
[ReloadSwiss RS 40]*
<<locked>>
96%
45818
83%
**45
93%
[Rottweil R 901]*
<<locked>>
96%
39668
72%
**97
92%
SNPE Vectan BA6 1/2
<<locked>>
90%
49052
89%
**45
100%
SNPE Vectan SP 10
<<locked>>
95%
49052
89%
**40
95%
[SNPE Vectan Tubal 3000]*
<<locked>>
97%
40176
73%
**35
92%
[Somchem S335]*
<<locked>>
97%
38856
71%
**32
93%
Vihtavuori N120
<<locked>>
95%
48892
89%
**65
100%
Vihtavuori N130
<<locked>>
97%
44135
80%
**66
98%
[Vihtavuori N133]*
<<locked>>
97%
36390
66%
**82
94%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2207
<<locked>>
81%
34200
62%
**92
99%
[ADI AR 2219]*
<<locked>>
83%
32909
60%
**40
90%
Accurate 1680
<<locked>>
81%
45063
82%
**83
96%
[Accurate 2015]*
<<locked>>
82%
26498
48%
**20
90%
[Accurate 2460]*
<<locked>>
93%
40596
74%
**10
90%
[Accurate 2495]*
<<locked>>
91%
27499
50%
**64
91%
[Alliant AR-Comp]*
<<locked>>
84%
24685
45%
**00
91%
[Alliant Reloder-10x]*
<<locked>>
81%
28369
51%
**15
93%
Alliant Reloder-7
<<locked>>
81%
36347
66%
**92
97%
[Baschieri & Pellagri 106]*
<<locked>>
81%
31618
57%
**86
91%
[Hodgdon CFE BLK]*
<<locked>>
87%
44280
80%
**97
90%
[Hodgdon H322]*
<<locked>>
89%
33373
61%
**59
91%
[Hodgdon H335]*
<<locked>>
86%
35984
65%
**19
90%
[Hodgdon H4198]*
<<locked>>
81%
35070
64%
**97
91%
Hodgdon TrailBoss
<<locked>>
82%
23264
42%
**24
100%
IMR 4198
<<locked>>
81%
30690
56%
**31
95%
IMR 4227
<<locked>>
81%
42047
76%
**91
99%
[Lovex D073.4]*
<<locked>>
92%
40379
73%
**87
90%
[Lovex D073.5]*
<<locked>>
94%
40596
74%
**10
90%
Lovex S053
<<locked>>
81%
40785
74%
**55
100%
Norma 200
<<locked>>
81%
32082
58%
**17
95%
ReloadSwiss RS 14
<<locked>>
82%
23061
42%
**70
100%
ReloadSwiss RS 36
<<locked>>
81%
41017
74%
**14
99%
[ReloadSwiss RS 40]*
<<locked>>
92%
39610
72%
**97
91%
[Rottweil R 901]*
<<locked>>
93%
35694
65%
**92
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
37724
68%
**41
100%
[SNPE Vectan SP 10]*
<<locked>>
85%
35302
64%
**09
90%
[SNPE Vectan Tubal 3000]*
<<locked>>
93%
35810
65%
**30
91%
[Somchem S335]*
<<locked>>
91%
32343
59%
**51
90%
Vihtavuori N120
<<locked>>
81%
32256
59%
**94
99%
[Vihtavuori N130]*
<<locked>>
81%
27253
49%
**07
92%
[Vihtavuori N133]*
<<locked>>
88%
28181
51%
**33
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page