Subsonic load data for .308 Win. + .308 | 190gr | Hornady Sub-X

.308 Win. cartridge drawing
Hornady logo

Load Specifications

Bullet Manufacturer:Hornady
Bullet Weight:190 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.014"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:56 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:18"
Max. allowed Pressure:60,191 psi
Recommended Twist Rate:1:13.0

Load data in caliber .308 Win. with .308 | 190gr | Hornady Sub-X bullet and 9 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 33% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 18"

PowderChargeFRMaxP%V(0)z
ADI APS 350²<<locked>>33%18,710 psi31%1070 fps100%
ADI APS 450²<<locked>>33%18,376 psi31%1086 fps100%
ADI AS 30²<<locked>>33%19,638 psi33%1125 fps100%
Baschieri & Pellagri 102 Pistol²<<locked>>37%17,477 psi29%1109 fps100%
Hodgdon Clays²<<locked>>37%18,449 psi31%1086 fps100%
Hodgdon TrailBoss²<<locked>>65%19,508 psi32%1109 fps100%
ReloadSwiss RS 14²<<locked>>61%18,086 psi30%1099 fps100%
SNPE Vectan BA10²<<locked>>33%19,899 psi33%1122 fps100%
Vihtavuori N32C Tin Star²<<locked>>49%20,943 psi35%1122 fps100%

Start Load - Barrel Length: 18"

PowderChargeFRMaxP%V(0)z
ADI APS 350²<<locked>>33%18,710 psi31%1070 fps100%
ADI APS 450²<<locked>>33%18,376 psi31%1086 fps100%
ADI AS 30²<<locked>>33%19,638 psi33%1125 fps100%
Baschieri & Pellagri 102 Pistol²<<locked>>33%15,098 psi25%1043 fps100%
Hodgdon Clays²<<locked>>33%16,114 psi27%1024 fps100%
Hodgdon TrailBoss²<<locked>>33%8,760 psi15%787 fps100%
ReloadSwiss RS 14²<<locked>>33%8,746 psi15%807 fps100%
SNPE Vectan BA10²<<locked>>33%19,899 psi33%1122 fps100%
Vihtavuori N32C Tin Star²<<locked>>33%13,053 psi22%919 fps100%

² fill rate low - you might want to consider using a filler to ensure proper ignition.

<<locked>> you need an access license to unlock this data.

Subsonic loads are filtered so the start load is at least 220 m/s and the maximum load does not exceed the speed of sound (≈343 m/s).

This overview compares 9 powders for .308 Win. loaded with the .308 | 190gr | Hornady Sub-X in the subsonic range. ADI AS 30 delivers the highest muzzle velocity at 1,125 fps; across all powders the maximum-charge window runs from 1,070 fps to 1,125 fps. Hodgdon TrailBoss gives the best case fill at 65 %, and 0 of the 9 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (415 MPa), the top charges use 29–35 %, leaving at least 65 % headroom. The 190.0 gr projectile in 0.308" calls for a 1:13.0 twist; slower twists will usually not stabilise this weight. Alliant Power Pro 2000-MR, Hodgdon CFE223, Hodgdon LEVERevolution rank at the top here: for .308 Win. with the .308 | 190gr | Hornady Sub-X they combine a high case fill with complete burn and sit in the upper velocity band. ADI APS 350, ADI APS 450, Baschieri & Pellagri 102 Pistol stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All subsonic load data