
Load Specifications
Load data in caliber .308 Win. with .308 | 188gr | Discreet Ballistics Selous Machined Expander bullet and 10 powders. The key underlying parameters are shown in the table above.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 33% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 18"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| ADI APS 350² | <<locked>> | 37% | 21,118 psi | 35% | 1115 fps | 100% |
| ADI APS 450² | <<locked>> | 33% | 18,086 psi | 30% | 1073 fps | 100% |
| ADI AS 30² | <<locked>> | 33% | 19,624 psi | 33% | 1115 fps | 100% |
| Alliant RED DOT² | <<locked>> | 33% | 19,392 psi | 32% | 1122 fps | 100% |
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 37% | 17,085 psi | 28% | 1093 fps | 100% |
| Hodgdon Clays² | <<locked>> | 37% | 18,188 psi | 30% | 1070 fps | 100% |
| Hodgdon TrailBoss² | <<locked>> | 65% | 19,145 psi | 32% | 1096 fps | 100% |
| ReloadSwiss RS 14² | <<locked>> | 65% | 19,276 psi | 32% | 1122 fps | 100% |
| SNPE Vectan BA10² | <<locked>> | 33% | 19,682 psi | 33% | 1112 fps | 100% |
| Vihtavuori N32C Tin Star² | <<locked>> | 49% | 20,624 psi | 34% | 1109 fps | 100% |
Start Load - Barrel Length: 18"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| ADI APS 350² | <<locked>> | 33% | 18,666 psi | 31% | 1060 fps | 100% |
| ADI APS 450² | <<locked>> | 33% | 18,086 psi | 30% | 1073 fps | 100% |
| ADI AS 30² | <<locked>> | 33% | 19,624 psi | 33% | 1115 fps | 100% |
| Alliant RED DOT² | <<locked>> | 33% | 19,392 psi | 32% | 1122 fps | 100% |
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 33% | 14,881 psi | 25% | 1033 fps | 100% |
| Hodgdon Clays² | <<locked>> | 33% | 16,056 psi | 27% | 1017 fps | 100% |
| Hodgdon TrailBoss² | <<locked>> | 33% | 8,717 psi | 14% | 781 fps | 100% |
| ReloadSwiss RS 14² | <<locked>> | 33% | 8,702 psi | 14% | 801 fps | 100% |
| SNPE Vectan BA10² | <<locked>> | 33% | 19,682 psi | 33% | 1112 fps | 100% |
| Vihtavuori N32C Tin Star² | <<locked>> | 33% | 12,937 psi | 21% | 912 fps | 100% |
² fill rate low - you might want to consider using a filler to ensure proper ignition.
Subsonic loads are filtered so the start load is at least 220 m/s and the maximum load does not exceed the speed of sound (≈343 m/s).
This overview compares 10 powders for .308 Win. loaded with the .308 | 188gr | Discreet Ballistics Selous Machined Expander in the subsonic range. Alliant RED DOT delivers the highest muzzle velocity at 1,122 fps; across all powders the maximum-charge window runs from 1,070 fps to 1,122 fps. Hodgdon TrailBoss gives the best case fill at 65 %, and 0 of the 10 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (415 MPa), the top charges use 28–35 %, leaving at least 65 % headroom. The 188.0 gr projectile in 0.308" calls for a 1:12.0 twist; slower twists will usually not stabilise this weight. ADI APS 350, ADI APS 450, ADI AS 30 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.