Load data for .219 Zipper + .224 | 45gr | Sellier & Bellot FMJ

.219 Zipper cartridge drawing
Sellier & Bellot logo

Load Specifications

Bullet Manufacturer:Sellier & Bellot
Bullet Weight:45 gr
Bullet Diameter:0.224"
Bullet Length:<<locked>>
Case Length (l3):1.933"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:34 Grains of Water
Primer Size:Small Rifle (SR)
Barrel Length:24"
Max. allowed Pressure:41,336 psi

Load data in caliber .219 Zipper with .224 | 45gr | Sellier & Bellot FMJ bullet and 10 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Alliant AR-Comp, ReloadSwiss RS 14 and Hodgdon TrailBoss.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>98%35,143 psi85%3192 fps96.1%
Alliant AR-Comp<<locked>>92%35,186 psi85%3225 fps98.2%
Alliant Reloder-10x<<locked>>86%36,608 psi89%3205 fps97.1%
Hodgdon TrailBossᴾ<<locked>>100%31,082 psi75%2228 fps100%
IMR 4198<<locked>>84%36,187 psi88%3153 fps97.8%
Norma 200<<locked>>82%36,419 psi88%3182 fps97.8%
ReloadSwiss RS 14ᴾ<<locked>>100%30,893 psi75%2280 fps100%
Vihtavuori N130<<locked>>86%35,128 psi85%3091 fps96.4%
Vihtavuori N133<<locked>>92%36,550 psi88%3127 fps95.8%
Vihtavuori N135<<locked>>98%36,811 psi89%3225 fps96.3%

Recommended = one of the top powders for this cartridge and bullet combination.

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 2495<<locked>>96%32,605 psi79%3127 fps95.1%
Alliant AR-Comp24 gr86%28,877 psi70%3025 fps95.4%
Alliant Reloder-10x<<locked>>82%32,111 psi78%3081 fps95.5%
Hodgdon TrailBoss7.8 gr80%22,931 psi55%2008 fps100%
IMR 4198<<locked>>80%31,821 psi77%3028 fps96.3%
Norma 200<<locked>>80%33,910 psi82%3114 fps97%
ReloadSwiss RS 147.9 gr80%22,524 psi54%2047 fps100%
Vihtavuori N130<<locked>>84%33,141 psi80%3038 fps95.7%
Vihtavuori N133<<locked>>90%34,505 psi83%3074 fps95%
Vihtavuori N135<<locked>>96%34,301 psi83%3156 fps95.4%

Recommended = one of the top powders for this cartridge and bullet combination.

ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.

<<locked>> you need an access license to unlock this data.

This overview compares 10 powders for .219 Zipper loaded with the .224 | 45gr | Sellier & Bellot FMJ. Alliant AR-Comp delivers the highest muzzle velocity at 3,225 fps; across all powders the maximum-charge window runs from 2,228 fps to 3,225 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 10 of the 10 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (285 MPa), the top charges use 75–89 %, leaving at least 11 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Alliant AR-Comp, ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .219 Zipper with the .224 | 45gr | Sellier & Bellot FMJ they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All load data