
Load Specifications
Load data in caliber .219 Donaldson Wasp with .224 | 35gr | Inceptor SRR bullet and 5 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are ReloadSwiss RS 14 and Hodgdon TrailBoss.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| ADI AR 2207 | <<locked>> | 86% | 35,302 psi | 86% | 3497 fps | 98% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 29,167 psi | 71% | 2484 fps | 100% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 28,645 psi | 70% | 2536 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 84% | 36,680 psi | 89% | 3320 fps | 100% |
| Vihtavuori N120 | <<locked>> | 86% | 35,549 psi | 87% | 3461 fps | 99% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| ADI AR 2207 | <<locked>> | 80% | 28,442 psi | 69% | 3281 fps | 95.3% |
| Hodgdon TrailBoss | 7.8 gr | 80% | 20,914 psi | 51% | 2231 fps | 100% |
| ReloadSwiss RS 14 | 8 gr | 80% | 20,639 psi | 50% | 2283 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 32,866 psi | 80% | 3232 fps | 100% |
| Vihtavuori N120 | <<locked>> | 80% | 28,776 psi | 70% | 3258 fps | 96.9% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 5 powders for .219 Donaldson Wasp loaded with the .224 | 35gr | Inceptor SRR. ADI AR 2207 delivers the highest muzzle velocity at 3,497 fps; across all powders the maximum-charge window runs from 2,484 fps to 3,497 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 5 of the 5 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (283 MPa), the top charges use 70–89 %, leaving at least 11 % headroom. The 35.0 gr projectile in 0.224" calls for a 1:9.5 twist; slower twists will usually not stabilise this weight. Hodgdon TrailBoss, ReloadSwiss RS 14 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. ReloadSwiss RS 14, Hodgdon TrailBoss rank at the top here: for .219 Donaldson Wasp with the .224 | 35gr | Inceptor SRR they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.