
Load Specifications
Load data in caliber 7.5 x 55 Swiss with .308 | 210gr | Berger VLD Target bullet and 6 powders. The key underlying parameters are shown in the table above.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 33% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.3"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| ADI APS 350² | <<locked>> | 33% | 19,087 psi | 35% | 1109 fps | 100% |
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 33% | 16,070 psi | 29% | 1093 fps | 100% |
| Hodgdon Clays² | <<locked>> | 33% | 16,578 psi | 30% | 1063 fps | 100% |
| Hodgdon TrailBoss² | <<locked>> | 61% | 18,927 psi | 34% | 1119 fps | 100% |
| ReloadSwiss RS 14² | <<locked>> | 57% | 17,564 psi | 32% | 1106 fps | 100% |
| Vihtavuori N32C Tin Star² | <<locked>> | 45% | 19,667 psi | 36% | 1119 fps | 100% |
Start Load - Barrel Length: 23.3"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| ADI APS 350² | <<locked>> | 33% | 19,087 psi | 35% | 1109 fps | 100% |
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 33% | 16,070 psi | 29% | 1093 fps | 100% |
| Hodgdon Clays² | <<locked>> | 33% | 16,578 psi | 30% | 1063 fps | 100% |
| Hodgdon TrailBoss² | <<locked>> | 33% | 9,152 psi | 17% | 817 fps | 100% |
| ReloadSwiss RS 14² | <<locked>> | 33% | 9,369 psi | 17% | 843 fps | 100% |
| Vihtavuori N32C Tin Star² | <<locked>> | 33% | 13,634 psi | 25% | 958 fps | 100% |
² fill rate low - you might want to consider using a filler to ensure proper ignition.
Subsonic loads are filtered so the start load is at least 220 m/s and the maximum load does not exceed the speed of sound (≈343 m/s).
This overview compares 6 powders for 7.5 x 55 Swiss loaded with the .308 | 210gr | Berger VLD Target in the subsonic range. Hodgdon TrailBoss delivers the highest muzzle velocity at 1,119 fps; across all powders the maximum-charge window runs from 1,063 fps to 1,119 fps. Hodgdon TrailBoss gives the best case fill at 61 %, and 0 of the 6 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (380 MPa), the top charges use 29–36 %, leaving at least 64 % headroom. The 210.0 gr projectile in 0.308" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. ADI APS 350, Baschieri & Pellagri 102 Pistol, Hodgdon Clays stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.