Subsonic load data for .30-06 Spring. + .308 | 220gr | MAKER 300 blackout

.30-06 Spring. cartridge drawing
MAKER logo

Load Specifications

Bullet Manufacturer:MAKER
Bullet Weight:220 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.494"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:68.2 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:58,740 psi
Recommended Twist Rate:1:11.0

Load data in caliber .30-06 Spring. with .308 | 220gr | MAKER 300 blackout bullet and 6 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 33% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
ADI APS 350²<<locked>>33%19,160 psi33%1096 fps100%
Baschieri & Pellagri 102 Pistol²<<locked>>33%16,128 psi27%1076 fps100%
Hodgdon Clays²<<locked>>33%19,754 psi34%1115 fps100%
Hodgdon TrailBoss²<<locked>>61%18,942 psi32%1102 fps100%
ReloadSwiss RS 14²<<locked>>57%17,608 psi30%1093 fps100%
Vihtavuori N32C Tin Star²<<locked>>41%19,392 psi33%1096 fps100%

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
ADI APS 350²<<locked>>33%19,160 psi33%1096 fps100%
Baschieri & Pellagri 102 Pistol²<<locked>>33%16,128 psi27%1076 fps100%
Hodgdon Clays²<<locked>>33%19,754 psi34%1115 fps100%
Hodgdon TrailBoss²<<locked>>33%9,253 psi16%810 fps100%
ReloadSwiss RS 14²<<locked>>33%9,282 psi16%830 fps100%
Vihtavuori N32C Tin Star²<<locked>>33%15,142 psi26%988 fps100%

² fill rate low - you might want to consider using a filler to ensure proper ignition.

<<locked>> you need an access license to unlock this data.

Subsonic loads are filtered so the start load is at least 220 m/s and the maximum load does not exceed the speed of sound (≈343 m/s).

This overview compares 6 powders for .30-06 Spring. loaded with the .308 | 220gr | MAKER 300 blackout in the subsonic range. Hodgdon Clays delivers the highest muzzle velocity at 1,115 fps; across all powders the maximum-charge window runs from 1,076 fps to 1,115 fps. Hodgdon TrailBoss gives the best case fill at 61 %, and 0 of the 6 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (405 MPa), the top charges use 27–34 %, leaving at least 66 % headroom. The 220.0 gr projectile in 0.308" calls for a 1:11.0 twist; slower twists will usually not stabilise this weight. Alliant Reloder-17, ReloadSwiss RS 70, Alliant Power Pro 2000-MR rank at the top here: for .30-06 Spring. with the .308 | 220gr | MAKER 300 blackout they combine a high case fill with complete burn and sit in the upper velocity band. ADI APS 350, Baschieri & Pellagri 102 Pistol, Hodgdon Clays stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All subsonic load data