Load data for .22 ARC + .224 | 40gr | CutEdge FBH

.22 ARC cartridge drawing
Cutting Edge logo

Load Specifications

Bullet Manufacturer:Cutting Edge
Bullet Weight:40 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.525"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34.6 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:52,000 psi

Load data in caliber .22 ARC with .224 | 40gr | CutEdge FBH bullet and 19 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant Reloder-10x, ADI AR 2207 and IMR 4198.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>86%45,730 psi88%3573 fps98.2%
Accurate 2015ᴾ<<locked>>100%44,251 psi85%3625 fps96.9%
ADI AR 2207<<locked>>90%44,686 psi86%3668 fps99.9%
Alliant AR-Compᴾ<<locked>>100%40,930 psi79%3648 fps98.5%
Alliant Reloder-10x<<locked>>96%44,730 psi86%3681 fps98.1%
Alliant Reloder-7<<locked>>90%46,847 psi90%3661 fps98.8%
Baschieri & Pellagri 106<<locked>>92%44,962 psi86%3533 fps95.9%
Hodgdon TrailBossᴾ<<locked>>100%30,400 psi58%2415 fps100%
IMR 4198<<locked>>94%44,222 psi85%3629 fps98.7%
IMR 4227<<locked>>84%45,049 psi87%3589 fps99.5%
Lovex S053<<locked>>86%46,499 psi89%3602 fps100%
Norma 200<<locked>>92%44,469 psi86%3658 fps98.6%
ReloadSwiss RS 14ᴾ<<locked>>100%29,965 psi58%2464 fps100%
ReloadSwiss RS 36<<locked>>84%44,222 psi85%3606 fps99.4%
SNPE Vectan BA6 1/2<<locked>>88%44,962 psi86%3406 fps100%
SNPE Vectan SP 3<<locked>>96%46,122 psi89%3691 fps96.4%
Vihtavuori N120<<locked>>90%44,831 psi86%3619 fps100%
Vihtavuori N130<<locked>>98%46,383 psi89%3629 fps98.1%
Vihtavuori N133ᴾ<<locked>>100%42,424 psi82%3537 fps96.2%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 1680<<locked>>80%37,057 psi71%3360 fps95.9%
Accurate 2015<<locked>>96%38,493 psi74%3484 fps95.2%
ADI AR 220722.6 gr80%32,111 psi62%3340 fps98%
Alliant AR-Comp<<locked>>94%33,344 psi64%3425 fps96%
Alliant Reloder-10x25 gr88%34,258 psi66%3409 fps95%
Alliant Reloder-7<<locked>>80%33,489 psi64%3317 fps95.2%
Baschieri & Pellagri 106<<locked>>90%41,800 psi80%3461 fps95%
Hodgdon TrailBoss<<locked>>80%21,843 psi42%2159 fps100%
IMR 419822.7 gr84%32,677 psi63%3310 fps95.2%
IMR 4227<<locked>>80%39,682 psi76%3465 fps98.8%
Lovex S053<<locked>>80%38,363 psi74%3422 fps100%
Norma 200<<locked>>82%31,908 psi61%3323 fps95%
ReloadSwiss RS 14<<locked>>80%21,654 psi42%2211 fps100%
ReloadSwiss RS 36<<locked>>80%39,059 psi75%3481 fps98.5%
SNPE Vectan BA6 1/2<<locked>>80%35,795 psi69%3215 fps100%
SNPE Vectan SP 3<<locked>>94%43,091 psi83%3619 fps95.6%
Vihtavuori N120<<locked>>80%32,358 psi62%3310 fps99%
Vihtavuori N130<<locked>>90%35,824 psi69%3373 fps95.3%
Vihtavuori N133<<locked>>98%40,074 psi77%3481 fps95.5%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 19 powders for .22 ARC loaded with the .224 | 40gr | CutEdge FBH. SNPE Vectan SP 3 delivers the highest muzzle velocity at 3,691 fps; across all powders the maximum-charge window runs from 2,415 fps to 3,691 fps. Accurate 2015 gives the best case fill at 100 %, and 19 of the 19 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (359 MPa), the top charges use 58–90 %, leaving at least 10 % headroom. Accurate 2015, Alliant AR-Comp, Hodgdon TrailBoss reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant Reloder-10x, ADI AR 2207, IMR 4198 rank at the top here: for .22 ARC with the .224 | 40gr | CutEdge FBH they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data