Subsonic load data for 6.5 Creedmoor + .264 | 159gr | RWS TMR

6.5 Creedmoor cartridge drawing
RWS logo

Load Specifications

Bullet Manufacturer:RWS
Bullet Weight:159 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):1.92"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:52.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:18"
Max. allowed Pressure:63,091 psi
Recommended Twist Rate:1:11.5

Load data in caliber 6.5 Creedmoor with .264 | 159gr | RWS TMR bullet and 8 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 33% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 18"

PowderChargeFRMaxP%V(0)z
ADI APS 350²<<locked>>33%19,464 psi31%1109 fps100%
ADI APS 450²<<locked>>33%19,261 psi31%1125 fps100%
Baschieri & Pellagri 102 Pistol²<<locked>>33%16,476 psi26%1079 fps100%
Hodgdon Clays²<<locked>>37%19,334 psi31%1122 fps100%
Hodgdon TrailBoss²<<locked>>61%19,464 psi31%1119 fps100%
ReloadSwiss RS 14²<<locked>>57%18,028 psi29%1102 fps100%
SNPE Vectan Tubal 5000*²<<locked>>33%8,572 psi14%1089 fps80.1%
Vihtavuori N32C Tin Star²<<locked>>45%20,146 psi32%1122 fps100%

Start Load - Barrel Length: 18"

PowderChargeFRMaxP%V(0)z
ADI APS 350²<<locked>>33%19,464 psi31%1109 fps100%
ADI APS 450²<<locked>>33%19,261 psi31%1125 fps100%
Baschieri & Pellagri 102 Pistol²<<locked>>33%16,476 psi26%1079 fps100%
Hodgdon Clays²<<locked>>33%16,969 psi27%1060 fps100%
Hodgdon TrailBoss²<<locked>>33%9,529 psi15%820 fps100%
ReloadSwiss RS 14²<<locked>>33%9,631 psi15%840 fps100%
SNPE Vectan Tubal 5000*²<<locked>>33%8,572 psi14%1089 fps80.1%
Vihtavuori N32C Tin Star²<<locked>>33%13,938 psi22%955 fps100%

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

<<locked>> you need an access license to unlock this data.

Subsonic loads are filtered so the start load is at least 220 m/s and the maximum load does not exceed the speed of sound (≈343 m/s).

This overview compares 8 powders for 6.5 Creedmoor loaded with the .264 | 159gr | RWS TMR in the subsonic range. ADI APS 450 delivers the highest muzzle velocity at 1,125 fps; across all powders the maximum-charge window runs from 1,079 fps to 1,125 fps. Hodgdon TrailBoss gives the best case fill at 61 %, and 0 of the 8 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (435 MPa), the top charges use 14–32 %, leaving at least 68 % headroom. The 159.0 gr projectile in 0.264" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. As outliers, SNPE Vectan Tubal 5000 burn incompletely and react more sensitively to barrel length and temperature. ADI APS 350, Baschieri & Pellagri 102 Pistol, Hodgdon Clays stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All subsonic load data