Subsonic load data for .30-06 Spring. + .308 | 200gr | Reichenberg Subsonic

.30-06 Spring. cartridge drawing
Reichenberg logo

Load Specifications

Bullet Manufacturer:Reichenberg
Bullet Weight:200 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.494"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:68.2 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:58,740 psi
Recommended Twist Rate:1:13.0

Load data in caliber .30-06 Spring. with .308 | 200gr | Reichenberg Subsonic bullet and 4 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 33% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Hodgdon Clays²<<locked>>33%16,462 psi28%1119 fps100%
Hodgdon TrailBoss²<<locked>>53%15,592 psi27%1089 fps100%
ReloadSwiss RS 14²<<locked>>53%15,751 psi27%1119 fps100%
Vihtavuori N32C Tin Star²<<locked>>41%17,129 psi29%1115 fps100%

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Hodgdon Clays²<<locked>>33%16,462 psi28%1119 fps100%
Hodgdon TrailBoss²<<locked>>33%8,934 psi15%860 fps100%
ReloadSwiss RS 14²<<locked>>33%8,934 psi15%883 fps100%
Vihtavuori N32C Tin Star²<<locked>>33%13,213 psi22%1001 fps100%

² fill rate low - you might want to consider using a filler to ensure proper ignition.

<<locked>> you need an access license to unlock this data.

Subsonic loads are filtered so the start load is at least 220 m/s and the maximum load does not exceed the speed of sound (≈343 m/s).

This overview compares 4 powders for .30-06 Spring. loaded with the .308 | 200gr | Reichenberg Subsonic in the subsonic range. Hodgdon Clays delivers the highest muzzle velocity at 1,119 fps; across all powders the maximum-charge window runs from 1,089 fps to 1,119 fps. Hodgdon TrailBoss gives the best case fill at 53 %, and 0 of the 4 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (405 MPa), the top charges use 27–29 %, leaving at least 71 % headroom. The 200.0 gr projectile in 0.308" calls for a 1:13.0 twist; slower twists will usually not stabilise this weight. ReloadSwiss RS 60, Hodgdon Superformance, Alliant Reloder-17 rank at the top here: for .30-06 Spring. with the .308 | 200gr | Reichenberg Subsonic they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon Clays, Hodgdon TrailBoss, ReloadSwiss RS 14 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All subsonic load data