
Load Specifications
Load data in caliber 7.5 x 55 Swiss with .308 | 220gr | Sierra MatchKing bullet and 8 powders. The key underlying parameters are shown in the table above.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 33% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.3"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| ADI APS 350² | <<locked>> | 33% | 19,247 psi | 35% | 1089 fps | 100% |
| ADI APS 450² | <<locked>> | 33% | 19,029 psi | 35% | 1109 fps | 100% |
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 33% | 16,259 psi | 30% | 1070 fps | 100% |
| Hodgdon Clays² | <<locked>> | 37% | 19,290 psi | 35% | 1112 fps | 100% |
| Hodgdon TrailBoss² | <<locked>> | 61% | 19,072 psi | 35% | 1099 fps | 100% |
| ReloadSwiss RS 14² | <<locked>> | 61% | 19,334 psi | 35% | 1125 fps | 100% |
| SNPE Vectan Tubal 5000*² | <<locked>> | 33% | 7,905 psi | 14% | 1079 fps | 80.8% |
| Vihtavuori N32C Tin Star² | <<locked>> | 45% | 19,798 psi | 36% | 1099 fps | 100% |
Start Load - Barrel Length: 23.3"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| ADI APS 350² | <<locked>> | 33% | 19,247 psi | 35% | 1089 fps | 100% |
| ADI APS 450² | <<locked>> | 33% | 19,029 psi | 35% | 1109 fps | 100% |
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 33% | 16,259 psi | 30% | 1070 fps | 100% |
| Hodgdon Clays² | <<locked>> | 33% | 16,737 psi | 30% | 1047 fps | 100% |
| Hodgdon TrailBoss² | <<locked>> | 33% | 9,311 psi | 17% | 804 fps | 100% |
| ReloadSwiss RS 14² | <<locked>> | 33% | 9,355 psi | 17% | 823 fps | 100% |
| SNPE Vectan Tubal 5000*² | <<locked>> | 33% | 7,905 psi | 14% | 1079 fps | 80.8% |
| Vihtavuori N32C Tin Star² | <<locked>> | 33% | 13,793 psi | 25% | 942 fps | 100% |
* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
² fill rate low - you might want to consider using a filler to ensure proper ignition.
Subsonic loads are filtered so the start load is at least 220 m/s and the maximum load does not exceed the speed of sound (≈343 m/s).
This overview compares 8 powders for 7.5 x 55 Swiss loaded with the .308 | 220gr | Sierra MatchKing in the subsonic range. ReloadSwiss RS 14 delivers the highest muzzle velocity at 1,125 fps; across all powders the maximum-charge window runs from 1,070 fps to 1,125 fps. Hodgdon TrailBoss gives the best case fill at 61 %, and 0 of the 8 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (380 MPa), the top charges use 14–36 %, leaving at least 64 % headroom. The 220.0 gr projectile in 0.308" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. As outliers, SNPE Vectan Tubal 5000 burn incompletely and react more sensitively to barrel length and temperature. ADI APS 350, ADI APS 450, Baschieri & Pellagri 102 Pistol stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.