Subsonic load data for .30-06 Spring. + .308 | 230gr | Berger Hybrid Target

.30-06 Spring. cartridge drawing
Berger logo

Load Specifications

Bullet Manufacturer:Berger
Bullet Weight:230 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.494"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:68.2 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:58,740 psi
Recommended Twist Rate:1:10.0

Load data in caliber .30-06 Spring. with .308 | 230gr | Berger Hybrid Target bullet and 12 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 33% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 4064*²<<locked>>33%7,977 psi14%1115 fps80.6%
ADI APS 350²<<locked>>33%19,305 psi33%1070 fps100%
ADI APS 450²<<locked>>33%19,102 psi33%1089 fps100%
Baschieri & Pellagri 102 Pistol²<<locked>>37%18,724 psi32%1112 fps100%
Hodgdon Clays²<<locked>>37%19,102 psi33%1086 fps100%
Hodgdon TrailBoss²<<locked>>65%20,610 psi35%1109 fps100%
ReloadSwiss RS 14²<<locked>>61%19,218 psi33%1099 fps100%
SNPE Vectan BA10²<<locked>>33%20,726 psi35%1125 fps100%
SNPE Vectan Tubal 5000*²<<locked>>33%7,890 psi13%1063 fps81.2%
Vihtavuori N135*²<<locked>>33%8,180 psi14%1115 fps84.5%
Vihtavuori N140*²<<locked>>33%8,311 psi14%1106 fps80.7%
Vihtavuori N32C Tin Star²<<locked>>49%21,857 psi37%1122 fps100%

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Accurate 4064*²<<locked>>33%7,977 psi14%1115 fps80.6%
ADI APS 350²<<locked>>33%19,305 psi33%1070 fps100%
ADI APS 450²<<locked>>33%19,102 psi33%1089 fps100%
Baschieri & Pellagri 102 Pistol²<<locked>>33%16,114 psi27%1047 fps100%
Hodgdon Clays²<<locked>>33%16,781 psi29%1027 fps100%
Hodgdon TrailBoss²<<locked>>33%9,268 psi16%787 fps100%
ReloadSwiss RS 14²<<locked>>33%9,326 psi16%807 fps100%
SNPE Vectan BA10²<<locked>>33%20,726 psi35%1125 fps100%
SNPE Vectan Tubal 5000*²<<locked>>33%7,890 psi13%1063 fps81.2%
Vihtavuori N135*²<<locked>>33%8,180 psi14%1115 fps84.5%
Vihtavuori N140*²<<locked>>33%8,311 psi14%1106 fps80.7%
Vihtavuori N32C Tin Star²<<locked>>33%13,605 psi23%915 fps100%

* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.

² fill rate low - you might want to consider using a filler to ensure proper ignition.

<<locked>> you need an access license to unlock this data.

Subsonic loads are filtered so the start load is at least 220 m/s and the maximum load does not exceed the speed of sound (≈343 m/s).

This overview compares 12 powders for .30-06 Spring. loaded with the .308 | 230gr | Berger Hybrid Target in the subsonic range. SNPE Vectan BA10 delivers the highest muzzle velocity at 1,125 fps; across all powders the maximum-charge window runs from 1,063 fps to 1,125 fps. Hodgdon TrailBoss gives the best case fill at 65 %, and 0 of the 12 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (405 MPa), the top charges use 13–37 %, leaving at least 63 % headroom. The 230.0 gr projectile in 0.308" calls for a 1:10.0 twist; slower twists will usually not stabilise this weight. ReloadSwiss RS 70, Alliant Power Pro 2000-MR, Hodgdon Superformance rank at the top here: for .30-06 Spring. with the .308 | 230gr | Berger Hybrid Target they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 4064, SNPE Vectan Tubal 5000, Vihtavuori N135 burn incompletely and react more sensitively to barrel length and temperature. Accurate 4064, ADI APS 350, ADI APS 450 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All subsonic load data