Subsonic load data for .30-06 Spring. + .308 | 200gr | Lapua Subsonic

.30-06 Spring. cartridge drawing
Lapua logo

Load Specifications

Bullet Manufacturer:Lapua
Bullet Weight:200 gr
Bullet Diameter:0.308"
Bullet Length:<<locked>>
Case Length (l3):2.494"
Cartridge Length (C.O.L.):<<locked>>
Case Capacity:68.2 Grains of Water
Primer Size:Large Rifle (LR)
Barrel Length:24"
Max. allowed Pressure:58,740 psi
Recommended Twist Rate:1:11.5

Load data in caliber .30-06 Spring. with .308 | 200gr | Lapua Subsonic bullet and 4 powders. The key underlying parameters are shown in the table above.

Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.

Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 33% and propellant combustion ≥ 80%. Use the sliders above the tables to adjust these thresholds.

Charge: Powder weight in grains. Start with the minimum load and work up carefully.

FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.

MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.

V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.

z (Powder Burn): Estimated propellant combustion percentage at bullet exit.

A valid access license is required to use the Personalized Load Calculator.

You can find more information in our FAQ: How can I use the Personalized Load Calculator?

Max Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Hodgdon Clays²<<locked>>33%16,563 psi28%1119 fps100%
Hodgdon TrailBoss²<<locked>>53%15,838 psi27%1093 fps100%
ReloadSwiss RS 14²<<locked>>53%16,041 psi27%1122 fps100%
Vihtavuori N32C Tin Star²<<locked>>41%17,361 psi30%1119 fps100%

Start Load - Barrel Length: 24"

PowderChargeFRMaxP%V(0)z
Hodgdon Clays²<<locked>>33%16,563 psi28%1119 fps100%
Hodgdon TrailBoss²<<locked>>33%9,224 psi16%863 fps100%
ReloadSwiss RS 14²<<locked>>33%9,224 psi16%883 fps100%
Vihtavuori N32C Tin Star²<<locked>>33%13,460 psi23%1001 fps100%

² fill rate low - you might want to consider using a filler to ensure proper ignition.

<<locked>> you need an access license to unlock this data.

Subsonic loads are filtered so the start load is at least 220 m/s and the maximum load does not exceed the speed of sound (≈343 m/s).

This overview compares 4 powders for .30-06 Spring. loaded with the .308 | 200gr | Lapua Subsonic in the subsonic range. ReloadSwiss RS 14 delivers the highest muzzle velocity at 1,122 fps; across all powders the maximum-charge window runs from 1,093 fps to 1,122 fps. Hodgdon TrailBoss gives the best case fill at 53 %, and 0 of the 4 powders fall inside the usable 80–100 % fill window.

Relative to the caliber's maximum pressure (405 MPa), the top charges use 27–30 %, leaving at least 70 % headroom. The 200.0 gr projectile in 0.308" calls for a 1:11.5 twist; slower twists will usually not stabilise this weight. Alliant Reloder-17, Hodgdon CFE223, Winchester 760 rank at the top here: for .30-06 Spring. with the .308 | 200gr | Lapua Subsonic they combine a high case fill with complete burn and sit in the upper velocity band. Hodgdon Clays, Hodgdon TrailBoss, ReloadSwiss RS 14 stay subsonic at start load. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.

← All subsonic load data