
Load Specifications
Load data in caliber .218 Bee with .224 | 35gr | IBEX TRD bullet and 6 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are Hodgdon LilGun, Lovex S040 and Vihtavuori N110.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Hodgdon LilGun | <<locked>> | 94% | 41,771 psi | 90% | 3284 fps | 99.5% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 23,395 psi | 50% | 1985 fps | 100% |
| Lovex S040 | <<locked>> | 90% | 40,988 psi | 88% | 3071 fps | 98.2% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 22,510 psi | 49% | 2028 fps | 100% |
| SNPE Vectan BA6 1/2ᴾ | <<locked>> | 100% | 29,646 psi | 64% | 2805 fps | 97.9% |
| Vihtavuori N110ᴾ | <<locked>> | 100% | 37,217 psi | 80% | 3068 fps | 98.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Hodgdon LilGun | 11.8 gr | 80% | 25,860 psi | 56% | 2867 fps | 95.2% |
| Hodgdon TrailBoss | <<locked>> | 80% | 16,795 psi | 36% | 1772 fps | 100% |
| Lovex S040 | 10.1 gr | 80% | 30,371 psi | 65% | 2808 fps | 95.1% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 16,346 psi | 35% | 1814 fps | 100% |
| SNPE Vectan BA6 1/2 | <<locked>> | 92% | 23,960 psi | 52% | 2625 fps | 95.5% |
| Vihtavuori N110 | 11 gr | 90% | 28,050 psi | 60% | 2828 fps | 95.5% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 6 powders for .218 Bee loaded with the .224 | 35gr | IBEX TRD. Hodgdon LilGun delivers the highest muzzle velocity at 3,284 fps; across all powders the maximum-charge window runs from 1,985 fps to 3,284 fps. Hodgdon TrailBoss gives the best case fill at 100 %, and 6 of the 6 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (320 MPa), the top charges use 49–90 %, leaving at least 10 % headroom. Hodgdon TrailBoss, ReloadSwiss RS 14, SNPE Vectan BA6 1/2 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. Hodgdon LilGun, Lovex S040, Vihtavuori N110 rank at the top here: for .218 Bee with the .224 | 35gr | IBEX TRD they combine a high case fill with complete burn and sit in the upper velocity band. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.