Load Specifications
Load data in caliber 9.3 x 62 with .366 | 175gr | Reichenberg Spezial Jagd bullet and 48 powders. The key underlying parameters are shown in the table above. The recommended powders for this cartridge and bullet combination are SNPE Vectan SP 10, ADI AR 2219 and Alliant Reloder-10x.
Important Notice: DO NOT go below Minimum Charge or above Maximum Charge. Since we have no control over the equipment and components used, any responsibility and liability for the results achieved is rejected.
Only powders/loads that match the current filter criteria are displayed: max pressure of a load ≤ 90% of max. standardized pressure, fill rate ≥ 80% and propellant combustion ≥ 95%. Use the sliders above the tables to adjust these thresholds.
Charge: Powder weight in grains. Start with the minimum load and work up carefully.
FR (Fill Rate): Case fill as a percentage. Values above 100% mean compressed loads.
MaxP / %: Maximum chamber pressure in bar and as a percentage of the standardized maximum for this caliber.
V(0): Muzzle velocity in feet per second (fps) at the standardized barrel length.
z (Powder Burn): Estimated propellant combustion percentage at bullet exit.
A valid access license is required to use the Personalized Load Calculator.
You can find more information in our FAQ: How can I use the Personalized Load Calculator?
Max Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 86% | 51,111 psi | 90% | 2841 fps | 100% |
| Accurate 2015ᴾ | <<locked>> | 100% | 50,676 psi | 90% | 2920 fps | 99.8% |
| Accurate 2460 | <<locked>> | 96% | 49,458 psi | 87% | 2920 fps | 97.9% |
| Accurate 2495ᴾ | <<locked>> | 100% | 45,353 psi | 80% | 2920 fps | 99.5% |
| Accurate 2520ᴾ | <<locked>> | 100% | 47,398 psi | 84% | 2936 fps | 97.1% |
| Accurate 4064ᴾ | <<locked>> | 100% | 37,173 psi | 66% | 2749 fps | 95.8% |
| Accurate LT-30 | <<locked>> | 90% | 48,515 psi | 86% | 2799 fps | 98.9% |
| Accurate LT-32 | <<locked>> | 90% | 49,008 psi | 87% | 2805 fps | 97.3% |
| ADI AR 2207 | <<locked>> | 88% | 49,211 psi | 87% | 2864 fps | 100% |
| ADI AR 2219 | <<locked>> | 92% | 50,386 psi | 89% | 2956 fps | 99% |
| Alliant AR-Compᴾ | <<locked>> | 100% | 48,080 psi | 85% | 2959 fps | 100% |
| Alliant Reloder-10x | <<locked>> | 94% | 49,574 psi | 88% | 2913 fps | 100% |
| Alliant Reloder-7 | <<locked>> | 88% | 50,908 psi | 90% | 2871 fps | 100% |
| Baschieri & Pellagri 106 | <<locked>> | 92% | 51,169 psi | 90% | 2848 fps | 99.3% |
| Hodgdon Benchmark | <<locked>> | 96% | 48,602 psi | 86% | 2844 fps | 96% |
| Hodgdon H322 | <<locked>> | 98% | 50,633 psi | 90% | 2963 fps | 99% |
| Hodgdon H335 | <<locked>> | 92% | 49,763 psi | 88% | 2943 fps | 98.1% |
| Hodgdon H4198 | <<locked>> | 90% | 51,169 psi | 90% | 2854 fps | 98.8% |
| Hodgdon TrailBossᴾ | <<locked>> | 100% | 32,097 psi | 57% | 1775 fps | 100% |
| IMR 3031ᴾ | <<locked>> | 100% | 41,191 psi | 73% | 2851 fps | 98.2% |
| IMR 4198 | <<locked>> | 94% | 51,024 psi | 90% | 2894 fps | 100% |
| IMR 4227 | <<locked>> | 82% | 48,457 psi | 86% | 2779 fps | 100% |
| Lovex D073.4 | <<locked>> | 90% | 50,560 psi | 89% | 2946 fps | 97.5% |
| Lovex D073.5 | <<locked>> | 94% | 47,659 psi | 84% | 2877 fps | 96.2% |
| Lovex D073.6ᴾ | <<locked>> | 100% | 45,005 psi | 80% | 2887 fps | 96.5% |
| Lovex S053 | <<locked>> | 84% | 50,183 psi | 89% | 2776 fps | 100% |
| Norma 200 | <<locked>> | 90% | 49,777 psi | 88% | 2897 fps | 100% |
| Norma 202ᴾ | <<locked>> | 100% | 46,673 psi | 83% | 2890 fps | 97.6% |
| ReloadSwiss RS 14ᴾ | <<locked>> | 100% | 31,952 psi | 56% | 1818 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 82% | 48,298 psi | 85% | 2815 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 94% | 48,573 psi | 86% | 2897 fps | 96.9% |
| Rottweil R 901ᴾ | <<locked>> | 100% | 50,821 psi | 90% | 2927 fps | 98.1% |
| Shooters World AR Plus | <<locked>> | 90% | 50,560 psi | 89% | 2946 fps | 97.5% |
| Shooters World Match Rifleᴾ | <<locked>> | 100% | 45,005 psi | 80% | 2887 fps | 96.5% |
| SNPE Vectan BA6 1/2 | <<locked>> | 86% | 48,472 psi | 86% | 2595 fps | 100% |
| SNPE Vectan SP 10 | <<locked>> | 92% | 51,024 psi | 90% | 2959 fps | 98.3% |
| SNPE Vectan SP 3 | <<locked>> | 94% | 49,443 psi | 87% | 2910 fps | 99.4% |
| SNPE Vectan Tubal 3000ᴾ | <<locked>> | 100% | 50,560 psi | 89% | 2854 fps | 98.1% |
| SNPE Vectan Tubal 5000ᴾ | <<locked>> | 100% | 40,393 psi | 71% | 2690 fps | 97.1% |
| Somchem S321 | <<locked>> | 96% | 49,255 psi | 87% | 2930 fps | 95.9% |
| Somchem S335ᴾ | <<locked>> | 100% | 48,588 psi | 86% | 2848 fps | 98.6% |
| Vihtavuori N120 | <<locked>> | 90% | 48,588 psi | 86% | 2802 fps | 100% |
| Vihtavuori N130 | <<locked>> | 96% | 49,298 psi | 87% | 2848 fps | 99.9% |
| Vihtavuori N133ᴾ | <<locked>> | 100% | 45,614 psi | 81% | 2799 fps | 99.3% |
| Vihtavuori N135ᴾ | <<locked>> | 100% | 40,147 psi | 71% | 2792 fps | 98.8% |
| Vihtavuori N140ᴾ | <<locked>> | 100% | 43,453 psi | 77% | 2805 fps | 97.3% |
| Vihtavuori N540ᴾ | <<locked>> | 100% | 43,265 psi | 76% | 2828 fps | 96.7% |
| Winchester 748 | <<locked>> | 98% | 51,126 psi | 90% | 2999 fps | 96.9% |
Recommended = one of the top powders for this cartridge and bullet combination.
Start Load - Barrel Length: 23.62"
| Powder | Charge | FR | MaxP | % | V(0) | z |
|---|---|---|---|---|---|---|
| Accurate 1680 | <<locked>> | 80% | 41,669 psi | 74% | 2680 fps | 99.4% |
| Accurate 2015 | <<locked>> | 82% | 28,340 psi | 50% | 2454 fps | 95% |
| Accurate 2460 | <<locked>> | 90% | 39,943 psi | 71% | 2746 fps | 95.7% |
| Accurate 2495 | <<locked>> | 86% | 28,108 psi | 50% | 2533 fps | 95% |
| Accurate 2520 | <<locked>> | 96% | 40,785 psi | 72% | 2815 fps | 95.4% |
| Accurate 4064 | <<locked>> | 98% | 34,911 psi | 62% | 2700 fps | 95% |
| Accurate LT-30 | <<locked>> | 80% | 35,636 psi | 63% | 2546 fps | 96% |
| Accurate LT-32 | <<locked>> | 84% | 40,799 psi | 72% | 2651 fps | 95.3% |
| ADI AR 2207 | <<locked>> | 80% | 38,392 psi | 68% | 2674 fps | 100% |
| ADI AR 2219 | 51.8 gr | 80% | 33,808 psi | 60% | 2615 fps | 95% |
| Alliant AR-Comp | <<locked>> | 80% | 25,556 psi | 45% | 2428 fps | 96.2% |
| Alliant Reloder-10x | 47.3 gr | 80% | 32,068 psi | 57% | 2559 fps | 97.6% |
| Alliant Reloder-7 | <<locked>> | 80% | 39,711 psi | 70% | 2671 fps | 99.5% |
| Baschieri & Pellagri 106 | <<locked>> | 80% | 34,766 psi | 61% | 2539 fps | 96.1% |
| Hodgdon Benchmark | <<locked>> | 94% | 45,658 psi | 81% | 2792 fps | 95.3% |
| Hodgdon H322 | <<locked>> | 86% | 34,708 psi | 61% | 2638 fps | 95.3% |
| Hodgdon H335 | <<locked>> | 84% | 37,913 psi | 67% | 2713 fps | 95.3% |
| Hodgdon H4198 | <<locked>> | 80% | 37,898 psi | 67% | 2598 fps | 96% |
| Hodgdon TrailBoss | <<locked>> | 80% | 23,685 psi | 42% | 1588 fps | 100% |
| IMR 3031 | <<locked>> | 92% | 32,285 psi | 57% | 2635 fps | 95.3% |
| IMR 4198 | <<locked>> | 80% | 34,055 psi | 60% | 2562 fps | 98.8% |
| IMR 4227 | <<locked>> | 80% | 45,716 psi | 81% | 2736 fps | 100% |
| Lovex D073.4 | <<locked>> | 84% | 40,437 psi | 71% | 2759 fps | 95% |
| Lovex D073.5 | <<locked>> | 92% | 44,556 psi | 79% | 2822 fps | 95.4% |
| Lovex D073.6 | <<locked>> | 98% | 41,945 psi | 74% | 2831 fps | 95.8% |
| Lovex S053 | <<locked>> | 80% | 44,831 psi | 79% | 2690 fps | 100% |
| Norma 200 | <<locked>> | 80% | 36,405 psi | 64% | 2644 fps | 99.2% |
| Norma 202 | <<locked>> | 94% | 38,580 psi | 68% | 2733 fps | 95.6% |
| ReloadSwiss RS 14 | <<locked>> | 80% | 23,511 psi | 42% | 1624 fps | 100% |
| ReloadSwiss RS 36 | <<locked>> | 80% | 45,411 psi | 80% | 2766 fps | 100% |
| ReloadSwiss RS 40 | <<locked>> | 90% | 42,540 psi | 75% | 2785 fps | 95.4% |
| Rottweil R 901 | <<locked>> | 90% | 37,898 psi | 67% | 2677 fps | 95% |
| Shooters World AR Plus | <<locked>> | 84% | 40,437 psi | 71% | 2759 fps | 95% |
| Shooters World Match Rifle | <<locked>> | 98% | 41,945 psi | 74% | 2831 fps | 95.8% |
| SNPE Vectan BA6 1/2 | <<locked>> | 80% | 41,495 psi | 73% | 2487 fps | 100% |
| SNPE Vectan SP 10 | 56.3 gr | 84% | 39,131 psi | 69% | 2733 fps | 95.6% |
| SNPE Vectan SP 3 | <<locked>> | 80% | 31,575 psi | 56% | 2539 fps | 95.3% |
| SNPE Vectan Tubal 3000 | <<locked>> | 92% | 39,349 psi | 70% | 2651 fps | 95.6% |
| SNPE Vectan Tubal 5000 | <<locked>> | 96% | 35,723 psi | 63% | 2589 fps | 95.7% |
| Somchem S321 | <<locked>> | 94% | 45,876 psi | 81% | 2871 fps | 95% |
| Somchem S335 | <<locked>> | 90% | 35,897 psi | 63% | 2602 fps | 95.7% |
| Vihtavuori N120 | <<locked>> | 80% | 35,969 psi | 64% | 2582 fps | 100% |
| Vihtavuori N130 | <<locked>> | 80% | 30,371 psi | 54% | 2461 fps | 96.7% |
| Vihtavuori N133 | <<locked>> | 86% | 30,081 psi | 53% | 2464 fps | 95.5% |
| Vihtavuori N135 | <<locked>> | 90% | 28,993 psi | 51% | 2526 fps | 95.4% |
| Vihtavuori N140 | <<locked>> | 94% | 36,027 psi | 64% | 2651 fps | 95.1% |
| Vihtavuori N540 | <<locked>> | 96% | 37,927 psi | 67% | 2717 fps | 95.2% |
| Winchester 748 | <<locked>> | 94% | 44,585 psi | 79% | 2877 fps | 95.3% |
Recommended = one of the top powders for this cartridge and bullet combination.
ᴾ possible press load - work up slowly to this load while watching for signs of excessive pressure.
This overview compares 76 powders for 9.3 x 62 loaded with the .366 | 175gr | Reichenberg Spezial Jagd. Alliant Power Pro 1200-R delivers the highest muzzle velocity at 3,028 fps; across all powders the maximum-charge window runs from 1,775 fps to 3,028 fps. Accurate 2015 gives the best case fill at 100 %, and 76 of the 76 powders fall inside the usable 80–100 % fill window.
Relative to the caliber's maximum pressure (390 MPa), the top charges use 56–90 %, leaving at least 10 % headroom. Accurate 2015, Accurate 2495, Accurate 2520 reach 100 % fill or more at maximum charge, so these are compressed loads: they need a long drop tube to seat cleanly and react sensitively to the case capacity of your own brass lot. SNPE Vectan SP 10, ADI AR 2219, Alliant Reloder-10x rank at the top here: for 9.3 x 62 with the .366 | 175gr | Reichenberg Spezial Jagd they combine a high case fill with complete burn and sit in the upper velocity band. As outliers, Accurate 2200, Accurate 2230, ADI AR 2206H burn incompletely and react more sensitively to barrel length and temperature. Always begin at the start load and work up in small increments while checking case and primer for pressure signs.