
Load Specifications
Load data in caliber 7.5 x 55 Swiss with .308 | 200gr | Lapua Subsonic bullet and 5 powders. The key underlying parameters are shown in the table above.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 33% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.3"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 33% | 15,882 psi | 29% | 1115 fps | 100% |
| Hodgdon Clays² | <<locked>> | 33% | 16,447 psi | 30% | 1089 fps | 100% |
| Hodgdon TrailBoss² | <<locked>> | 57% | 17,158 psi | 31% | 1106 fps | 100% |
| ReloadSwiss RS 14² | <<locked>> | 53% | 15,838 psi | 29% | 1089 fps | 100% |
| Vihtavuori N32C Tin Star² | <<locked>> | 41% | 17,434 psi | 32% | 1093 fps | 100% |
Start Load - Barrel Length: 23.3"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 33% | 15,882 psi | 29% | 1115 fps | 100% |
| Hodgdon Clays² | <<locked>> | 33% | 16,447 psi | 30% | 1089 fps | 100% |
| Hodgdon TrailBoss² | <<locked>> | 33% | 9,239 psi | 17% | 843 fps | 100% |
| ReloadSwiss RS 14² | <<locked>> | 33% | 9,253 psi | 17% | 863 fps | 100% |
| Vihtavuori N32C Tin Star² | <<locked>> | 33% | 13,518 psi | 25% | 981 fps | 100% |
² fill rate low - you might want to consider using a filler to ensure proper ignition.
Subsonic loads are filtered so the start load is at least 220 m/s and the maximum load does not exceed the speed of sound (≈343 m/s).
This overview compares 5 powders for 7.5 x 55 Swiss loaded with the .308 | 200gr | Lapua Subsonic in the subsonic range. Baschieri & Pellagri 102 Pistol delivers the highest muzzle velocity at 1,115 fps; across all powders the maximum-charge window runs from 1,089 fps to 1,115 fps. Hodgdon TrailBoss gives the best case fill at 57 %, and 0 of the 5 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (380 MPa), the top charges use 29–32 %, leaving at least 68 % headroom. The 200.0 gr projectile in 0.308" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Alliant Reloder-17, ReloadSwiss RS 70, Alliant Power Pro 2000-MR rank at the top here: for 7.5 x 55 Swiss with the .308 | 200gr | Lapua Subsonic they combine a high case fill with complete burn and sit in the upper velocity band. Baschieri & Pellagri 102 Pistol, Hodgdon Clays, Hodgdon TrailBoss stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.