Subsonic load data for 6.5 Creedmoor + .264 | 130gr | Lehigh Defense Controlled Chaos

6.5 Creedmoor cartridge drawing
Lehigh Defense logo

Load Specifications

Bullet Manufacturer:Lehigh Defense
Bullet Weight:130 gr
Bullet Diameter:0.264"
Bullet Length:<<locked>>
Case Length (l3):1.92"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:52.5 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:18"
Max. allowed Pressure:63,091 psi
Recommended Twist Rate:1:8.0

Load data in caliber 6.5 Creedmoor with .264 | 130gr | Lehigh Defense Controlled Chaos bullet and 3 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 33% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 18"

PowderChargeFRMaxP%V(0)z
Hodgdon TrailBoss²<<locked>>53%15,621 psi25%1122 fps100%
ReloadSwiss RS 14²<<locked>>49%14,373 psi23%1106 fps100%
Vihtavuori N32C Tin Star²<<locked>>37%15,258 psi24%1093 fps100%

Start Load - Barrel Length: 18"

PowderChargeFRMaxP%V(0)z
Hodgdon TrailBoss²<<locked>>33%9,108 psi14%886 fps100%
ReloadSwiss RS 14²<<locked>>33%9,166 psi15%909 fps100%
Vihtavuori N32C Tin Star²<<locked>>33%13,445 psi21%1033 fps100%

² fill rate low - you might want to consider using a filler to ensure proper ignition.

<<locked>> you need an access license to unlock this data.

Subsonic loads are filtered so the start load is at least 220 m/s and the maximum load does not exceed the speed of sound (≈343 m/s).

This overview compares 3 powders for 6.5 Creedmoor loaded with the .264 | 130gr | Lehigh Defense Controlled Chaos in the subsonic range. Hodgdon TrailBoss delivers the highest muzzle velocity at 1,122 fps; across all powders the maximum-charge window runs from 1,093 fps to 1,122 fps. Hodgdon TrailBoss gives the best case fill at 53 %, and 0 of the 3 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (435 MPa), the top charges use 23–25 %, leaving at least 75 % headroom. The 130.0 gr projectile in 0.264" calls for a 1:8.0 twist; slower twists will usually not stabilise this weight. Alliant Power Pro 2000-MR, Alliant Reloder-17, ReloadSwiss RS 52 rank at the top here: for 6.5 Creedmoor with the .264 | 130gr | Lehigh Defense Controlled Chaos they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon TrailBoss, ReloadSwiss RS 14, Vihtavuori N32C Tin Star stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All subsonic load data