top of page

Load data for .218 Bee + .224 | 55gr | Sellier & Bellot FMJ

Recommended Powder(s): Vihtavuori N110

.218 Bee + .224 | 55gr | Sellier & Bellot FMJ

Load Specifications

(Use the Personalized Load Calculator below to adjust )

Bullet:
.224 | 55gr | Sellier & Bellot FMJ
Manufacturer SKU:
2903
Bullet Weight:
55gr | 3.6g
Bullet Diameter:
0.224" | 5.69mm
Bullet Length:
0.760" | 19.3mm
Caliber:
.218 Bee load data
Case Length (l3):
1.345" | 34.2mm
Cartridge Length (C.O.L.):
1.655" | 42.0mm
Seated Depth:
0.450" | 11.4mm
Shank Seated Depth:
0.371" | 9.4mm
Case Capacity:
18.0 Grains of Water | 1.17 cm³
Primer Size:
Small Rifle (SR)
Max. allowed Pressure:
46412 psi | 3200 bar
LID:
LID_B7204_C53
Last updated:
2025-01-01
Recommended Twist Rate:
1:11 - 1:9

Load data for 28 loads in caliber .218 Bee with .224 | 55gr | Sellier & Bellot FMJ bullet and 14 powders such as Vihtavuori N110. The key underlying parameters are shown in the table above.

  • Important Notice: DO NOT go below Minimum Charge or above Maximum Charge unless there are reasons. Since xxlreloading.com has no control over the equipment and components used by the customer and the data used in connection with the website, any responsibility and liability for the results achieved is rejected. Also see our Terms of Service

    Questions regarding the load data: Please read the information in the next tab "Explanations".

  • No data yet

  • .

    Use the Personalized Load Calculator to customize loads to your own specific requirements. Find more details in the help section.

    Our default view only displays powders/loads that fulfill certain criteria: Max pressure of a load <=90% of Max. Standardized Pressure. Fill Rate (Min FR): >80% and <100% for rife loads,  >60% and <100% for pistol loads. Min. Propellant Combustion (Min z): >90% for rifle loads , >80% for pistol/revolver loads. Relax these criteria at your own risk to potentially get more powders shown in the load tables.

Click on the desired row in the tables below to add a specific load / powder to your Diary and manage there.

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
90%
41292
89%
**15
98%
[Accurate 5744]*
<<locked>>
88%
41553
90%
**90
93%
Accurate No. 11 FS
<<locked>>
88%
40219
87%
**74
96%
Hodgdon LilGun
<<locked>>
85%
40379
87%
**75
100%
[IMR 4227]*
<<locked>>
96%
38464
83%
**34
94%
[Lovex D060]*
<<locked>>
90%
41553
90%
**90
93%
[Lovex D063]*
<<locked>>
87%
40538
87%
**64
92%
Lovex S053
<<locked>>
96%
35041
75%
**02
97%
[ReloadSwiss RS 36]*
<<locked>>
97%
37072
80%
**54
93%
SNPE Vectan BA6 1/2
<<locked>>
96%
33011
71%
**83
100%
[Shooters World Blackout]*
<<locked>>
87%
40538
87%
**64
92%
[Shooters World Buffalo Rifle]*
<<locked>>
90%
41553
90%
**90
93%
Vihtavuori N110 👍
<<locked>>
94%
39885
86%
**77
100%
[Vihtavuori N120]*
<<locked>>
97%
27006
58%
**47
92%

Max Load - Barrel Length: 23.60''

Powder
Charge
FR
MaxP
%
V(0)
z
ADI AR 2205
<<locked>>
81%
31183
67%
**21
96%
[Accurate 5744]*
<<locked>>
83%
35795
77%
**75
90%
[Accurate No. 11 FS]*
<<locked>>
81%
31662
68%
**03
94%
Hodgdon LilGun
<<locked>>
81%
35636
77%
**90
100%
[IMR 4227]*
<<locked>>
88%
30516
66%
**60
91%
[Lovex D060]*
<<locked>>
85%
35795
77%
**75
90%
[Lovex D063]*
<<locked>>
82%
34809
75%
**52
90%
[Lovex S053]*
<<locked>>
81%
22902
49%
**93
91%
[ReloadSwiss RS 36]*
<<locked>>
91%
30385
65%
**06
90%
SNPE Vectan BA6 1/2
<<locked>>
81%
22191
48%
**24
99%
[Shooters World Blackout]*
<<locked>>
82%
34809
75%
**52
90%
[Shooters World Buffalo Rifle]*
<<locked>>
85%
35795
77%
**75
90%
Vihtavuori N110
<<locked>>
81%
27325
59%
**24
99%
[Vihtavuori N120]*
<<locked>>
93%
24221
52%
**59
90%

Start Load - Barrel Length: 23.60''

Any powder missing? Then click here.

FR ... fill rate of the cartridge in percent

MaxP ... max. pressure of load in psi or bar

% ... max. pressure of load in percent of the maximum allowed pressure for this caliber 

V(0) ... muzzle velocity in feet per second (fps) or  meters per second (m/s)

z ... powder burnt in percent

[...] *... not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

[...] ²... fill rate low - you might want to consider using a filler to ensure proper ignition.

[...] ᴾ... possible press load - work up slowly to this load while watching for signs of excessive pressure.

👍  ... recommended powder/load for this caliber and bullet combination based on its ballistic performance.

bottom of page