
Load Specifications
Load data in caliber .30-06 Spring. with .308 | 230gr | Berger Hybrid OTM Tactical bullet and 10 powders. The key underlying parameters are shown in the table above.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 33% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 4064*² | <<locked>> | 33% | 8,093 psi | 14% | 1125 fps | 81.1% |
| ADI APS 350² | <<locked>> | 33% | 19,174 psi | 33% | 1070 fps | 100% |
| ADI APS 450² | <<locked>> | 33% | 18,971 psi | 32% | 1089 fps | 100% |
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 37% | 18,768 psi | 32% | 1119 fps | 100% |
| Hodgdon Clays² | <<locked>> | 37% | 19,218 psi | 33% | 1093 fps | 100% |
| Hodgdon TrailBoss² | <<locked>> | 65% | 20,639 psi | 35% | 1115 fps | 100% |
| ReloadSwiss RS 14² | <<locked>> | 61% | 19,276 psi | 33% | 1106 fps | 100% |
| SNPE Vectan Tubal 5000*² | <<locked>> | 33% | 7,977 psi | 14% | 1073 fps | 81.7% |
| Vihtavuori N140*² | <<locked>> | 33% | 8,398 psi | 14% | 1115 fps | 81.2% |
| Vihtavuori N32C Tin Star² | <<locked>> | 45% | 19,740 psi | 34% | 1083 fps | 100% |
Start Load - Barrel Length: 24"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 4064*² | <<locked>> | 33% | 8,093 psi | 14% | 1125 fps | 81.1% |
| ADI APS 350² | <<locked>> | 33% | 19,174 psi | 33% | 1070 fps | 100% |
| ADI APS 450² | <<locked>> | 33% | 18,971 psi | 32% | 1089 fps | 100% |
| Baschieri & Pellagri 102 Pistol² | <<locked>> | 33% | 16,201 psi | 28% | 1053 fps | 100% |
| Hodgdon Clays² | <<locked>> | 33% | 16,679 psi | 28% | 1027 fps | 100% |
| Hodgdon TrailBoss² | <<locked>> | 33% | 9,297 psi | 16% | 791 fps | 100% |
| ReloadSwiss RS 14² | <<locked>> | 33% | 9,340 psi | 16% | 810 fps | 100% |
| SNPE Vectan Tubal 5000*² | <<locked>> | 33% | 7,977 psi | 14% | 1073 fps | 81.7% |
| Vihtavuori N140*² | <<locked>> | 33% | 8,398 psi | 14% | 1115 fps | 81.2% |
| Vihtavuori N32C Tin Star² | <<locked>> | 33% | 13,750 psi | 23% | 925 fps | 100% |
* not dangerous but load has suboptimal powder burnt with possible characteristics such as extensive muzzle flash or inaccurate loads.
² fill rate low - you might want to consider using a filler to ensure proper ignition.
Subsonic loads are filtered so the start load is at least 220 m/s and the maximum load does not exceed the speed of sound (≈343 m/s).
This overview compares 10 powders for .30-06 Spring. loaded with the .308 | 230gr | Berger Hybrid OTM Tactical in the subsonic range. Accurate 4064 delivers the highest muzzle velocity at 1,125 fps; across all powders the maximum-charge window runs from 1,070 fps to 1,125 fps. Hodgdon TrailBoss gives the best case fill at 65 %, and 0 of the 10 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (405 MPa), the top charges use 14–35 %, leaving at least 65 % headroom. The 230.0 gr projectile in 0.308" calls for a 1:10.5 twist; slower twists will usually not stabilise this weight. As outliers, Accurate 4064, SNPE Vectan Tubal 5000, Vihtavuori N140 burn incompletely and react more sensitively to barrel length and temperature. ADI APS 350, ADI APS 450, Baschieri & Pellagri 102 Pistol stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.