Load data for .22 Nosler + .224 | 45gr | MEN FMJ RN

.22 Nosler cartridge drawing
MEN logo

Load Specifications

Bullet Manufacturer:MEN
Bullet Weight:45 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.745"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:37 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:55,000 psi
Recommended Twist Rate:1:7.0

Load data in caliber .22 Nosler with .224 | 45gr | MEN FMJ RN bullet and 27 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ADI AR 2219, ADI AR 2207 and SNPE Vectan SP 3.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%48,776 psi89%3461 fps99.2%
Accurate 2015ᴾ<<locked>>100%48,414 psi88%3540 fps98.6%
Accurate 2495ᴾ<<locked>>100%36,332 psi66%3333 fps96.2%
Accurate LT-30<<locked>>92%49,458 psi90%3468 fps97.4%
ADI AR 2207<<locked>>90%48,457 psi88%3553 fps100%
ADI AR 2219<<locked>>92%47,137 psi86%3563 fps96.7%
Alliant AR-Compᴾ<<locked>>100%44,643 psi81%3570 fps99.7%
Alliant Reloder-10x<<locked>>96%48,979 psi89%3589 fps99.4%
Alliant Reloder-7<<locked>>88%47,529 psi86%3494 fps99.4%
Baschieri & Pellagri 106<<locked>>92%48,298 psi88%3442 fps97.6%
Hodgdon H322<<locked>>96%48,254 psi88%3586 fps97%
Hodgdon H4198<<locked>>88%48,428 psi88%3471 fps96.6%
Hodgdon TrailBossᴾ<<locked>>100%31,285 psi57%2277 fps100%
IMR 3031ᴾ<<locked>>100%42,482 psi77%3524 fps96.5%
IMR 4198<<locked>>94%47,456 psi86%3520 fps99.6%
IMR 4227<<locked>>84%48,428 psi88%3471 fps100%
Lovex S053<<locked>>86%49,516 psi90%3465 fps100%
Norma 200<<locked>>92%49,052 psi89%3570 fps99.7%
ReloadSwiss RS 14ᴾ<<locked>>100%31,067 psi56%2329 fps100%
ReloadSwiss RS 36<<locked>>84%48,051 psi87%3501 fps100%
SNPE Vectan BA6 1/2<<locked>>88%48,008 psi87%3264 fps100%
SNPE Vectan SP 3<<locked>>96%49,676 psi90%3589 fps98.1%
Somchem S335ᴾ<<locked>>100%45,397 psi83%3428 fps96.2%
Vihtavuori N120<<locked>>90%48,544 psi88%3497 fps100%
Vihtavuori N130<<locked>>96%46,688 psi85%3461 fps98.9%
Vihtavuori N133ᴾ<<locked>>100%46,354 psi84%3455 fps98.1%
Vihtavuori N135ᴾ<<locked>>100%38,305 psi70%3369 fps96.5%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%39,972 psi73%3271 fps97.7%
Accurate 2015<<locked>>90%35,099 psi64%3228 fps95.1%
Accurate 2495<<locked>>98%33,779 psi61%3264 fps95.2%
Accurate LT-30<<locked>>86%41,046 psi75%3281 fps95.3%
ADI AR 220722 gr80%35,404 psi64%3258 fps99.4%
ADI AR 221926.7 gr88%41,191 psi75%3425 fps95%
Alliant AR-Comp<<locked>>88%30,327 psi55%3169 fps95.9%
Alliant Reloder-10x<<locked>>84%33,533 psi61%3215 fps95.8%
Alliant Reloder-7<<locked>>80%36,738 psi67%3241 fps97.4%
Baschieri & Pellagri 106<<locked>>86%39,639 psi72%3251 fps95.4%
Hodgdon H322<<locked>>92%42,583 psi77%3458 fps95.5%
Hodgdon H4198<<locked>>86%45,310 psi82%3402 fps95.8%
Hodgdon TrailBoss<<locked>>80%22,843 psi42%2041 fps100%
IMR 3031<<locked>>98%39,726 psi72%3451 fps95.6%
IMR 4198<<locked>>80%31,618 psi57%3110 fps96%
IMR 4227<<locked>>80%42,598 psi77%3350 fps99.7%
Lovex S053<<locked>>80%41,887 psi76%3317 fps100%
Norma 200<<locked>>80%33,417 psi61%3196 fps96.6%
ReloadSwiss RS 14<<locked>>80%22,800 psi41%2093 fps100%
ReloadSwiss RS 36<<locked>>80%41,974 psi76%3373 fps99.6%
SNPE Vectan BA6 1/2<<locked>>80%38,754 psi70%3091 fps100%
SNPE Vectan SP 324.4 gr88%38,609 psi70%3337 fps95.3%
Somchem S335<<locked>>98%42,554 psi77%3363 fps95.4%
Vihtavuori N120<<locked>>80%35,592 psi65%3219 fps99.9%
Vihtavuori N130<<locked>>84%32,227 psi59%3104 fps95%
Vihtavuori N133<<locked>>92%35,824 psi65%3209 fps95.2%
Vihtavuori N135<<locked>>98%35,737 psi65%3301 fps95.6%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 27 powders for .22 Nosler loaded with the .224 | 45gr | MEN FMJ RN. Alliant Reloder-10x delivers the highest muzzle velocity at 3,589 fps; across all powders the maximum-charge window runs from 2,277 fps to 3,589 fps. Accurate 2015 gives the best case fill at 100 %, and 27 of the 27 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (379 MPa), the top charges use 56–90 %, leaving at least 10 % headroom. The 45.0 gr projectile in 0.224" calls for a 1:7.0 twist; slower twists will usually not stabilise this weight. Accurate 2015, Accurate 2495, Alliant AR-Comp reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ADI AR 2219, ADI AR 2207, SNPE Vectan SP 3 rank at the top here: for .22 Nosler with the .224 | 45gr | MEN FMJ RN they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data